similar to: Strange unexplainable CUPS problem after upgrade to 5.10

Hi again Thank you all for helping me out, really appreciate it. Works like a charm now, I added [global] printing = cups printcap name = lpstat load printers = yes and in [printers]-section: [printers] comment = All Printers path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes

Hi there I just installed the above mentioned system and try to print from a W2k box to the Samba box but nothing happens. There's no problem in printing from the RH box or via Webmin but when I try to print from the W2k box nothing happens. I don't get an error or anything. I installed the printer by the help of the add printer tool in RH, and simply go to the Printer--->Add

I've about run out of ideas and need some help. I have an HP OfficeJet 7110 installed on my Fedora Core 3 box. From Linux, it prints perfectly, the Test Page works, I can print from Mozilla/Thunderbird/Firefox, KDE applications, and even Emacs, all without any issues whatsoever. The problem is I can't seem to get it to work when I share the printer to Windows. I've shared it to

hi. I am trying to get print working and have a hard time indeed... My goal is to replace our nt4 print server with a linux/samba one as we have problems serving printers and drivers to win2000 workstations (and I don't want to set up a win2000 server for printing, and have the same problem _again_ when switching to XP ;-) The situation so far : - Debian woody - Samba 2.2.4-1 - Winbind

We have a networked HP OfficeJet All-In-One. I have the scanner working with the CentOS 5.3, except xsane is ignoring SANE_DEFAULT_DEVICE. scanimage does however take this environment variable just fine: server1.wendellfreelibrary.org% scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the

Hi all, I'm new to this list, as to SAMBA, and I'm struggling with getting a printer to work as a shared printer in a Windows network with a redhat 9 server. The printer is a HP 4550 Color LaserJet, installed with CUPS to the server, via JetDirect (port 9100). It prints testpages fine from the Linux-server. It was installed with the install-printer-utility in RedHat9. I have then shared

I've got a server with multiple virtual interfaces. Now, I only want CUPS to advertise on *one* - eth0, not eth0:1 or eth0:gad.... Looking at the CUPS manual, and cuppsd.conf man page, I see BrowseAllow, but the entries are not clear enough for me to understand what they mean. (Yeah, I know the docs are better than they were - read ESR's rant about it from a few years ago.) Specifically,

Hi, I'm trying to use Cups + Samba to make a print server for many purpouses. The main one is to account how many pages where printed by whom and centralize all printers in one server. If I configure samba and cups in the RAW mode using windows original drivers of the printers, everything works fine, but this way I can't use cups accounting. So I reinstaled all my printers

Using samba 3.4.9 and cups 1.4.3 I have "printing = cups", but for some reason samba is not picking up the cups printers or creating the printers share. The problem is obviously this, from the samba logs: [2011/03/28 14:09:43, 0] printing/print_cups.c:103(cups_connect) Unable to connect to CUPS server localhost:631 - Connection refused However, cupsd is most certainly listening

Hi all, I have set up a printer in cups and I can see it with lpstat -a, and I can print to it. I put what I thought was the appropriate stuff in smb.conf, and yet no printer shows up to the NT client I'm testing with, or in smbclient -L output. Any ideas at all? Here is the relevant info: ### smb.conf excerpts ### [global] ... printing = cups printcap name = cups printcap cache

Samba server does not list/return share type of Printer. It only does Disk and IPC$. In /etc/samba/smb.conf, [global] section has load printers = yes cups options = raw printcap name = /etc/printcap #obtain list of printers automatically on SystemV ; printcap name = lpstat printing = cups There is this section. [printers] comment = All

Dear All, after changing my Linux box to Samba 2.2.3a and CUPS I'm struggling with some probleme :

Hello, I've got a centos 5 machine running the latest cups rpm v1.2.4. I've included my config minus comments below. My problem is via a web browser i can access the / resource without a problem, but when either clicking on any admin function or direct browsing to an admin address /admin i get a message error 426 upgrade required and i'm told i have to connect to an https address

We have been using CUPS to handle printing and have run into some "features" some of which a fresh install of the responsible server will probably fix. However there are some disparities between the documentation and our practical experience for which a clear statement would help others. The docs state when using CUPS the relevent lines of SMB.CONF should look like this: printing=cups

Ok... here we go, I have a server running RH 7.3, samba 2.2.3a, and CUPS 1.1.14. All the printers we have are networked printers sitting off of Linksys printservers. On this server I am sharing all off our printers out via Samba. See my smb.conf file below. This server works perfectly. All printers are shared out successfully. Primary CUPS server: [global] workgroup = NEW

G'day all I have a windows 2000 machine with a shared printer. Can any one recomend a good howto to set up samba to use that shared printer. Thanks

Hi all! Please help me... Scenario: - linux box, turned on only for developing and printing purposes, printing uses cups and samba - 2 winXP box most of the time turned on The following happened: - installed the latest gentoo distro, updating all the time, prinitng worked fine for couple weeks - 2 days ago it started not to print What I discovered: - after linux box boot it didn't print

I am running wine 20050725 under KDE/Debain/testing with binaries from deb http://wine.sourceforge.net/apt/ binary/ on the client in question. I am trying to print from QuickBooks 6 to a printer server (Brother HL1240) running cups 1.1.18. The client is accessing the printer from kprinter and printing from the native Linux applications with no problem. When I try to print from QuickBooks I

When I try to connect to * using a Cisco ATA 188 configured with a MGPC firmware (v3.1.1), I just keep getting this message every 30 seconds or so : May 10 10:08:21 NOTICE[7913]: chan_mgcp.c:1509 find_subchannel: Gateway '192.168.1.27' (and thus its endpoint '*') does not exist Using tcpdump, I have checked that the ATA188 (with IP 192.168.1.27 and port 2427) sends UDP packets to

Hey Y'all, I've been trying for months to get samba to share my printer with my wife's Win XP machine. I've RTFM, and spent hours on google to no avail. I can't see the printer from Windows so I can't mount it up. Nothing appears in the logs. The file shares work just fine. It looks like I've got Samba 3.6.9 on this machine: [mlapier at mushroom samba]$ rpm -qa