similar to: FreeBSD 10 Beta 2: make installkernel failure with installer provided ZFS configuration.

I have samba 4.3 running on FreeBSD 10.2 on ZFS and I am unable to create new GPOs, getting "invalid Parameter" response.Log files indicate ACL issues. Domain was provisioned with --use-ntvfs option.Filesystem is mounted with this options:zroot/ROOT/default on / (zfs, local, noatime, nfsv4acls) acl options on zfs are this:zroot/ROOT/default aclmode passthrough inherited from

Hi, I am using FreeBSD 8.2 and went to add 4 new disks today to expand my offsite storage. All was working fine for about 20min and then the new drive cage started to fail. Silly me for assuming new hardware would be fine :( The new drive cage started to fail, it hung the server and the box rebooted. After it rebooted, the entire pool is gone and in the state below. I had only written a few

Hi, I have Orinoco 802.11b PC Card from Proxim. I plugged it to pcmcia slot, but It doesn't work - no blinking LEDs, no wi0 in ifconfig. I have 7.1-PRERELEASE, laptop Prestigio Nobile 157. On NetBSD seems working, but NetBSD is not friendly with me. if_wi driver included in kernel. ----- dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,

I recently put together a new machine w/ a SuperMicro H8SCM and an AMD Opteron 4228 HE... I've having an issue where the clock on the machine skips around... The wierd part is that it's very sudden when it happens... ntp sometimes brings it back, but it can't when the clock gets too far ahread (1000 seconds), ntp dies... In order to catch it happening, I ran a sleep 60 loop

Hi there, from time to time my PC panics when I insert an empty DVD or CD-R. The kernel locks up instantly after the DVD writer's tray is closed. It seems burning the first DVD isn't critical but inserting the second one seems susceptible. I use k3b as software, which polls the hardware while the tray is open, maybe it's something with hald. Don't know, just use this. I

I was using a GELI partition for /usr/home on 7.0, so it attaches and mounts on boot. The problem is it stopped working after the system was upgraded to RELENG_7/7.1-PRERELEASE. Here's how it goes: I have the following /etc/fstab: /dev/ad0s1b none swap sw 0 0 /dev/ad0s1a / ufs rw 1 1 /dev/ad0s1d

Overnight I was running a zfs send | zfs receive (both within the same system / zpool). The system ran out of space, a drive went off line, and the system is degraded. This is a raidz2 array running on FreeBSD 8.1-STABLE #0: Sat Sep 18 23:43:48 EDT 2010. The following logs are also available at http://www.langille.org/tmp/zfs-space.txt <- no line wrapping This is what was running: #

Hi, Is there a way to tell / narrow down if an issue with errors like below are due to a bad cable or bad port multiplier ? The disks in a particular cage are throwing errors like these below. (RELENG9 from today) siis0 at pci0:5:0:0: class=0x010400 card=0x71241095 chip=0x31241095 rev=0x02 hdr=0x00 vendor = 'Silicon Image, Inc.' device = 'SiI 3124 PCI-X Serial

Greetings! I''ve got a FreeBSD-based (FreeNAS) appliance running as an HVM DomU. Dom0 is Debian Squeeze on an AMD990 chipset system with IOMMU enabled. The DomU sees six physical drives: one of them is a USB stick that I''ve passed through in its entirety as a block device. The other five are SATA drives attached to a controller that I''ve handed to the DomU with PCI

Hello there, I've got a question about SATA. I've got ASUS P5GC-MX/1333 with ICH7. (SATA2 support) A few HDD with SATA2. system: uname -a FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #1 r246666: Tue Feb 12 00:19:07 MSK 2013 root at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 camcontrol info camcontrol iden ada2 pass2: <ST3500320AS SD1A> ATA-8 SATA 2.x

Hello, I am setting up a new (remote) server. I initially installed 9.2 RC4 amd64 because that's what the data center put in the drive for me. Shortly thereafter I downloaded 9.2-STABLE sources and compiled world and a generic kernel. While doing so the system became unreachable by SSH The SSH sessions appeared to connect but there was never any data returned. I could telnet to port 22

On 19 Jun 2013, at 13:34, Roger Pau Monné <roger.pau@citrix.com> wrote: > > Could you provide the boot log of the DomU, backtrace, Xen version and > Dom0 kernel version? I did not have a console attached when it rebooted, so I did not have a log of the initial boot. Now that I did, I see that it fails to mount its root volume. It had been running previously on pvhvm_v10 for about

Hi all, I have an issue for setting windows acl using smbcacls command under NFS mount folder, but smbcacls seems to not work. And the error was showed by ERROR: security descriptor set failed: NT_STATUS_NOT_SUPPORTED. I wonder to know if other ways to set security.NTACL attribute in NFS. Thank you, Jeremy

On Mon, May 11, 2020 15:27, Rowland penny wrote: > >> > If you want my advice (for what it is worth), try jumping OS, Use the > latest Debian (or Devuan) with ext4 for the filesystem, this is > guaranteed to work. Using FreeBSD as a Samba AD DC has always been a > problem because of the filesystem. Not an option here. > > You may be able to get it working on ZFS, but I

On Tue, May 12, 2020 09:46, Rowland penny wrote: > One problem is that ZFS uses NFSv4ACLS and a Samba AD doesn't, it > expects POSIX ACLS, there also is a possibility that xattr may be > another problem. > > Try reading this: > > https://bugzilla.samba.org/show_bug.cgi?id=12912 > I have worked with Timur on this very problem in the past. And he has produced in

On Wed, Feb 15, 2023 at 08:06:28PM +0100, Conor Armstrong wrote: > Rowland & Jeremy - thanks for this! > I built a copy of the latest version from github 4.19 and same issue > arises. ? > I will have a look at the wireshark trace and see if I can spot anything > obvious there. > I'm not an expert on this, but as far?as I know NFS isn't fully POSIX >

I'm trying to get to the bottom of where the normal directory functions differ in results for block storage compared to NFS. I created a short c script to look at the offsets generated for the directory when block storage backed in comparison to NFS backed. block storage backed are always positive: File: 5050, Offset: 9213006461214587617 File: 6567, Offset: 9218690536865144001 File: 4033,

Hello, I've met some quite strange reboots recently on my home gateway. I'm trying to reduce its power consumption, so I've loaded the cpufreq(4) driver, and enabled powerd. After this the box started to reboot randomly all over the place. I started to think what can cause the trouble, removing the cpufreq(4) support would be too trivial, so I've removed the ALTQ references from

hi, i have raid1 on zfs with 2 device on pool first device died and boot from second not working... i try to get http://mfsbsd.vx.sk/ flash and load from it with zpool import http://puu.sh/2402E when i load zfs.ko and opensolaris.ko i see this message: Solaris: WARNING: Can''t open objset for zroot/var/crash Solaris: WARNING: Can''t open objset for zroot/var/crash zpool status:

Good morning, I have a problem with ZFS: ZFS filesystem version 4 ZFS storage pool version 15 Yesterday my comp with Freebsd 8.2 releng shutdown with ad4 error detached,when I copy a big file... and after reboot in 2 wd green 1tb say me goodbye. One of them die and other with zfs errors: Apr 24 04:53:41 Flash root: ZFS: vdev I/O failure, zpool=zroot path= offset=187921768448 size=512 error=6