similar to: passthrough failure on Radeon HD 6450.

Dom0: Wheezy 64 bit with kernel from package linux-image-3.2.0-4-amd64 version 3.2.41-2+deb7u2, package blktap-dkms and all dependency packages for xen, spice and usb redirection. Seabios 1.7.2-3 and latest spice and usbredir compiled from debian unstable sources. ------------------------- /etc/modules ------------ loop max_loop=64 xenfs xen-evtchn blktap ------------------------- git clone

hi, dq45cb has two display controllers as below and two display interface DVI-I 和 DVI-D. 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Question 1: Is it possible to assign two controller to two guest VMs respectively? Question

Legacy (non-pvops) gntdev drivers may require this operation to be performed when the number of grants intended to be used simultaneously exceeds a certain driver specific default limit, and qemu''s qdisk driver is an example of needing to do so. Signed-off-by: Jan Beulich <jbeulich@suse.com> --- a/tools/libxc/xc_linux_osdep.c +++ b/tools/libxc/xc_linux_osdep.c @@ -541,6 +541,27 @@

Hi, next step, # dmesg | grep pciback Bootdata ok (command line is root=/dev/sda2 ro console=tty0 pciback.hide=(0000:02:05.0)(0000:02:06.0)(0000:02:07.0)(0000:02:08.0)(0000:02:09.0) ) Kernel command line: root=/dev/sda2 ro console=tty0 pciback.hide=(0000:02:05.0)(0000:02:06.0)(0000:02:07.0)(0000:02:08.0)(0000:02:09.0) Unknown boot option

Hi- I am trying to pass an LSI SAS2008-based HBA (IBM M1015) through to an HVM Solaris VM, using Xen 4.2 unstable and the qemu-traditional device model. On boot I see the following error: MPT BIOS Fault 09h encountered at adapter PCI(00h,05h,00h) A list search yielded (http://comments.gmane.org/gmane.comp.emulators.xen.devel/128172), however there was no solution for an HVM VM. I''ve

On Fri, May 5, 2017 at 12:52 PM, Nikolaos Milas <nmilas at noa.gr> wrote: > On 5/5/2017 1:42 ??, Nikolaos Milas wrote: > > Hmm, it seems that the boot flag should be removed from /dev/vda2 >> partition? >> > > Actually, I tried this and left the boot flag only to /dev/vda1. I > rebooted and I am still getting the same error. :-( > > I was hoping we were

Assuming I have a firewire card with a supported chipset, is there anything special I need to do in order for the kernel to recognize the card? Shouldn't kudzu "wake up" and configure the card when I boot up after installing it? This is a brand spanking new 4.4 system and a supported Agere chipset firewire card. I'm having trouble tickling devices connected to the card.

[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-rc3+ (airlied at crackbookpro) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #44 SMP Sat Dec 5 16:05:39 AEST 2015 [

Hello all, this mail is related to a post by Axel Schöner that I found at http://article.gmane.org/gmane.comp.emulators.xen.user/40621 when I was searching the WEB about solutions to my problem. I would like to confirm that VT-d with XEN 3.3 kernel 2.6.18.8 on mainboard Intel DQ45CB seems to be broken. Survey (details are down below) --------------------------------------- Whenever I boot my

I'm having some trouble here - need some help! I've just bought a TE405p (32-bit 5V), but cannot get it working in a dell 6450. The dell has (from tech specs) "three peer PCI buses: two 64-bit buses and one 32-bit bus Expansion slots seven hot-pluggable PCI slots (two 64-bit/66 MHz, four 64-bit/33 MHz, and one 32-bit/33 MHz)" I cannot get the card working in any of the slots.

Hi All, We've had a report[1] of the virt_blk driver causing a lot of spew because it's calling a sleeping function from an invalid context. The backtrace is below. This is with kernel v3.16-rc2-69-gd91d66e88ea9. The reporter is on CC and can give you relevant details. josh [1] https://bugzilla.redhat.com/show_bug.cgi?id=1113805 [drm] Initialized bochs-drm 1.0.0 20130925 for

Hi All, We've had a report[1] of the virt_blk driver causing a lot of spew because it's calling a sleeping function from an invalid context. The backtrace is below. This is with kernel v3.16-rc2-69-gd91d66e88ea9. The reporter is on CC and can give you relevant details. josh [1] https://bugzilla.redhat.com/show_bug.cgi?id=1113805 [drm] Initialized bochs-drm 1.0.0 20130925 for

Hi, i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19 with xen-4.0.1rc5. Due some reason the system freezes from time to time. I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn''t write anything to serial console so there are no errors or something like that. Perhaps there is something to see from the logs ... Hardware Board: Intel DQ45CB CPU:

Hi, once again, Problems with pciback and pci passthrough the system -------------------------------------------------------------------------------- DOMAIN0:~# lspci -tv -[0000:00]-+-00.0 nVidia Corporation nForce3 250Gb Host Bridge +-01.0 nVidia Corporation nForce3 250Gb LPC Bridge +-01.1 nVidia Corporation nForce 250Gb PCI System Management +-02.0

I am installing dahdi on a machine lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Unknown device 9602 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD]

I have a hardware here with 9 NICs (8 of them on-board) and I want to set up 8 NICs as real network interfaces, one for each xen domain. The 9th NIC should be Domain-0 which is working well. Currently I have only set up one domain which is running in bridged mode at the moment. I am currently trying to set up a second domain which uses eth2 but I didn''t succeed. I want to get the

Hi, As it has been brought to my attention (by several parties), my current MB does not support VT-d. Since I don''t feel like purchasing a brand new system, I have searched for replacement MB-s that would fit into my existing uATX case, support my C2D CPU, and support at least 4x2GB ram. I have narrowed it down to the following four models: SUPERMICRO MBD-C2SBM-Q-O (Q35 chipset)

Today I updated several servers running CentOS 4.3, and got the new 2.6.9-42 kernel. One of the machines serves as our firewall. After rebooting I lost all forwarding thru the machine. I reverted back to the 2.6.9-34 kernel and connectivity returned. During the few minutes that the new kernel was running I checked that the routing table looked OK, and with tcpdump I saw that indeed no traffic

Package: xen-hypervisor-3.4-amd64 and linux-image-2.6.32-5-xen-amd64 Version: 3.4.3-1 and 2.6.32-15 Hello all, GRUB-PC does not automatically populate Xen related parameters in /boot/grub/grub.cfg so I added them manually (see below). All the packages involved on my Dell PowerEdge R710 running Debian GNU/Linux Squeeze AMD64 are from the Squeeze repository. There are four (4) 1TB SATA HDD

Dear all, after having bad experiences with nouveau (using fedora 15,16,17) , which resulted in an immediate lockup of my old server machine, i have given noveau another chance to run on kernel The good is news is - it doesn't lead to immediate lockup of the machine anymore. The bad news. It still leads to a scrambled console screen, which does not contain any useful information. It