similar to: Centos 5 scsi adapter support

Bug report follows. Please CC me if you want me to read the reply, as I'm not subscribed to ext3-users. [1.] One line summary of the problem: Ext3 has just causing filesystem corruption which required fsck to fix. [2.] Full description of the problem/report: I just had my machine lock up with an ext3 oops, preceeded by a bunch of error messages in the logs. On rebooting, after replaying the

Hello, does CentOs 5 supports an Adaptec AHA-2940W/2940UW scsi controller (pci)? Is this controller maybe supported by the aic7xxx driver? I want to install CentOS 5 on my desktop pc but the currently installed pci scsi controller for my scanners (drivers: 2x tmscsim, 1x advansys) are not supported by CentOS. So I am searching for something else. Thanks in advanced. regards Olaf

Hello, Under Fedora Core 6 I used to integrate the soundcard of my notebook with modprobe snd-opl3sa2. Now, after changing my system to CentOS 5, I could not find this module for my isa soundcard any more. # ls -al /lib/modules/2.6.18-8.1.1.el5/kernel/sound/isa/ insgesamt 24 drwxr-xr-x 3 root root 4096 27. Apr 04:09 . drwxr-xr-x 9 root root 4096 26. Apr 18:15 .. drwxr-xr-x 2 root root 4096 27.

Hello, since upgrading to CentOS 5.2 my notebook hangs while booting with a "Kernel panic - not syncing: Fatal exception" error. Here is a screenshot: http://www.istari.de/olaf/centos/r0013878.jpg # uname -a Linux beutelsend.istari.de 2.6.18-53.1.21.el5 #1 SMP Tue May 20 09:34:18 EDT 2008 i686 i686 i386 GNU/Linux # grep kernel /etc/grub.conf kernel /vmlinuz-2.6.18-92.1.1.el5

Hi, I'm using Firestarter as my firewall. If I restart the network or my DSL line goes down, I have to manually restart Firestarter. I have sh /etc/firestarter/firestarter.sh stop and then sh /etc/firestarter/firestarter.sh start in my ip-up.local file. I confirmed ip-up.local us being executed by placing an entry in the logs, but it appears firestarter is not or at least not correctly.

OK, I am building the new CentOSPlus kernel for i386/x86_64. It is based on the 2.6.9-42.EL kernel that will be part of CentOS-4.4. Currently it has all the features of the older plus kernels and all the items turned on by the upstream provider in their main kernel ... except that XFS is being removed from this kernel (and added by a standalone module that has newer sgi code for xfs). I am not

Hello, I am using a self compiled kde-3.5.10 from ftp.kde.org as a desktop system under CentOS 5.4. Does anybody knows where to get a cve-2010-0436 patch (kdebase, kdm) for kde-3.5.10? Thanks! regards Olaf

Hello, in my CentOS-Base.repo file there is a line baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch and yum update said 'nothing to do'. Then I change this line to baseurl=http://mirror.centos.org/centos/5.1/updates/i386 and yum updates firefox, squid, sos and so on. That happens on two of my computers, reproducible. Does yum sometimes forget it's release

Hello, if login as user I get the following error message in ~/.xsession-errors*: /etc/X11/xinit/Xsession: line 15: unask: command not found Changing 'unask' to 'umask' seems to fix it. This happens under CentOS 5 and 5.1. regards Olaf

Hello, just a short hardware question. Does CentOS 5.3 supports a Leadtek LR2960 (model S26361-D1910-V128, agp, 128mb) graphic card with a nVidia GeForce FX5200 chip and dual dvi? Thank you very much! regards Olaf

Hello, I have a CentOS 5.2 server that exports /home on the local network for 2 users by secure nfs4 with kerberos krb5p. The clients are a notebook and a desktop pc. The following error is always reproducible on all clients. If running the clients on high load, that means for example 5 firefox windows open and connected with www pages from the internet, installing the new qt development

Hello, since today I could not update my CentOS 5.3 system with yum cause of the following error message. # yum update [...] Resolving Dependencies --> Running transaction check ---> Package exiv2.i386 0:0.18.2-1.el5.rf set to be updated ---> Package perl-Params-Util.i386 0:1.00-1.el5.rf set to be updated ---> Package perl-Moose.noarch 0:0.86-1.el5.rf set to be updated -->

Hello, if running 'yum update' on a CentOS 5.3 workstation, that was upgraded from CentOS 5.2, I run into the following error with perl. [...] Resolving Dependencies --> Running transaction check ---> Package perl.i386 4:5.8.8-18.el5_3.1 set to be updated Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:],

Given a path to a SCSI device, e.g. "DEV=/dev/st1", I need to find the name of the kernel module for the SCSI host adapter that controls that target. The objective is to be able to unload and reload the kernel module when the drive gets into a state that requires a SCSI bus reset for recovery. The best I've been able to come up with so far is: SCSIMOD=$(cat

Is it possible to access hardware cards from guests ? In particular SCSI adapter ? Thanks a lot. -- This message posted from opensolaris.org

I have a very old system which has a self compiled kernel. It' supports sata and megaraid but not LSI SCSI or BUSLOGIC scsi. I am not sure what SCSI adapter is being used on CentOS KVM host and there for what kernel options to enable in the new compiled kernel. I have tried to add LSI logic and it seems like still not recognizing the SCSI device. I have another kernel that do work but it was

From: Harald Finn?s > You seem to know what you're talking about, Seems v. Knows is a whole new ballgame. But I have been deploying SCSI on Linux since 1993 (Advansys, now owned by LSI, was the first vendor to formally support Linux), SCSI RAID on Linux since 1997 (large ICP-Vortex), through 3Ware's original FPGA ASIC designs in the AccelATA and Escalade 5000 series in 1999+. For a

Hi all, I'm looking now for day's for this problem but i don't find the solution. I have tried several solutions/setup like: https://lists.samba.org/archive/samba/2011-May/162571.html I have a working ldap server for my mail-server and want to extend this to a samba server also. when a user connect (without success) I see this error in the logs: Nov 28 09:24:44 app-04 smbd[11865]:

Hello, I have the following hardware configuration. Tyan 2466N motherboard, 1.03 BIOS, 2 Athlon-MP 1800+ CPUs, 512MB registered ECC DRAM, Onboard 3Com NIC (xl type) Radeon 8500 AGP video card Adaptec 3210S SCSI RAID controller Comtrol RocketPort 8 port PCI serial card I have started to experience some odd system lockups in the past couple months, and it seems to be getting worse. I particular,

Hello Got strange problem with high system "%system load" and very slow user level programs (apache+php+mysql) behavior gstat shows 1.5-4% hard disk busy load but system shows about 20-30% load while user load is max 5%. vmstat shows from 2 to 35 process in "b" state. Now use 7.0-RELEASE-p5 , but the same problem was with 7.0-RELEASE. And have no idea what to do with this.