similar to: Hack

Anyone having issues with endpoint call forwarding on asterisk 11? Was working perfect with 10. Issues are not phone related have tried cisco, polycom and Xlite, all fail. Backtrack to 10 and it works ok again. Any help is appreciated. Thanks John Bittner CTO [cid:image003.png at 01CE76D7.8AB33690] 380 US Highway 46, Suite 500 Totowa, NJ 07512 Phone: 201.806.2602 x2405 Fax:

Guys, I need you help on this one. Don't know when this broke but we have a custom gui that runs on top of Asterisk running a real-time static for configurations. Nothing has changed with the database other than upgrades of Asterisk 10. Customer complained that there password was not changing when they called into voicemail and changed it. Database is running standard ast_config with the

Anyone know how to disable DNS in asterisk so PJSIP still works when the internet goes down. I tried a few things but nothing is working. I even installed BIND on the asterisk box ...that didn't even work. Once I pull the plug on the internet, I cant dial anything. John Bittner CTO [xaccellogoemail] 380 US Highway 46, Suite 500 Totowa, NJ 07512 Phone: 201.806.2602 x2405 Fax:

Anyone know how someone can hack an asterisk box and register with every single account on the box. This box only has 3 accounts, with very complex passwords. Have VoIP blacklist setup and fail2ban... The hackers were able to make 2 calls to Cuba before my alerting system texted me. I am running asterisk 16.3 with PJSIP. This is my only box open to the outside world, a requirement for this one

To all: No matter what I try, I cannot get the system to wait for the admin to join. It just dumps users into the bridge directly. I do not have a pin for users, does that matter? What am I missing? Another issue the absolute timeout is not working ? ... have recordings that last for over 24 hours... and this should not happen... All calls should hangup after 4 ? Any ideas ? Any help is much

Guys, I have a customer that heavily uses modems, the problem they don't work reliably with some of the carriers I have used like Level3. This is somewhat expected due to the limits in VoIP so I need a better solution. If I set up an asterisk system on customer premise with an FXS card in it and have calls sent to another asterisk box with a PRI can I get this to be more reliable and better

Hello, Anyone know how to set the "To:" in an invite for PJSIP to custom settings. I got the "from" to be the way I need it. From: <sip:e04f43a2ed59 at xaccel.net;tag=44l1nRmW2 To: "TEST" <sip:5tf2f2s0rbtdj-20d14fl6n65t0o-0u03 at 34.221.174.202> I have tried a lot of changes to get to this but nothing works. I am getting this From: sip:109643183 at

Hello Anyone have a working copy of Fail2ban asterisk filter asterisk.conf for Asterisk 16 running PJSIP. I have tried 10 different filters but none of them show any matches when testing with fail2ban-regex I see date template hits but no matches.... My log [2019-06-06 15:37:20] NOTICE[18081] res_pjsip/pjsip_distributor.c: Request 'REGISTER' from '"2405" <sip:2405 at

Hello, I am looking for a consultant that know asterisk in and out including how to troubleshoot sip and rtp. I have a device that this acting very strange and I need to prove it's the device code and not an issue with my setup. Very simple setup, all local no nat... Grandstream video phone and a AIphone IX-MX7 door station. PJSIP ... doorstation to grandstream 3370 works perfectly. Early

Anyone see this before? I have a main Asterisk box 11.4 connected to Windstream via SIP trunks in my colo. So as a did comes in they are routed to appropriate customers, in this case another asterisk 11.4 box. All is working well with the exception of DTMF. Losing the last digits so say someone hits 123... on the customer box I only get 12 This is the weird part, it only happens on 1 DID. If I

Hello, I cannot find much on examples but I did find one in Russian that shows this to use + or - the time difference from GMT. I have been testing and it does not work. 1st question do includes work with timezone include => day,08:00-17:00,mon-fri,*,*,[+5] Not sure on the formatting, is it correct ? ... I tried without the brackets... that also doesn't work. If not supported in

Hello all, Running Asterisk 16.10.1 Does anyone know what this means? rtp_recvfrom: PJ ICE Rx error status code: 70004 'Invalid value or argument (PJ_EINVAL) How can I find what value it doesn't like ? I switched to a few different stun servers and I still get the same error. Calls still go through Any help is much appreciated. Thanks John Bittner CTO [xaccellogoemail] 380 US

Hello all, Anyone know an easy way to have the Directory Application<https://wiki.asterisk.org/wiki/display/AST/Directory+Application> lookup all the voicemail contexts in the system. Like a global option John Bittner CTO [xaccellogoemail] 380 US Highway 46, Suite 500 Totowa, NJ 07512 Phone: 201.806.2602 x2405 Fax: 201.806.2604 Cell: 973.390.1090

Hello, Anyone see this issue, I have a conference bridge setup for a church with a Barix unit that streams audio into the bridge. The bridge is started by calling in to a number that executes a call file and the system calls the Barix unit starting the broadcast. Users then call in and can listen to the sermons live. The system works flawless with 1 issue I can't get accurate cdr's. Every

I don't know if there is some fault in compiling or a bug of the new R-1.7.0 version: cl.pam.2 <- pam(as.dist(1-cor(mel.data)),2) plot(cl.pam.2) perform a right partitioning and silhouette plot on the old R-1.6.2 instead "Error in clusplot.default(x$diss,...... ; x is not numeric" is the output on the new R-1.7.0. Same platform: RH8.0 i686. Some suggestions? A.S.

Anyone know how to get app_queue to send logs to MySQL or any other sql server. I found info for cdr's and even configs but nothing on queue_log. If sql is not supported in the current app_queue I will be willing to pay someone to add it. John Bittner Simlab.net

Hello all, i am new to shorewall and i already have a question ;) i am running a mailserver in my dmz (or actually this will be when = evertything will be working fine with shorewall) with public ip = addresses.. i have a subnet of 8 ip addresses (255.255.255.248 mask) and = i was planning of the classic 3 nic (eth0-2) setup... the dmz should = work with proxy-arping...=20 now my quesion is

This is a minor release of Shorewall which rolls up a number of bug fixes. New features include: 1. A NEWNOTSYN option has been added to shorewall.conf. This option determines whether Shorewall accepts TCP packets which are not part of an established connection and that are not ''SYN'' packets (SYN flag on and ACK flag off). 2. The need for the

Anyone get the Nortel 1140E phones working with Asterisk ? These look like great phones and I would like to start using them on our deployments. I know these will work with Asterisk but the sample config files are hard to find. My next step, if I cant find anything on this list is to purchase a Nortel Communication Server for testing. If anyone has a used NCS that works with these phone via SIP

I've checked to web for the format of the .spx file, and have not found anything complete. I've attached what I have deciphered so far. There are a few question marks in my tables that I want to understand better. I've also attached the .spx file that I used in the example values. I'm trying to take Speex-encoded data from an embedded microprocessor and put it into the .spx