similar to: New Install for 6to4 tunnel

Hello list! So I recently reconfigured our office network to allow a permanent VPN connection to our data center. This consists of a Juniper SSG-520 connected via a tunnel to a Juniper Netscreen-25 over a 100M leased NTT VPN (yes I'm tunneling over the VPN as it's the only way to make it routable.) Here is where OpenSSH come in. When I try and ssh to a machine on the other end

Hello, Looking here http://www.ipsec-howto.org/x299.html I''ve set up a vpn in transport mode with two linux boxes. I''m now trying to set it up in tunnel mode. After using the example keys, trying to ping, it doesn''t work because the route network isn''t routable. This mention is in the howto "If you tunnel is not working, please check your routing.

Could someone provide some help tunnelling a connection through a ssh pipe using putty on a windows 98 client to a samba server? I think I am doing it correctly but can't map a samba share and can't figure out how to debug it I can't find any log files or any other way to determine how the connection attempt is proceeding Any tips?

><snip> > >> Yes .. it should be on mirror.centos.org now .. you could change the > >> repo where your updates come from.? OR .. wait for that mirror to get > >> updated. > > > > > > I just did > > yum clean all > > yum update > > > > and 15-8 showed up.? Maybe the 'clean all' > did it, or maybe just

Folks I am trying to install Centos 8.1 on a MacBook Pro. I have a bootable USB stick with centos-8.1-boot (which I think is the equivalent of a netinstall), and it boots. However, when I select the storage option, and choose to make more space on the SSD, go through the confirming dialogs, the installer complains that it was unable to save the information to the disk. A similar attempt

<snip> This it is a very easy process to create an installable usb key: 1. Download the iso file from a mirror. 2. Check the sha256sum with this from the command line: sha256sum <isoname> 3. verify the output is the same as this list (for CentOS-6.7): http://mirror.centos.org/centos-6/6.7/isos/x86_64/sha256sum.txt.asc 4. Find the name of your USB stick, from the command line

I've been trying to implement the quota system for a Linux cluster. I'm trying it out on a mini-cluster of 4 CentOS 6.3 VMs. I've named them: lion-login lion-sn1 lion-cn01 lion-cn02 All nodes are on the virtual subnet 192.168.56.0/24. lion-sn1 (storage node 1) is the NFS server and the other three nodes are the NFS clients. /etc/exports on lion-sn1: /home 192.168.56.0/24(rw)

On Sat, Mar 5, 2016 at 11:48 AM, g <geleem at bellsouth.net> wrote: > > > On 03/05/16 09:04, Chris Murphy wrote: >> You don't say how you created the media. >> > -- > > true, i did not say how i created cd's. > > i used k3b as it is easier, less to remember, than using command line. OK. > usb's sticks were created using unetbootin and

Hello, I have given myself quite the headache trying to make this VPN work correctly. I am attempting to use racoon to establish keys and construct an encrypted tunnel between one host(A.A.A.A) with a routable IP address and another that has a private address(10.0.0.2) with a cable modem(B.B.B.B) forwarding all ports to the private address(10.0.0.2). Here is a quick topographic dipiction of the

Hi, I have a question. I have a routeable /24 netblock including a server at a colocation and I would like to use tincd to tunnel part of that netblock to an internal network on another location being connected to the internet via gateway with DSL link and a single static IP address, so I can use public routable IP addresses on the local network. I have tincd 1.0 pre7 installed on both the local

> > >On Thursday 15 November 2012 18:36:16 david wrote: > > Folks > > > > Just for laughs, I tried installing Centos 6.3 on the laptop HP > > 8540w. Windows 7 installed earlier, but I had to import a driver for > > the Ethernet controller since it was not supported on the > > distribution DVD of Windows7. > > > > The Centos installation I

I'm completely confused here and I'm hoping someone here has a setup they're willing to share, or help me configure things on my end. My connectivity is through Comcast, who unfortunately, does not offer ipv6 in my area. My connection goes like this: Comcast -> Motorola Surfboard Cable Router -> CentOS 6.5 server The CentOS server is multi-homed and manages the internal

On Sun, 2 Aug 2020 at 10:20, david <david at daku.org> wrote: > > > ><snip> > > > > > > >> Yes .. it should be on mirror.centos.org now .. you could change the > > >> repo where your updates come from.? OR .. wait for that mirror to get > > >> updated. > > > > > > > > > I just did > > > yum

Hi, I have successfully setup a tinc vpn between two machines, which is great, and now need do the same to a machine behind a firewall (I do not control the firewall, alas). The firewall will allow port 80 out (via an http proxy), so I wish to use GNU http-tunnel (or similar) to tunnel through the firewall. I have also successfully used http-tunnel to tunnel a simple ppp over ssh connection.

Hello. I wonder how just correct couple of spdadd commands like spdadd 192.168.1.0/24 192.168.2.0/24 any -P out ipsec esp/tunnel/10.1.0.1-10.2.0.1/require; spdadd 192.168.2.0/24 192.168.1.0/24 any -P in ipsec esp/tunnel/10.2.0.1-10.1.0.1/require; makes _routing_ of packets from 192.168.1/24 into 192.168.2/24. If I understand correctly how it works on *BSD, these commands with make already

I've got three installations of FreeBSD using 6to4 in three different physical locations, attached to three different ISPs. Sometime in the last few days all of them have stopped talking to IPv6 addesse which are not also 6to4. I can still talk to 2002: addresses, but not to 2001: addresses. This all worked fine a few days ago, and nothing has changed in the config of any of these machines. I

When using VPN tunnelling (-w option), is there a way to know when the tunnel is actually up? I want to use this in a script that automatically sets up the tunnel by running ssh -w then running ifup [1]. The -f option doesn't help because it returns after connecting to the server but before the tunnel is up. Sleeping for a few seconds does work, but it just feels too hacky. The LocalCommand

I am installing my first xen system (CentOS 5.3). The host system seems to be ok. I am following this tutorial: http://www.howtoforge.com/installing-xen-on-centos-5.2-i386-p2 Now I try to use virt-install to install the first guest system, but I cannot find a working install source. I have tried at least these: http://ftp.funet.fi/pub/mirrors/centos.org/5.3/isos/i386/

At 07:57 AM 8/2/2020, you wrote: >On Sun, 2 Aug 2020 at 10:20, david <david at daku.org> wrote: > > > > > > ><snip> > > > > > > > > > > > >> Yes .. it should be on mirror.centos.org now .. you could change the > > > >> repo where your updates come from.?? OR > .. wait for that mirror to get > >

I hope this list is still active. I''m an experienced Linux Sysadmin, but I haven''t done much in the way of routing. Due to a decision made by my higherups, I need to jam a computer between my ISP and my LAN to do bandwidth throttling. My current setup: 1 Crappy Cable Modem (7Mb/768Kb connection) with a static IP. 4 servers (all have static, routable IPs) - One of which is