similar to: FreeBSD 9.2 ahci under Parallels VM

On 26 May 2014, at 23:26, Charles Lepple <clepple at gmail.com> wrote: > On May 26, 2014, at 4:05 AM, "Daniel O'Connor" <doconnor at gsoft.com.au> wrote: > >> I've looked in upsc, upsrw and upscmd but none seem to have a suitable option. > > Is there a "battery.test" command, or similar? There are these commands.. test.battery.start.deep

Hi, I was experimenting with Logstash + elasticsearch on FreeBSD 9 - initially I downloaded it by hand (I forgot to check for a port) and it worked fine. I then tried the port and this forced me to use a different java version (was jdk-16.0.3p4_25 now openjdk6-b27) and it seems that the new one causes a panic. Unfortunately crashdumps aren't working properly, however I did get the panic

Hi, We have been testing an MGE Pulsar M 3000 and found that the lowbatt doesn't appear to do much. You can see it in the output of upsc but battery.charge.low is still the default. Setting battery.charge.low with upsrw does seem to 'stick' though so I we can use that. Mostly I'm wondering what the driver param is for :) -- Daniel O'Connor software and network engineer

Hi, I'm trying to get a system with an Intel G33 video chipset in it (Supermicro C2SBA) working with the Intel driver but I'm not having much luck.. I took the patch from Hiroshi Nishida and added the G33 PCI ID's for it now I get agp/i810 attaching to it.. Matched G33 Matched for Intel G33 IG SVGA controller Matched G33 Matched for Intel G33 IG SVGA controller agp0: <Intel G33 IG

I have an amd64 7.1 install on a SuperMicro C2SBA+ and I see the following in dmesg.. sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not

Hi, I have a FreeBSD 9.2 system with NUT 2.6.5 (installed via the ports tree) with an MGE Pulsar 1500 connected. A while ago it complained it needed the battery replaced and it was finally replaced last week, however I can't find out how to reset the flag in NUT. I've looked in upsc, upsrw and upscmd but none seem to have a suitable option. The UPS is connected via RS232 and upsc output

I'm currently re-installing db41 port. Earlier using 'innodb_force_recovery = 6' seemed to fix that PANIC error. But I don't understand this permission error. I've tried various permissions as well 777, 766, 666, 760, etc etc. I've also ran mysqld_safe as root user, but with same permission error. Also tried different directories without luck. When I log in to the

We have several systems in remote locations and I have found that the ones in the US are having issues.. We are an Australian company and can't source a 110V UPS locally so we arrange to have one bought for the site when it's installed. It seems that in the US we are getting "Pulsar EX 1500" UPSs but locally we buy "Pulsar 1500". NUT seems to work find with the

Hi all, Does anyone have a working password syncing setup (where changing the password in Windows will change the unix password) with Samba 3.6? Thanks. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766

Hi, I saw your email here http://lists.alioth.debian.org/pipermail/nut-upsdev/2005-October/000243.html about the Liebert UPS protocol and I was wondering if it actually got in the NUT tree? I had a look in the 2.2.2 tree but I can only find the closed contact stuff :( -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing

On 28 May 2014, at 10:54, Charles Lepple <clepple at gmail.com> wrote: > On May 26, 2014, at 8:21 PM, Daniel O'Connor wrote: > >> However if I do either of the tests upscmd just reports 'OK' and nothing happens. > > Anything in syslog? Not that I can see :( What would log it? I could try running the driver with debugging and see if that shows anything of

On 28 May 2014, at 21:59, Charles Lepple <clepple at gmail.com> wrote: >> What would log it? > > The driver. OK. >> I could try running the driver with debugging and see if that shows anything of interest. > > That should help. Unfortunately for non-debug operation, it appears that most of the usbhid-ups instcmd messages are buried at debug level 3 or 5. That

Hi, I tried updating Samba to 3.4 (from 3.3) as libsmbclient uses it and that pulls in talloc which conflicts with 3.3.. Unfortunately when I tried it, it hung when I tried to use the ldap passdb backend. I could not really get any useful debugging out of it :( The stack trace is junk (even after enabling max debug) and running with.. sudo /usr/local/sbin/smbd -d 10 -F -S Showed stuff but

Hi everyone, I'm having an odd issue with a Samba install - it starts SIGABORTing complaining that gencache.tdb has gone missing.. ie [2007/08/09 12:52:50, 0] lib/util_tdb.c:tdb_log(662) tdb(/var/db/samba/gencache.tdb): tdb_reopen: open failed (No such file or directory) [2007/08/09 12:52:50, 0] smbd/server.c:open_sockets_smbd(572) tdb_reopen_all failed. If I recreate it and restart

Hi everyone, We just got an MGE Comet EX 11 RT with extra battery (all 250kg of it..) and I have talked to it with NUT. One thing I see is the frequency.. input.frequency: 500 output.frequency: 500 It appears to be in tenths of a Hz vs Hz as I see on a Pulsar Extreme. I'm using NUT 2.0.3 on FreeBSD 6.1 Thanks. -- Daniel O'Connor software and network engineer for Genesis Software -

Hi, I have a system which monitors 2 UPSs, and it runs upslog twice. I had a problem with newsyslog rotating the log file because upslog keeps it open (arguably a bug IMO), but it also has no way of changing the PID file so newsyslog can't HUP it when log rotating. Attached is a patch which allows you to specify the argument for writepid() so you can differentiate them easily. -- Daniel

Hi, I have an Eaton/MGE EX 11 RT UPS (uses the mge-shut driver) and while I was testing it I found that it would turn back on straight after power was restored. I had a look but I couldn't find a setting which would let me tell it to charge to (say) 50% before turning the load back on. Does anyone know if this is possible? A setting like this would provide some hysteresis for successive

Hi, In April 2009 you posted on the syslinux list trying to get FreeBSD booting from it. Did you succeed? I didn't see a reply confirming it. Also, what version of FreeBSD were you using? Thanks. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." --

Hi, I have a FreeBSD 9.2 system running Samaba 3.6.12 and I am trying to setup password syncing so Windows users can change their passwords and have that change reflected in the FreeBSD password DB. I added the following to my smb.conf unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat timeout = 10 However, when I change a password in Windows it

Hi, I have been experimenting with Samba 4 on FreeBSD 9 and after a lot of googling the core stuff is working (phew). However I have a few problems, I am trying to setup roaming profiles and the tutorials suggest creating the share and then using a windows client to set the ACLs on it, however to do that the user needs the SeDiskOperatorPrivilege priv, so I [midget 23:38] ~ >net rpc rights