similar to: Problem with Dovecot after upgrade to Debian 7.0 (stable)

Hi, I'm trying to connect Asterisk 1.4 and Cisco CallManager 5 using SIP Trunk without MTP (media termination point). Howerver, Cisco 79xx phones do not support RFC2833, they always notify CCM5 via SKINNY channel no matter where they send RTP to. For non-MTP trunk there's Out-of-band DTMF support in CCM5 called "kpml". I wonder if Asterisk can support it. I found an

Dear all, Do you have come acrross with this issue. My ss7 link get fluctuating. It use chan_ss7 version 1.0.95-beta. I have 8 E1s running on a DL380 server. This enable to have calls from sip to ss7 and vice versa. However ss7 links are not stable. linkset siuc, link l1, schannel 1, sls 0, NOT_ALIGNED, rx: 1, tx: 2/4, sentseq/lastack: 127/127, total 4034145216, 4031118560 linkset siuc, link

Hi, It looks like KDE's file manager Dolphin doesn't support MTP under CentOS 7. When I plug in an MTP device like my Nikon camera or an Android phone, Digikam shows its content OK, but Dolphin seems to ignore it. For now, my custom CentOS 7 + KDE desktop meets about 99 % of my needs. Now I've decided to tackle the remaining 1 %. Yesterday for example, I managed to correct the

Dear all, Do you have come acrross with this issue. My ss7 link get fluctuating. It use chan_ss7 version 1.0.95-beta. I have 8 E1s running on a DL380 server with Digium E1 cards ( 4 port cards). This enable to have calls from sip to ss7 and vice versa. However ss7 links are not stable. linkset siuc, link l1, schannel 1, sls 0, NOT_ALIGNED, rx: 1, tx: 2/4, sentseq/lastack: 127/127, total

I received some large data sets in Minitab Portable Worksheet (.mtp) format and wanted to read them into R. Here is a _first cut_ at a perl script that transforms .mtp files into something that can be read by R. Comments, bug-fixes, enhancements and extensions are welcome. #!/usr/bin/perl # Convert a Minitab Portable Worksheet to an R (or S-PLUS) list structure # $Id: mtp2R.pl,v 1.1 1998/01/16

Charles, > What is the new behavior? The CentOS minimal install had different print statements and a broadcast message whenever the UPS was disconnected. The broadcast isn't really important. Below are the differences I pasted though I'm not sure if they are important, I just noticed they were different. Particularly the bolded parts which I think you alluded to in your email about

On Sep 22, 2014, at 11:14 AM, Shade Alabsa <shade34321 at gmail.com> wrote: > These machines are exact replicas of each other and are fairly old and have a Core 2 Duo E8400 CPU in them. Is there anything else you need or anything I can do to help fix this? Thanks! Also, Barry Skrypnyk mentioned that Fedora was one of the Linux distributions that Tripp Lite claims to support. I recommend

I'm trying to copy file from my samsung flip phone. google has informed me of libmtp and gvfs, but it doesn't seem to be helping. [root at localhost yum.repos.d]# mtp-detect libmtp version: 1.0.1 Listing raw device(s) No raw devices found. [root at localhost yum.repos.d]# In case it helps, I did a diff of ls -R from /dev before and after USB connection: [hennebry at localhost dev]$

On Fri, 17 Feb 2017, Joseph L. Casale wrote: >> [root at localhost yum.repos.d]# mtp-detect >> libmtp version: 1.0.1 >> >> Listing raw device(s) >> No raw devices found. > > Does your phone have a usb setting for phone versus mtp mode? I think it doesn't. >From dmesg: usb 2-2.4: USB disconnect, device number 10 usb 2-2.4: new full speed USB device

Hello, just joined to the list, because i have a problem. :S We have 2 exact same configuration: basic Fujitsu server + Eaton NV1000H ups. OS is Debian Squeeze. According to the driver list, the ups uses the blazer_usb driver. I never tried nut before, so i read some of the docs, and configured it manually. The problem pops up when i try to simulate the power-outage. I just unplug the ups'

Hi, I'm setting up NUT on a raspberry pi 4, following the guide here: https://melgrubb.com/2016/12/11/rphs-v2-ups/ OS version: Raspian Buster NUT version: 2.7.4.8 Installed via: apt package install Device: Legrand Keor Multiplug connected via USB The problem I am experiencing is that *NOTIFYCMD* never runs. I can connect to the device via *upsc*, and I receive WALL messages when I connect

So, I got my wife a Nook for her b'day. I just plugged it into my system, CentOS 6.5, and what I see is /media/NOOK, and it shows 257k or so - yes, k, not m or g. It's *not* seeing any directories, etc, and the small thing I'm guessing is firmware, since even when I try mount -o remount -rw, it is still r/o. Googling, I see mentions of fsmtp, I think it was, and yum shows some mtp

I have a server with an asterisk ss7 link connected to a Siemens working well for over a year. A few days ago I started having problems with signaling. I found the following logs in / var / log / messages Sep 12 11:49:25 call3 kernel: [1018427.030959] dahdi: Master changed to TE2/0/2 Sep 12 11:49:25 call3 kernel: [1018427.120740] dahdi: Master changed to TE2/0/1 Sep 12 11:49:26 call3 kernel:

>I just went through the same issue. Take a look at my thread. >Double check that upsmon.conf:NOTIFYCMD /sbin/upssched is not still commented. Thanks for the response, can you link to it? I'm not finding it in the search. I'm not using /sbin/upssched, I have NOTIFYCMD set up as: NOTIFYCMD /home/pi/Documents/scripts/ups-log.py and it's not commented out. On Tue, Feb 11, 2020

Hey, was wondering if I could get a quick sanity check. We have a SmartUPS 1500 RM2U which we have connected to a box via USB. It seems like every 40-45 seconds it becomes disconnected and reconnected. Though this only happens when we have NUT enabled, otherwise it's fine. When it is disconnecting and reconnecting running lsusb doesn't show it disconnecting. After having it sit like that

I have an old Canon Powershot A410 camera that used to just work with Centos 6. All I had to do was install Shotwell and forever after I could just plug that camera in and Shotwell would automatically load and all was well. I'm now trying to get that camera to work on Centos 7, but am having no success. Jul 20 16:01:44 jeff kernel: usb 2-1.3: new full-speed USB device number 4 using

Dear R gurus, I trying to convert a list of data frames to one data frame, but one of the values within the list is NULL, so I get the error "arguments imply differing number of rows." Do you know of a quick way to tell R to combine all that are not null? Here is a simple example: >

I just went through the same issue. Take a look at my thread. Double check that upsmon.conf:NOTIFYCMD /sbin/upssched is not still commented. On Tue, Feb 11, 2020 at 7:00 AM <nut-upsuser-request at alioth-lists.debian.net> wrote: > Send Nut-upsuser mailing list submissions to > nut-upsuser at alioth-lists.debian.net > > To subscribe or unsubscribe via the World Wide

> When you run that command, does "some text" appear in the system log? When I run Documents/scripts/ups-log.py manually I do see the expected text echo'ed to the command line. It actually appends to a Google Sheet, not the internal log files. When I would expect to see it triggered by NOTIFYCMD, I don't see any text printed and nothing shows up at the google sheets. If

NUT 2.8.01 When I pull the USB cable from the UPS, I get two notifications of the nocomm-timer expired. The first notification is in the proper sequence, the second notification occurs after 'commok' occurs. Seems somehow that upssched-cmd is getting a second nocomm-timer expired delayed. Dan -------------- next part -------------- An HTML attachment was scrubbed... URL: