similar to: Making available a subnet using a device behind nat router

about tomato firmware... can I install it on a VMware virtual machine? tinc web ui is already included with the last tomato version? king regards, Cristiano. 2015-06-08 16:52 GMT-03:00 Lance Fredrickson <lancethepants at gmail.com>: > On 6/8/2015 11:55 AM, Cristiano Albiero Berni wrote: > > 2- Is there a kind of web interface to manager the server? >> > Tinc itself

Hi, I have some questions about tinc. " *Automatic full mesh routing*Regardless of how you set up the tinc daemons to connect to each other, VPN traffic is always (if possible) sent directly to the destination, without going through intermediate hops. " 1- To have client to client direct connection and don't have traffic through the server should I have port forward at the NAT? Or

I am running tinc v. 1.1pre (truly as I read somewhere, ?one of the internet?s best kept secrets?) on some consumer home routers flashed with tomato firmware. I have a whole network of these, but for the purposes of this question I will focus on just three Router A (subnet 192.168.5.0/24) is connected via a standard tinc ?router? mode network with Router B (subnet 192.168.15.0/24). Router B, in

Dear all, I have 3 nodes: A, B and C. C has external IP and A and B are behind NAT. It turns out A and B route their traffic via the C, which they ConnectTo with; this instead of getting connection details from one another and contacting eachother directly (mesh style). The reason is, as I conclude from tincd debug output, is that they see the peer as having a minimum MTU of 0. I suspect this is

> On Jun 4, 2015, at 5:52 PM, Etienne Dechamps <etienne at edechamps.fr> wrote: > > Are you sure B is correctly configured to forward packets at the layer > 3 level between the interface of the "router" tinc and the interface > of the "switch" tinc? (iptables, etc.) > No, I am not sure about this and I think this is what I don?t understand properly

Dear Lance, It is not work. Any idea? Regards, Eric -----Original Message----- From: Lance Fredrickson [mailto:lancethepants at gmail.com] Sent: Wednesday, February 17, 2016 12:53 AM To: tinc at tinc-vpn.org Subject: Re: Tinc Router Mode - PING RESULT is destination host unreachable On 2/16/2016 9:04 AM, Eric Yau wrote: > Hi Lars, > > Once I modify the firewall FORWARD rule to

I've been running Tinc on my routers for several years. I thought I'd do an integration of tinc with gui in Tomato firmware because I find it useful. It's been working well for me, but I'm sure there's there's a bug or two, or something I've overlooked. Let me know of anything and I'll correct it in a future release. I created a tutorial for Tomato users here.

Greetings. I'm new to tinc, but have so far managed to get a couple laptops and a hosted server all connected. They're working as expected, running Tinc 1.1-pre11, which I compiled from source. Next I want to move on to adding my home router into the mix. My routers run OpenWRT. I don't have experience compiling anything from source for OpenWRT, but OpenWRT has Tinc 1.0.25

On 6/8/2015 4:09 PM, Cristiano Albiero Berni wrote: > about tomato firmware... can I install it on a VMware virtual machine? No, there isn't really a way to get it working well in emulation. > tinc web ui is already included with the last tomato version? Shibby has included it for several releases. Ironically it's not in his 'vpn' release. It's currently only in the

We have a handful of nodes set up. Some are NAT'd but a few have direct access to the Internet. Sample confs: HostA: Name = HostA AddressFamily = any Interface = tap0 Mode = switch Connectto = HostB GraphDumpFile = /tmp/mesh HostB: Name = HostB AddressFamily = any Interface = tap0 Mode = switch Connectto = HostA GraphDumpFile = /tmp/mesh And so on. If I use HostA as the main meta sever.

Recently the small business I work at replaced an aging linksys wrt style router with a SonicWall one. Ever since this change I have issues with this node falling back to TCP constantly. TCP for me ends up performing very sub-par, and most of the time unworkable. For some reason too the connection usually ends up being routed through another node. I created a new tinc instance using TAP

Hello everyone. First of all, i congratulate tinc and its community for such reliable tool it is. I am working on a community wireless project where we have an isolated mesh network that we want to link by VPN. In order to fulfill this requirement we setup a tinc VPN, with two "nodes", servera and serverb. Servera has ip 10.0.0.1/24 and serverb has 10.0.0.2/24, and a spare network

I have some tinc nodes behind a nat router. Which ipaddress should i use in de host file for the tinc nodes behind a nat router. The internet ipaddress or the private ipaddress ? Perry

Hello, Please excuse my (probably newbie) question, but: Since RouterOS, MikroTik's proprietary OS, is largely based on GNU/Linux, anyone knows a way to run tinc on a MikroTik device? This would be in order to make an (imposed, no choice given...) MikroTik device (say the B1100AHX4 router) to participate in a tinc mesh, in interoperation with GNU/Linux machines. Please see:

Hello! I'm trying to make a wireless mesh network with b.a.t.m.a.n. protocol, and I would like to secure the wireless links with tinc. My test network is 2 wireless routers with OpenWRT Kamikaze firmware, and the network topology is the following: |CLIENT|eth0: 192.168.180| <--> |eth0: 192.168.1.1|MESH-NODE|ath0: 192.168.5.54| <~~> |ath0: 192.168.5.51|GW|eth1: 192.168.1.51|

Hi, I have successfully setup a tinc network between five hosts (in switch mode). Two of the hosts have static and known IP addresses (S1 and S2). Other hosts (H3-H5) connect one (or both) of them. The traffic flows nicely between all hosts. The initial edges (ConnectTo configuration directives) in my test network are: S1<->S2 H3 -> S1 and S2 H4 -> S1 H5 -> S2 As far as I have

Hi , I've added one node to my tinc mesh , with forwarding off , and the network got splitted into several pieces !!, the thing is that , the node with forwarding off is connected to all hosts , directly with connect to , and seems like that for some nodes the shortest path , that the tinc network can find is through the node with forwarding off , here are the results of my first ping to all

Yes, slides will be available afterwards. Additionally, a very similar talk will be presented at SCALE this year as well. Do you have any more info about how tinc is used by NYC mesh? Ben On Sun, Nov 15, 2015 at 3:55 PM, Daniel J. Grinkevich < danielgrinkevich at gmail.com> wrote: > Will the slides be posted after the talk? > > We use tinc for NYC Mesh to connect nodes that do

Hi all, I'm using a tinc 1.0.19 (from Debian Squeeze) setup with some nodes connecting to a "server" node which has "StrictSubnets = yes". Whenever a new node is added to the mesh, a process generates and drops its host file in the server's host directory before the node is booted and tries to connect. For instance, I create a node "node_2" and a host file

Hi everyone , i have a few questions/problems with tinc , which i need to address ASAP , so i'll make it brief . i have 33 sites , connected with each other using wan , in each site , there are two linux firewalls + 3-4 more servers , i preferred to have a full mesh within my network , but unfortunately it was not possible , when i wanted every site to be connected to every other , as the