similar to: Recovering btrfs fs after "failed to read chunk root"

I installed a fresh copy of Debian 4.0 and Xen 3.1.0 SMP PAE from the binaries. I had a few issues getting fully virtualized guests up and running, but finally managed to figure everything out. Now I''m having a problem with paravirtualized guests and hoping that someone can help. My domU config: # # Configuration file for the Xen instance dev.umucaoki.org, created # by xen-tools

Hi guys, sorry if this is trivial, but I have been googling a couple days and already compromised a test disk trying to figure this out, so I thought it is time to ask for some advice. I have a disk that comes from a clean and working CentOS4.2 install, and I am trying to use an external usb to ide converter to mount it on another workstation with CentOS4.2. I am trying this to better

Hi, i'm trying to create an ubuntu live-pendrive using this tutorial http://www.pendrivelinux.com/2007/02/12/usb-ubuntu-tutorial-for-linux-users/ I have a 2GB USB Pendrive. When I insert the pendrive, /var/log/messages says: kernel: usb 5-5: new high speed USB device using ehci_hcd and address 35 kernel: usb 5-5: configuration #1 chosen from 1 choice kernel: scsi13 : SCSI emulation for USB

On 04/22/16 08:19, Leon Fauster wrote: <<>> > check it with: > > blockdev --getalignoff /dev/sd > > (if a '0' is returned, the partition is aligned) > ===> Leon, thank you for reply. ]$ sudo blockdev --getalignoff /dev/sdc1 0 ]$ sudo blockdev --getalignoff /dev/sdc2 0 ]$ sudo blockdev --getalignoff /dev/sdc5 2560 ]$ sudo blockdev --report /dev/sdc1 RO

On 04/22/2016 09:43 AM, g wrote: > ]$ sudo blockdev --getalignoff /dev/sdc1 > 0 > ]$ sudo blockdev --getalignoff /dev/sdc2 > 0 > ]$ sudo blockdev --getalignoff /dev/sdc5 > 2560 > ]$ sudo blockdev --report /dev/sdc1 > RO RA SSZ BSZ StartSec Size Device > rw 256 512 4096 2048 838860800 /dev/sdc1 > ]$ sudo blockdev --report

I decided the most secure way to deal with backup/firewall issues between my work and home was to encrypt a portable hard drive and make it my backup. Lug it back and forth and sync as appropriate. So I wrote myself a little rsync script which grabs all the files I think of as taking work to recreate. Which is given as follows: rsync -avl --stats --progress --timeout=300 --exclude-from

Hi, I see some strange and dangerous things happening on a HPE server with HPE Smart Array controller where EL9 ends up with wrong device nodes/symlinks to the attached disks/raid volumes: (I didn't touch anything here but at 08:09 some symlinks were changed) /dev/disk/by-id/: lrwxrwxrwx 1 root root 9 Mar 1 07:57 scsi-0HP_LOGICAL_VOLUME_00000000 -> ../../sdc lrwxrwxrwx 1 root root 10

Hello guys! I tried to shrink a partition when resizing an image using virt-resize. The numbers and result are weird. ================BEFORE================ ><fs> blockdev-getsize64 /dev/sdc 4294967296 ><fs> part-list /dev/sdc [0] = { part_num: 1 part_start: 65536 part_end: 2193555455 part_size: 2193489920 } [1] = { part_num: 2 part_start: 2193555456

In article <20190225050144.GA5984 at button.barrett.com.au>, Jobst Schmalenbach <jobst at barrett.com.au> wrote: > Hi. > > CENTOS 7.6.1810, fresh install - use this as a base to create/upgrade new/old machines. > > I was trying to setup two disks as a RAID1 array, using these lines > > mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdb1

I want to install Centos Stream on an older server. the Areca ARC-1680 RAID Controller is not supported anymore, so I tried to install on an external USB drive. i did a manual partitioning: sdc1 /boot/efi efi system partition sdc2 /boot ext4 sdc3 / lvm and the system cannot boot - hangs forever. new try: sdc1 /boot/efi, efi system partition sdc2 / xfs at end of

I have inherited a system set up with multipath, which is not something I have seen before so I could use some advice The system is a Dell R420 with 2 LSI SAS2008 HBAs, 4 internal disks, and a MD3200 storage array attached via SAS cables. Oh and CentOS 6 lsblk shows the following: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdd 8:48 0 931.5G 0 disk ??sdd1

Hi Niki, md127 apparently only uses 81.95GB per disk. Maybe one of the partitions has the wrong size. What's the output of lsblk? Regards Michael ----- Urspr?ngliche Mail ----- Von: "Niki Kovacs" <info at microlinux.fr> An: "CentOS mailing list" <CentOS at centos.org> Gesendet: Mittwoch, 18. Februar 2015 08:09:13 Betreff: [CentOS] CentOS 7: software RAID 5

Hi, I recently installed centos for the first time and I like it! Also, I just started working with lvm. The following warnings are genertated whenever I run one of lvm commands on the external usb disk (MyBook by Western Digital). * What could be the source for those messages? * Should I worry about them (writing into the created LV's seems to work)? * If yes, how to fix them? [root

Hi, I have been attempting to set up a multi-boot USB stick (i.e. multiple bootable ISO images on the one stick) I have had good success by: - processing ISO with isohybrid (with "partok" flag) - dd'ing ISO to primary partitions on the USB stick (e.g /dev/sdc2, /dev/sdc3, /dev/sdc4) - installing grub to USB stick and configuring to chainload to these partitions To remove the limit

Hi, I just replaced Slackware64 14.1 running on my office's HP Proliant Microserver with a fresh installation of CentOS 7. The server has 4 x 250 GB disks. Every disk is configured like this : * 200 MB /dev/sdX1 for /boot * 4 GB /dev/sdX2 for swap * 248 GB /dev/sdX3 for / There are supposed to be no spare devices. /boot and swap are all supposed to be assembled in RAID level 1 across

greetings. centos 6.7 [current] 'disk utility' has started showing message; WARNING: The partition is misaligned by 2560 bytes. This may result in very poor performance. Repartitioning is suggested. for sdc5 - /home partition. /dev/sdc5 302243312 156348604 130534968 55% /home /dev/sdc7 80854912 57088 76683952 1% /hdd/c/07 other than time involved to backup

My previous question: "can syslinux on a USBstik also boot installations on other USB devices ?" got no proper reply, so I'm now including more background detail. The new problem is that my 32bit partition of ETHOberon, only gives a proper font-size under Debian7:DVDinstaller:rescueMode, since I'm forced to use a laptop, after my previous systems were stolen. Neither gnome nor

I have a system running CentOS 6.3, with a SCSI attached RAID: http://www.raidweb.com/index.php/2012-10-24-12-40-09/janus-ii-scsi/2012-10-24-12-40-59.html For disaster recovery purposes, I want to build up a spare system which could take the place of the server hosting the RAID above. But here's what I see: # fdisk -l /dev/sdc WARNING: GPT (GUID Partition Table) detected on

I've attempted to understand what the isohybrid tool is doing, specifically with the "--partok" flag. As far as I can see, this essentially trims off the first 3 bytes of the custom isohybrid MBR image before applying it to the ISO. Can anyone explain how this enables the ISO to "be happy" on a partition, rather than whole disk? And does anyone have suggestions for what

Thanks for the clarification Thomas. Thomas Schmitt wrote: > (Did you already tell which partitions exist and in which one do you want > to put your ISO ?) I've tried a number of different structures, but the results are consistent (boots fine from primary partitions, not from logical partitions). For example for a disk partitioned like below: Disk /dev/sdc: 3.8 GiB, 4007657472