similar to: Packetfence

Hi, I want to configure QoS in my shorewall conf but I have a doubt. Now I am using tcrules with prerouting and with the file providers, like this. 2:P 192.168.0.11 0.0.0.0/0 tcp 25 So, with this way I route my smtp traffic with my provider number 2. Well, now I want to configure QoS with tcclasses and tcdevices, but if I do that I need to use the MARK in the tcclasses So, how

Hi, In log I get: ----------------------------------------------------------- Sep 30 16:19:03 host kernel: Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth0 SRC=ip1 DST=ip2 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=27279 DF PROTO=TCP SPT=51501 DPT=25 WINDOW=8192 RES=0x00 SYN URGP=0 ---------------------------------------------------------- Even in /etc/shorewall/rules I have

I give up and need help! I won''t add to the confusion by showing all the combinations I have tried unsuccessfully... and yes, I''ve read FAQ2 and FAQ2a many times! When googling the subject of this post there are many answers that boil down to using the same three iptables rules, two of which use nat. I won''t repeat them here. I don''t want to risk mixing

Hi Tom and all, I started to play a bit with the AutoBL action on a CentOS 6 box and ran into the following problems: 1) The action.AutoBL doesn''t work for me until I patch it like so: --- /usr/share/shorewall/action.AutoBL.orig 2013-10-01 00:59:42.000000000 +0200 +++ /usr/share/shorewall/action.AutoBL 2013-10-07 14:44:31.530841099 +0200 @@ -22,6 +22,9 @@ DEFAULTS

I''m trying to use my VPS server (single interface of course) as somewhat of a VPN gateway to my other location (which is not accessible directly from some places) where the openvpn server is running, and am kind of lost as to what to try next. I tried a redirect rule, but apparently shorewall didn''t like that (it just failed to start). I tried adding the rules via

hi, while stopping shorewall 4.5.21.2 on a debian7 box with the ADMINISABSENTMINDED set to no in shorewall.conf, the connections on vlan tagged interfaces that were active before the shorewall stop command was executed are not terminated as it is for the firewall and other interfaces! when the firewall is stopped as expected new connections on vlan tagged interface are refused but even

Hello, I''m using shorewall-4.5.16 with centos5. The dhclient stores the lease information on the /var/lib/dhclient/dhclient-<DEVICE>.leases file. The /var/lib/shorewall/firewall script has the function detect_dynamic_gateway that detects the gateway based on the leases file. The code in the function is: detect_dynamic_gateway() { # $1 = interface local interface

Hi all, I need an help to implement this kind of rules on shorewall: iptables --insert INPUT -p udp --dport 53 -m u32 --u32 "0x28&0xFFDFDFDF=0x055a5a47 && 0x2c&0xDFDFFFDF=0x53540343 && 0x30&0xDFDFFFFF=0x4f4d0000" -j DROP This kind of rules need to block a DNS Amplification Attack. I found this file

Hi I''m running on a debian box shorewall-4.5.17. My main gateway is a router running on openwrt and I want to use the shorewall-lite packet provided by openwrt. The openwrt''s provided shorewall-lite packet is 4.5.7. So my questions would be: 1: Do I need to make some modifications before installing shorewall-core-4.5.7/shorewall-4.5.7 on my debian box? 2: if I have both

I had to restart one of my routers tonight and since then shorewall on it has been dropping SIP packets coming in from one machine instead of forwarding them to the freebpx server. Shorewall:net2all:DROP:IN=eth0 OUT= MAC=<removed> SRC=<my home network external ip> DST=<server network external ip> LEN=575 TOS=0x00 PREC=0x20 TTL=78 ID=230 PROTO=UDP SPT=5061 DPT=5060

Good afternoon Tom, okay? See if you can help me ... I have some users that connect via Softphone (SIP) outside my network. I''ve done a DNAT rule correctly. When these users connect, they can hear, but the other side can not hear. My telephony server receives connections by an alias eth0: 4 which is the same IP output. See my rules file and my nat file: rules: DNAT net

Hi all. I can''t seem to get the h323 connection tracking configured correctly for Shorewall. I am using the Debian Shorewall 4.5.16.1 package. I am running a Debian 3.9 kernel like so: # uname -a Linux gw 3.9-1-amd64 #1 SMP Debian 3.9.8-1 x86_64 GNU/Linux My version of iptables is: # iptables -V iptables v1.4.20 If I add the following rule in the /etc/shorewall/tcrules file to

Hi, I use shorewall-4.5.4 + lsm-0.143 and it does not seem to work as expected... When all providers are up, everything seems fine. When one goes down, lsm says "link <provider> down event"... and it seems ok but we then experience some problems such as a few unreachable sites, DNS problems... If I remove the downed provider from all confs and restart, everything works again.

Hi, I have servers where shorewall6 won''t reject nor log: # cat /etc/shorewall6/zones fw firewall net ipv6 # cat /etc/shorewall6/interfaces net eth1 tcpflags (I also tried without "tcpflags", but no changes) # cat /etc/shorewall6/policy $FW all ACCEPT all all REJECT info # cat /etc/shorewall6/rules SECTION NEW (for testing, I removed all the rules) I am testing from

the establishment of an openvpn link sometimes fails. I tracked it down to network traffic with wrong Sourceport in the answer packet (should be 1300 not 1024): 2 1.119309000 aaa.185.165 bbb.162.192 UDP 58 Source port: 1300 Destination port: 1300 3 1.119446000 bbb.162.192 aaa.185.165 UDP 66 Source port: 1024 Destination port: 1300 and a collateral entry in the connection tracking table

Hi folks, I''m having an issue with rsync between my firewall and an internal box. It seems to be a shorewall issue (or correctly speaking, an issue with my shorewall config) because if I disable shorewall my rsync works fine. And I just can''t find it documented anywhere what I need to do. I have rules like this : root@userver:/etc/shorewall# grep -i Rsync rules

Hi, I have 2 Debian testing boxes running a very similar setup (both running the latest aptosid kernel); on one of them, since the iptables/libxtables10 packages have been upgraded from 1.4.19.1-1 to 1.4.20-2, shorewall-init can''t start shorewall anymore and for this reason ifupdown also fails triggering firewall up. Shorewall can be successfully started later on, and ifupdown starts

Hi to all For is just az concept question : There are a need to change something in Squid3 config when it are running in the same box as shorewall with 2 ISP ? I''ve been thinking in do this at home, as a proof of concept for future implememtations ... I allways use Roberto''s Debian package to implement Shorewall . Fábio Rabelo

When using shorewall with a road warrior openvpn setup, how can I get the tun interface to masq through a lan interface? Example Setup: Machine A (tun0 10.0.0.1) -----------VPN---------(tun0 10.0.0.2)---------Machine B(10.10.10.1) When I ping Machine B from Machine B, Machine B is receiving the echo request, but it doesn''t know the route back to the 10.0.0.0/24, and there

Hi, My main gateway is a router running on OpenWrt Barrier Breaker r37816/ Kernel Version3.10.4. I installed shorewall-lite from openwrt''s repo using opkg but while trying to start shorewall-lite I get the folowing errors: The first error i got was "scp: /var/lib/shorewall-lite: No such file or directory" simply resolved by making the folder "shorewall-lite"