similar to: Direct DAHDI documentation

Hi, > >... > >drivers/isdn/capi/kcapi.c:1014:47: error: macro "INIT_WORK" passed 3 > >arguments, but takes just 2 > >make[2]: *** [drivers/isdn/capi/kcapi.o] Error 1 > >make[1]: *** [drivers/isdn/capi] Error 2 > >make: *** [_module_drivers/isdn] Error 2 > >#+ LOG INFO: pwd:/usr/lib/eicon/divas/src > >#! LOG ABORT EXECUTION DUE TO

Hello, I want to use a 4 port ISDN card from EICON/DIALOGIC in our asterisk server. The system is a Ubuntu 7.10 with kernel 2.6.23.1. The compilation of the kernel finishes without any problems. I have downloaded and installed the deb-source package that EICON/DIALOGIC offers. Th installation script crashes with the following error messages: # LOG ---- START SECTION read kernel version

While R has library TSP to help solve traveling salesperson problems, does anyone know if it has any libraries to help solve multiple traveling salesperson problems? For instance, suppose one is planning school bus routes and one has multiple buses. Thank you for your time. -- View this message in context:

Hi All, I'm going to be upgrading our 1.2 Asterisk system. At the moment we use the Enicomms SLN files. Are there major differences in the 1.4 default voicefile packs, or will I be able to re-use Enicomms?? In the Make menuselect, I noticed theres no .SLN voicefile selection for the basic audiofiles - has SLN been depreciated? Thanks Adrian

Hello everyone, I'm using very simple setup to make and receive external ISDN calls through a softphone (x-lite version 3.0 - Win32) via an asterisk box. Hardware setup: - Dialogic Diva BRI (lspci yields: Network controller: Eicon Technology Corporation DIVA Server BRI-2M/-2F (rev 01)) - ISDN BRI line Software setup: - Redhat 9 - asterisk-1.4.16.2 - chan_capi-1.0.2 Asterisk configuration

I have installed an Asterisk 1.4 on Suse93 using a FritzCard. Some calls are logged to the ISDN log, but Asterisk is not detecting incoming calls. I wonder whether some other device or process is preventing Asterisk from gaining access to the isdn line? Is there some way to ensure that only Asterisk can listening to the line, or get it to share the line with some other device, such as the fax

Speaking as former Dialogic/Bayonne user who was frustrated for months with Dialogic's complexity and months of initial testing with GlobalCall only to use their many-years-old and very complex base Dialogic drivers(and eventually scrapping it all for Digium/Asterisk and being up one week later), I can tell you that Digium/Asterisk is definately the way to go. It is 1000 times easier to

I have installed an Asterisk 1.4 on Suse93 using a FritzCard. Some calls are logged to the ISDN log, but Asterisk is not detecting incoming calls. I wonder whether some other device or process is preventing Asterisk from gaining access to the isdn line? Is there some way to ensure that only Asterisk can listening to the line, or get it to share the line with some other device, such as the fax

Does anyone know if there's public voice detection algorithms available? I've scoured the net for the last hour or so, and I can't come up with anything except a few proprietary or embedded solutions. I know dsp.c uses goertzel algorithms for DTMF detection, but how does one detect voice? I dunno, maybe detecting voice isn't the way to go. I want to begin playback of a file

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:

> Hello fellow asterisk people! > > I have Asterisk listening on port 5061 and SER on port 5060. > > Asterisk is configured as a gateway for ISDN/Analog/H323 and also SIP. > > My problems are with SIP. I can make incoming calls from SIP to asterisk > and to any of the other networks, but when I try to make an outgoing call > from Asterisk to SER I see the following in

Hi, I tried to use Early Media: exten => 1,1,Playback(demo-thanks,noanswer) same => n,Hangup() But when calling my extension I do not hear the voicefile - I only hear the ring tone. In the Asterisk-Log I can see, that the voicefile is played. I got the same result when using "Progress()" in the first priority. I tried "pri set debug on span 1" and got the

Hi all, i have asterisk 1.0.9 with an Eicon Diva 4bri and chan_capi-cm-0.6. I have 2 NTBAs (one with did and one without). When using the one without did, i am able to place outgoing and incoming calls. When i use the NTBAs with did i have a layer 2 error. Anyone an idea? -- Executing Dial("SIP/2004-9634", "CAPI/g1/43XXXXXX") in new stack > data = g1/43XXXXXX

Hi; I've got an AAH installation where a customer wants to install an active Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at kernel 2.4.21.37. Support for Eicon active cards is built-in. I've debugged and run the A@H install-Eicondiva script but when I try to run divactrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter

Hello, I have installed an asterisk server with 7960 sip phones and an eicon card (diva 4bri server, I use only three channel) using capi channel. Everything seems to work fine, but from time to time (two or twice a day) during a call I get a capi error in asterisk log and asterisk doesn't work anymore: ==== Apr 1 10:38:24 ERROR[20495]: File chan_capi.c, Line 738 (capi_write): error

Hi All, I've a 1.4.15 A*k server supporting several users (approx 80 total, but <10 sim calls usually). I've one user who complains of intermittent bad calls, though I suspect the bad calls are across the board, but intermittent. Inbound calls are via in IAX trunk from Gradwell. CPU stats say that Asterisk never uses more than 4-5% cpu, systems idle besides that. Memory seems

Hey guys This is probably for Armin, but I thought maybe someone else might have something I could try. I'm having a problem with one of my Eicon Diva V-4BRI cards and I'm trying to work out if its a driver configuration error, card failure or telco problem: I have an Asterisk box running -- the Eicon drivers see all four ports on my card, capi.conf is configured with all four ports

Hello, I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux. In the modem.conf file i have put following: ----------- [interfaces] ; By default, incoming calls should come in on the "remote" context context=remote ; Modem Drivers to load driver=i4l ; Type of dialing

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg

Good Day list, Anyone know if there is a way to have the AgentCallBackLogin function play a voice file after the agent picks up the phone? If this is not an available feature, any ideas on the difficulty in making this feature? Example: Extensions.conf exten?=>?700,1,AgentCallbackLogin(${CALLERIDNUM}|?AnnounceCAllQue-TechSu pport?); ....... exten => s,6,Queue(queue1)