similar to: Only one CPU core detected on Supermicro E3-1240 v3

Hi people, pls does anybody know what "(T)" and "(D)" letter means? server3*CLI> iax2 show peers Name/Username Host Mask Port Status SERVER1 xxx.xxx.xxx.xxx (D) 255.255.255.255 9785 (T) OK (29 ms) SERVER2 xxx.xxx.xxx.xxx (D) 255.255.255.255 4569 OK (95 ms) 2 iax2 peers [2 online, 0 offline, 0

Hello, according to documentation: https://wiki.samba.org/index.php/Setting_up_a_Share_Using_Windows_ACLs User is required to setup the file share using ms windows (Computer Management->Connect to another computer). That I am trying without success. When I connect with Windows 7 client I get error message: "Event Viewer cannot connect to computer 'SAMDOM.EXAMPLE.COM. The error ported

Hi Marian, I took a brief look at RFC 5574 and as far as I understand, you can simply do it like this: SpeexBits b; speex_encode(state, some320bytePCM1, &b); speex_encode(state, some320bytePCM2, &b); After that, get the encoded data with speex_bits_write and put it in your packet. Mark -----Original Message----- From: speex-dev-bounces at xiph.org [mailto:speex-dev-bounces at

Hello all, I am experimenting with Speex in a mobile VoIP application, and it seems that it is worth stuffing more than one codec frame into a single RTP packet; mainly, that sending several frames per packet relieves the underlying network socket connection, which is notoriously problematic in mobile devices. RFC 5574 defines the exact way how to put multiple Speex frames into a single RTP

I checked my entire setup again and again. Now I can see the my share. The most relevant change I did (afaik - ofcourse): - since I am using ad backend I created dedicated unix admin groups (as recommended in the docs) - I removed the $ from the share section/defnition ([projects$] -> [projects]) - I changed browseable switch from 'no' to 'yes' Iam still getting the "event

Hello! I know this must be an old topic, but I can't quite find an answer in the archive or the Howto. I would like to know if it's possible to show the user quota instead of the disk size when users open their home directoy as a share. (I think it's kind of misleading when it says "480GB free" to a user who has only 500 MB space.) Thanks! Marian

Hi, This is a froward message from tcpdump-workers mail list: === 8< ================ >8 === From: ef <blob.bb.a@gmail.com> Subject: tcpdump -z: command execution Date: Fri, 27 Aug 2010 09:33:48 +0200 To: tcpdump-workers@lists.tcpdump.org Hello, Thx for tcpdump, very valuable tool! Was looking at the new version of tcpdump a few days ago and saw this option: " -z Used in

does anonybody know what is the status of gsm codec in snom phones ? they were some issuses in archives, some problems so i would like to know what is the actual status. best regards Marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/ majo at sunteq dot sk

hello, i found in list archives some notes about grandstream sip voip phones. Does anybody succesfuly tested those phones with asterisk ? Mark ? What about the prices ? regards Marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/ ------------------------------------------------------------ A mind

Hi All, Hopefully someone with broad overview of CentOS compatibility issues can comment on this: I am evaluating a Supermicro X10SLM motherboard with an Intel E3-1231 v3 CPU. Testing with boots from Live DVDs, the CentOS 6.x family is panicking at boot time. I have tried 6.8, 6.5, and 6.3, and each one panics at slightly different points, but they all seem to fail after udev starts up (or

Dear all, I would like to forward a port to an internet server, but failed. can you help me? Server: eth0: 192.168.1.250, Port: 8080 TCP, CentOS 5.6 Remote server: IP: a.b.c.d Port: 8181 Forward path: client1(192.168.1.10) -> 192.168.1.250:8080 (forward) -> a.b.c.d Port: 8181 ----------------------------------------- In Fedora, I successfully to config the firewall using

hello, does anybody know how to setup avm fritz pci card in p2p mode ? regards marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/ ------------------------------------------------------------ A mind is like a parachute... it only works when it's open.

Hello, just a question: Speex is in 1.2 beta 1 for some years. Is there any plan to finalize the 1.2 edition? Are there any planned improvements? Best regards Marian

Hello, I've been using rsync on some backup servers for years. In 2011 we had a situation where the FS of the backup server was behaving strange, even thou there was enough available I/O, the fs(ext4 on 16TB partition with a lot of inodes) was lagging. After much testing we found that rsync was hammering the fs too hard. At that point I patched rsync to add a stupid option which will sleep

Hi, to prevent scripted dictionary attacks to sshd I applied those iptables rules: -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -m recent --update --seconds 60 --hitcount 4 --name SSH --rsource -j DROP -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -m recent --set --name SSH --rsource And this is part of logwatch: sshd: Authentication Failures: unknown

All, Has anyone seen INVAL messages on an IAX link before? I'm occasionally getting them from my Gateway provider, and I need to narrow down the potential cause. Symptoms are: Incoming calls fail, I see NEW, AUTHREQ then INVAL messages between the two A*k boxes... then for no reason at all it'll start working ok again.. My Asterisik: 1.2.10, Gateway A*k : 1.2.0

hello all, isit possible to do sth. so that if the sip-phone is in use and a call is incoming that the caller gets a busy signal? coz i wan to have the incoming party get a busy signal if i'm at phone. regards rene -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061120/6f438f28/attachment.htm

Dear Speex developers, I am currently experimenting with Speex on Symbian smartphones. I have compiled the Speex library, and I am now using it in the following way: 1. Record 320-byte buffers of data in PCM16 format, 8000 Hz sampling rate. 2. Feed the resulting buffer to an instance of a narrowband Speex encoder. 3. Send the encoded data over RTP. 4. Upon receiving on the other side, feed the

Not sure where to start on this. I went to examine a log file today and noticed a password protected internal file was being accessed from 16.0.0.0. Upon further review every log entry has the same IP. Accessing apache from localhost also reports 16.0.0.0. Google is not being my friend right now, any advice? Kernel: 2.6.9-89.0.29.Elsmp In the chroot: httpd-suexec-2.0.52-41.ent.7.centos4

Hello everyone, Im having a issue that I just cant seem to figure out. We currently are running an email server Centos 5.6 Postfix/Dovecot with a squirrelmail frontend. I was setting up a testbed to do a migration to SoGo using LDAP/MYSQL/POSTFIX/Dovecot. I have everything up and functional but one thing is giving me an issue. The testbed box will not handle a users mailbox over 2gb. We are using