similar to: large SCSI RAID, replacing server

I'm running a piece of network backup software called 'bacula', on a minimal CentOS 6.4 install. I got everything working pretty well, but there's one piece giving me some problem-- a component which gives status info via a GUI. In the past, on previous installations, I could ssh to the bacula server with the -X option, and run the application (called 'bat'), and it would

I'm curious why any user logged in at the console can issue the 'reboot' command and reboot the system.? I've tested/verified this to work, and read some older posts about this.? If it were a bug, I suspect it would be fixed by now. Also, if a user is logged into the console, and then logs in via ssh from another system, that user can also reboot the system from that ssh

Hello, ? I'm trying to configure my system such that I have a TCP port listening which will send all data it receives to a serial port. ie:?? tcp/2112? -->? /dev/ttyS0 My goal would be to be able to: Use netcat to create the listen and redirect to a serial port: ? $ nc -l 2112 > /dev/ttyS0 Then in another window, run minicom at /dev/ttyS0 Then in a 3rd window, ? $ telnet localhost

I've been poking at this for quite a while, and have never been able to get it to work. I've found a couple links with some partial truths: ? http://syslint.com/syslint/how-to-make-a-usb-boot-disk-for-centosrhel-from-iso-file/ ? http://brakkee.org/site/2013/05/09/creating-a-usb-install-for-centos-6-4/ The first one talks about converting a standard iso to a 'hybrid' image, using:?

Hello, I have a server with an 17tb scsi-storage. In past, the storage has a "jfs"-filesystem. Now i want to create a "ext4"-filesystem. I have update the e2fsprogs from 1.41 to 1.42 (16tb limit >1.41). Now I have an 17tb-storage as /dev/sda1 with ext4. I can mount this device as /home/ (/etc/fstab "/dev/sda1 /home/ ext4 defaults 1 2". Now I start a

In order to create a bootable CentOS installation USB thumb drive, there are several steps one must follow.? The process often involves using a Windows box, which can be kinda annoying. The Linux Mint distro has what they call a "Hybrid" iso image. ?(see: ? http://community.linuxmint.com/tutorial/view/744 ) This image can be written to a thumb drive and used for installation simply by

Hello, I'm curiuos if anyone knows if it's possible to set up a Dell R515 (which has PERC H700) to be JBOD. It seems the only options are RAID0 or RAID1. I read posts, where people say it can by done by making each disk its own RAID0.? This works, but it wigs out when that disk is removed, and forgets a disk was ever there (unless I go back in the PERC and fix it). My plan is to have a

> I'm having an issue getting a C6.6 install to work on a 3 TB dual hard >drive system, raid 0. I'm hoping that someone here can help. 1: Is this system booting UEFI or BIOS? 2: Is the disk partitioned with MBR or GPT? 3: Is /boot on its own partition? 3TB drives are larger than MBR and BIOS properly support, so they're only really expected to work on a system partitioned with

OS= CentOS 5.4, 64bit. I've always had great luck using dd to copy entire disks, and booting on other systems.? However, I'm having difficulty with a couple systems.? I boot using an install DVD so the OS disk is quiet, and dd to my target disk: # dd if=/dev/sda of=/dev/sdb bs=1024k /dev/sdb is the blank disk.? The disks are 2T.? After a few hours the operation is complete.? But when I

On 01/13/2015 12:47 PM, Gordon Messmer wrote: >> I'm having an issue getting a C6.6 install to work on a 3 TB dual hard >> drive system, raid 0. I'm hoping that someone here can help. > 1: Is this system booting UEFI or BIOS? > 2: Is the disk partitioned with MBR or GPT? > 3: Is /boot on its own partition? > > 3TB drives are larger than MBR and BIOS properly

On Tue, July 10, 2012 23:22, Joseph Spenner wrote: > On Jul 10, 2012, at 7:17 PM, "Michel Donais" <donais at telupton.com> > wrote: > >> Why in 6.3 they move OpenOffice to LibreOffice? >> >> >> --- >> Michel Donais >> _______________________________________________ >> CentOS mailing list >> CentOS at centos.org >>

I have a simple requirement/test I'm trying to perform, but having difficulty. I have a system with 2 interfaces, BoxA: eth0? 172.26.50.102 eth1? 192.101.77.62 My goal is to have a tcp port built on BoxA such that hosts on the 192.101.77.0/24 network can reach a port on a different box on the 172.26.0.0/16 network. The target system is 172.26.10.120?? tcp/22 The port I wish to build is

Hi, is it possible to Restore files deleted with " rm rf " from ext4 or ext3 filesystem by mistake. Regards Ahmad

i''ve installed XCP 1.5-beta. i''m a little confused as to what has happened. everything so far seems to work. however, i need more information on what was done to my hard disk during the installation and how was the file system set up. in particular, i was investigating how to create a new logical volume to place my ISO file to use as my ISO storage (SR). i notice (see below with

Hi list this is actually a problem on a debian system but I thought you might be interested to hear of it and perhaps can offer some help. I have a woody box (dell pe750, dual cpu) running a kernel from backports.org (debian 'testing' packages built on a 'stable' box). The kernel version is 2.6.7-1.backports.org.1. This host is hooked up to an Apple Xserve RAID with a 2.3Tbyte

Hello all, would someone please tell me why the following code doesn't "work" (i.e. do what i expected!). I wanted to convert numeric variables in a matrix to ordered (for input as nominal variables into the 'daisy' program). Why does the following code seem to work, but the "is.ordered" command reports that the variables are not ordered (factors)?? > xxx <-