similar to: Firewire 800 PCI-E card?

We have some LaCie 1 TB external disks which work fine on other Linux servers (running Red Hat 9, and Ubuntu 7.04), but which fail to be seen on our CentOS 4.3 system with kernel 2.6.9-34.107.plus.c4smp The interface card is a Sunix 64 bit Firewire 800 ieee1394b adapter plugged into a PCI slot in our Linux server, which is a Tyan Thunder K8SD Pro S2882-D, 64 bit AMD Opteron

I have begun to see these messages in my morning reports: WARNING: Kernel Errors Present pciehp 0000:00:1c.0:pcie04: Link Training Error occurs ...: 146 Time(s) pciehp 0ng Error occurs ...: 1 Time(s) pcieport 0000:00:1c.0: bridge window [mem 0xd0a000000.0 failed with error -22 ...: 1 Time(s) r8168: probe of 0000:01:00.0 failed with error -22 ...: 702 Time(s) r8168:

I'm looking for a recommendation on a PC Firewire-800 host adapter compatible with Linux. Any suggestions for known good ones. I'm connecting a few LACIE external hard drives. Thanks.

I am being given a digital camcorder. It uses Mini DV tapes and either connects via typical RCA cables (IE to a tv) or via FireWire. I don't have the brand on hand, but I was told it can be ripped to DV like any standard FireWire camcorder (I believe dvgrab will be sufficient). I just installed an older FireWire card I have that I used at one point in Fedora for my iPod. It was a PITA

Hi All, I installed a new CentOS 5.5 box and I am getting a daily e-mail (I am not sure how this was triggered) with XNTPD logs, HTTP Error and Disk Space). It is being sent to root at www.6colors.co which bounces, but I have a catch all so it does get to me. How do I change where this e-mail is sent? I have tried in /etc/postfix/main.cd, master.cf, bounce.cf.default, etc and I don't see

Hello All, Try as I might, I cannot get Zimbra 8.0.3 to install on CentOS 6.4, even with --platform override. I followed some tutorials even that show the result working and nada. Can anyone suggest a good setup for e-mails erving, calendaring, web mail? Web mail is particularly important for my wife so she can check e-mail when she is at work. Jason

Hello List, The main issue is server selection regarding PCI bus connectivity for Asterisk solutions. Most offerings on HP Proliants, something I've been looking into, include PCI-X and/or PCI-e expansion slots. I know PCI-e is totally different from PCI and PCI-X so, for now, that's not an issue. However, regarding PCI and PCI-X, and after googling for a while and checking wikipedia

On 04/03/2017 06:17 PM, Chris Adams wrote: > Once upon a time, Alice Wonder <alice at domblogger.net> said: >> I need a low profile PCI-E card that allows for up to 2 M.2 SSD >> drives that is known to work with the stock kernel in CentOS 7. >> >> Can anyone recommend one? > > I can't recommend a specific one, but any adapter card should work. >

Hi, I have Orinoco 802.11b PC Card from Proxim. I plugged it to pcmcia slot, but It doesn't work - no blinking LEDs, no wi0 in ifconfig. I have 7.1-PRERELEASE, laptop Prestigio Nobile 157. On NetBSD seems working, but NetBSD is not friendly with me. if_wi driver included in kernel. ----- dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,

Hi All, I have a Drobo, connected to a CentOS 6.4 box. The box sees it as /dev/sdg. I want to format it ext3 (as they dont support ext4) but when I try I get: # fdisk -u /dev/sdg WARNING: GPT (GUID Partition Table) detected on '/dev/sdg'! The util fdisk doesn't support GPT. Use GNU Parted. WARNING: The size of this disk is 17.6 TB (17592186044416 bytes). DOS partition table

Hello: I am looking for a recommendation for a PCI-e RAID card for my server. The server has a PCI-e x16 low profile slot so the card has to be at most 6.6 inches long x 2.536 inches high. I would like to use RAID 5 with 3 drives so I have to have those capabilities. It has to be CentOS 5.4 compatible (Of course!). I took a look at the offerings from 3Ware, but their cards are too long. If

Hi..... I just bought a External HD with USB/FireWire interfaces. I was trying to connect it by firewire and nothing happened, but it's connected by USB, there is no problem. This is the "fdisk - l" output when i connect it by USB Disco /dev/sdc: 160.0 GB, 160041885696 bytes 255 cabezas, 63 sectores/pista, 19457 cilindros Unidades = cilindros de 16065 * 512 = 8225280 bytes

Once upon a time, Alice Wonder <alice at domblogger.net> said: > I need a low profile PCI-E card that allows for up to 2 M.2 SSD > drives that is known to work with the stock kernel in CentOS 7. > > Can anyone recommend one? I can't recommend a specific one, but any adapter card should work. However, note that M.2 is not a single "thing" to the computer; the drive

4.4.2017, 4.21, Alice Wonder kirjoitti: > > Thanks! I ordered a 2.5" SATA drive and they screwed up and sent me M.2 > - I'll be sure to look at the booklet (Intel SSD 5 but there may be more > than one variant?) Intel 5 series SSDs use SATA interface, so the discussion about NVMe support doesn't apply in this case. You can use an adapter like this to mount it in a

A bit more info about my system; I edited /etc/modprobe.d/blacklist-firewire and commented out the blacklist like so it looks like so; #blacklist firewire-ohci Running lspci returns; 10:0b.0 Firewire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 02) lsmod | grep firewire returns; firewire_sbp2 50897 0 firewire_core 79305 1 firewire_sbp2 scsi_mod

I got a WD 1TB My Book with eSATA/USB/Firewire400 connectivity to backup data on a client Centos 5.1 machine. USB 2.0 works fine out of the box but is rather slow, Nautilus predicts about 1+ hour to fully backup just one day's worth of data or about 100GB. So I was hoping Firewire would be faster, which is why we got the version with all 3 interfaces to experiment with first. Following the

Hi all! I'm trying to use my first-ever firewire device, and just OOB I'm not getting very far, so advice would be appreciated. When I plug in the device I see some entries in /var/log/messages: Jul 27 14:50:30 fcshome kernel: firewire_core: phy config: card 0, new root=ffc1, gap_count=5 Jul 27 14:50:31 fcshome kernel: firewire_core: created device fw1: GUID 0003f300118123f9, S100

Hi folks: Firewire was not supported in 4.0 due to the upstream provider not including it. Is it in 4.1? Or is it still out of the mainline upstream kernel provider? What about centosplus? Centosplus has been listed as unsupported. I presume this means that they are/were one-off builds with missing functionality (e.g. xfs, etc), and are not updated. Is this the case? I am looking

Hello, Having a problem getting Centos to see my firewire connected camcorder. Here what I have thus far; Installed the kernek fron centos-plus and checked that libraw1394.x86_64 and libraw1394_8.x86_64 are installed Kernel i'm running is 2.6.9-34.106.unsupported here are some outputs from my machine; ~ $ lspci | grep -i firewire 00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE

Hi! After switching from UMS (dated 20090701+c0bf670) to KMS (as of 2010-02-01), almost any X activity causes buffer underruns on my firewire soundcard. When the X pointer changes from arrow to the vertical text selection bar, firewire streaming is interrupted. Same with scrolling in firefox or hovering over a link, thus changing the pointer to "hand". Looks like nouveau is disabling