similar to: Intel 10Gb network card

I finally got a 10G card that is recognized by FreeBSD (9.1-stable): ... ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.4.8> port 0xecc0-0xecdf mem 0xd9e80000-0xd9efffff,0xd9ff8000-0xd9ffbfff irq 40 at device 0.0 on pci4 ix0: Using MSIX interrupts with 9 vectors ix0: RX Descriptors exceed system mbuf max, using default instead! ix0: Ethernet address: 90:e2:ba:29:c0:54

Hi, I have a Dell T710 with 4 X 10G ethernet interfaces (2 X Dual port Intel 82599 cards). It is running FreeBSD RELENG_8 last updated on July 13. What I see is packet loss (0 - 40%) on IPv6 packets in vlans, when the machine is not the originator of the packets. Let me try to describe a little more. If a neigbouring machine ping6 it, there will be packet loss. If it act as a router for ipv6,

Hi list, since we activated 10gbe on ixgbe cards + jumbo frames(9k) on 9.0 and now on 9.1 we recognize that after a random period of time, sometimes a week, sometimes only a day, the system doesn't send any packets out. The phenomenon is that you can't login via ssh, nfs and istgt is not operative. Yet you can login on the console and execute commands. A clean shutdown isn't possible

Hi In a dataset I have length and age for cod. The age, however, is ony given for 40-100% of the fish. What I need to do is to fill inn the NAs in a correct way, so that age has a value for each length. This is to be done for each sample seperately (there are 324 samples), meaning the NAs for sampleno 1 shall be calculated from the known values from sampleno 1. As for example length 55 cm

Hi, I'm trying to read a subset of a netcdf file into R, but although I'm relatively experienced using R, I'm still new to netCDF files, so this may be a very simple/stupid question! I've included an example of the type of file I'm looking at here. www.met.reading.ac.uk/~swp06hg/ccd1983_01-dk1_20.nc (~7Mb) It's a 2D array of the variable CCD along with its lat and

Greetings All! As is often the case on this list, the answer may well be under my nose but I can't see it! I am looking for a "smart" way to do the following. Say I have a vector of values, X. I set up bins" for X, say with breaks at B = c(b1,b2,...,b11) covering the range of X, i.e. bins numbered 1:10. The value x is in bin i if B[i] < x <= B[i+1] What I seek is a

Hi there We have a pair of servers running FreeBSD 9.1-RC3 that act as transparent layer 7 loadbalancer (relayd) and pop/imap proxy (dovecot). Only one of them is active at a given time, it's a failover setup. From time to time the active one gets in a state in which the 'thread taskq' thread uses up 100% of one cpu on its own, like here: ---- PID USERNAME PRI NICE SIZE

Greetings, The following question has come up in an off-list discussion. Is it possible to construct a regular expression 'rex' out of two given regular expressions 'rex1' and 'rex2', such that a character string X matches 'rex' if and only if X matches 'rex1' AND X does not match 'rex2'? The desired end result can be achieved by logically combining

I'd welcome some comments or advice regarding the situation described below. The following illustrates what seems to me to be an inconsistency in the behaviour of matrix subsetting: > Z<-matrix(c(1.1,2.1,3.1,1.2,2.2,3.2,1.3,2.3,3.3),nrow=3) > Z [,1] [,2] [,3] [1,] 1.1 1.2 1.3 [2,] 2.1 2.2 2.3 [3,] 3.1 3.2 3.3 > dim(Z) [1] 3 3 >

Dear all, What is the quickest and most efficient way to diff two data frames, so as to obtain a vector of indices (or logical) for rows/columns that differ in the two data frames? For example, > Xe <- head(mtcars) > Xf <- head(mtcars) > Xf[2:4,3:5] <- 55 > all.equal(Xe, Xf) [1] "Component 3: Mean relative difference: 0.6863118" [2] "Component 4: Mean relative

Dear R'sians, Would really appreciate if you could suggest a more efficient way to order the columns of a dataset. The column names of the dataset contain indices separated by a period. Following are examples of my code and the dataset. oC <- function(tg=x2) { lth <- length(grep("T",names(tg))) thix <-

On Mon, Oct 17, 2011 at 05:36:27PM +0200, Dario Faggioli wrote: > Hi everyone, > > I''m trying to setup PCI-passthrough for a network card on a testbox. > With HVM, everything seems to work, while if I try with a pv-guest the > domain crashes! > > Here''s the thing: > -- > # xl pci-list-assignable-devices > 0000:07:00.0 > 0000:07:00.1 > >

Hi, I maintain a driver for a 10GbE nic which supports multiple hardware tx/rx rings. We can steer rx packets into rings using the "standard" NDIS6 Toeplitz hashing on TCP port numbers, IP addresses, etc. We can also steer packets based on MAC address. Would this NIC be considered to be capable of supporting crossbow? Also, can crossbow do things like steer outgoing packets to the

Hi, I am trying to configure two identical systems with the following setup. dom0: Centos 6 OS on Apple Xserve i7 server with PCI cards for 4GB FC (LSI FC949ES) and 10GB Ethernet (Intel 82598EB) dom1: Centos 5 OS with passthru mode of PCI 4GB FC and 10GB Ethernet (ixgbe and mptfc blacklisted in dom0) Everything starts ok, but networking in dom1 using the 10GB interface has extremely high rtt

Hi all, Anyone knows if exists some plan to support Intel 10Gbps nics like ?for example 82575, 82576, 82580 or 82598EB Ethernet controllers under KVM for virtual guest like it does with e1000 driver? Regards, C. L. Martinez

Team I have a Dell PowerEdge R720xd, with the Broadcom NetXtreme bcm5720. I found the following thread: http://forums.freebsd.org/showthread.php?t=31769 I find I am unable to use the NIC's (there are 4 on the server). When we put a cable into it we get a "watchdog timeout -- resetting" error, and the machine will pause for 5 or so seconds. IP may or may not come up randomly.

The correct kernel configuration for VMDq support is CONFIG_XEN_NETDEV2_VMQ, not CONFIG_XEN_NETDEV2_BACKEND. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> diff -urpN a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h --- a/drivers/net/ixgbe/ixgbe.h 2009-02-06 09:03:44.000000000 -0800 +++ b/drivers/net/ixgbe/ixgbe.h 2009-02-10 14:32:57.000000000 -0800 @@ -35,7 +35,7 @@

This patch adds experimental VMDq support (AKA Netchannel2 vmq) to the ixgbe driver. This applies to the Netchannel2 tree, and should NOT be applied to the "normal" development tree. To enable VMDq functionality, load the driver with the command-line parameter VMDQ=<num queues>, as in: $ modprobe ixgbe VMDQ=8 You can then set up PV domains to use the device by modifying your VM

Hello everyone, I'm having problem with SR-IOV transparent VLAN. My host is Fedora 22 and my guest is: pfSense 2.3. The NIC is Intel 82576. I'm using pfSense Packet Capture to check the packet and find that inbound packet still have the vlan tag. The outbound packet seem fine because the router can receive DHCP discover packet from the guest and then send DHCP offer and ARP request

In crossbow, each mac_srs has a kernel thread called "mac_rx_srs_poll_ring" to poll the hardware and crossbow will wakeup this thread to poll packets from the hardware automatically. Does crossbow provide any method to disable the polling mechanism, for example disabling the this kernel thread? Thanks Zhihui -------------- next part -------------- An HTML attachment was scrubbed... URL: