similar to: Trouble shooting a SAMBA 4 installation

> > Hi !!! > > I've managed to make Samba 4.6.4 run on AIX 6.1. Packages from OSS4AIX. I > have two shares both are read write, but I'm not allowed to write on them. > > This is my [GLOBAL]: > > [global] > bind interfaces only = Yes > interfaces = 127.0.0.1 en0 > netbios name = P7-AIXTEST > realm = MYCOMPANY.LOCAL >

I'm running Samba 4.3.3-3.1 on SLES 11. I'm debugging a configuration as Domain member. I've configured some read only shares. This is my configuration in smb.conf [to_company] comment = Tray to company path = /home/company/interfaces/bandejas/to_company browseable = yes guest ok = yes writeable = no force user = company force

Hi !!! I've had configured a samba 3.0.21c PDC on a SuSE 9.3 with the RPM I've downloaded from http://www.samba.org. My PDC uses LDAP as backend. I have a Windows 98 client and a Windows XP Professional SP2 client. The windows 98 client lets all the users log in happily and everything works as expected, the Windows XP has a very weird an annoyuing behaviour. After booting both the

I have a Samba server in a SuSE Linux 10.1 installation (x86_64 P IV), installed from SuSE RPMs (Samba 3.0.22). In our test instalation all our clientes works without problem, but from time to time, our users with Windows XP Service Pack 2 get a extrange error when trying to access or write some files. We have isolated the problem to shared folders that have a read and/or write list. We have this

I have a bunch of servers, where I''ve deployed shorewall-lite. For us is very useful to have a centralized repository of the firewall rules deployed in our servers. One of this servers is pretty busy, handling lots of connections. In that server I''m getting from time to time this message: ip_conntrack: table full If I where working in a custom made iptables firewall I will

Hi !!!!! I have installed samba 3.5.4 on OpenSuSE 11.3. It's configured as a PDC with LDAP backend.The LDAP backend was populated with the help of smbldap-tools. Here is the global section of my smb.conf [global] workgroup = ARAMDA map to guest = Bad User passdb backend = ldapsam:ldap://localhost log level = 3 log file = /var/log/samba.log printcap

Hi all, I noticed that my ssh logins to a particular server were taking up to 5 seconds to finally login. My tcpdump -vv weren't producing much output (not good) and my pings to and from that host were normal and almost identical to other hosts on my subnet that had no ssh login delay issues. Log files also showed nothing alarming. My hosts file was missing this at the very end of

To help users diagnose boot errors, especially with external devices such as USB flash memory mass-storage, I've created this diagnostic MBR. It succinctly reports the values received from the BIOS, locates and reads the active partition boot sector, reports the magic bytes and and read-sector error code. Holding down a shift key during boot will force CHS mode even if LBA is detected.

Changes: * Fix [C]HS indicator over-write (was showing '5' not 'C') * Use 0xDEAD as magic-bytes filler to make it clear when read_sector didn't replace it * Improvements to commentary and description. TJ (1): Add Diagnostic MBR for trouble-shooting mbr/Makefile | 6 +- mbr/mbr-diag.S | 372 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files

Changes: * If Ctrl key is pressed force load from first hard disk (0x80) To help users diagnose boot errors, especially with external devices such as USB flash memory mass-storage, I've created this diagnostic MBR. It succinctly reports the values received from the BIOS, locates and reads the active partition boot sector, reports the magic bytes and and read-sector error code. Holding

Could anyone outline a method for trouble-shooting these messages "SIP/2.0 482 Loop Detected" I'm seeing on a particular peer? There is no call going on when these pop up. Sip read: SIP/2.0 482 Loop Detected Via: SIP/2.0/UDP 207.149.XX.XX:5060;branch=z9hG4bK0a322471 From: "asterisk" <sip:asterisk@207.149.241.3>;tag=as395506d6 To:

Help me!!!Lol I''ve been working with RedCloth but it''s runed my layout because it put the <p> and </p> is there a way to remove this without gsubing it up or if I do what the prettiest I can make it? -- Posted via http://www.ruby-forum.com/.

Hi !!! I've Samba 3.3.12 running on AIX, I have a few windows 7 using a shared resource on that server. This is the shared resource definition: [shared_disk] comment = shared_disk path = /home2/nfs-chiappe/shared_disk valid users = user1,user2 write list = @staff read only = No create mask = 0764 This particular Windows 7 Computer is driving

This samba is scheduled for upgrade. We've been testing samba 4.3.8 packages (from BULLFreeware) on other AIX. It was not easy the install, even with RPM packages. I hope to do the upgrade soon, but I need to have this particular user working now. What puzzles me is that I have other windows 7 PCs happily working on the same resource. 2017-01-04 16:21 GMT-03:00 Rowland Penny via samba

Hello I have the following problem using chan_oh323 I have DialGate 2160 for SystemBas (www.sysbas.com) connected to PSTN (H.323 to FXO/FXS gateway) when i try to make call form one pstn phone to other trough asterisk or when i make call from software h.323 client trough asterisk and this gateway to pstn i have the problem with voice quality. The side that initiated call can be heared clearly,

--- mbr/Makefile | 6 +- mbr/mbr-diag.S | 371 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 376 insertions(+), 1 deletions(-) create mode 100644 mbr/mbr-diag.S diff --git a/mbr/Makefile b/mbr/Makefile index 0bdf7e3..b9d743d 100644 --- a/mbr/Makefile +++ b/mbr/Makefile @@ -17,7 +17,7 @@ topdir = .. include $(topdir)/MCONFIG.embedded -all: mbr.bin gptmbr.bin

--- mbr/Makefile | 6 +- mbr/mbr-diag.S | 377 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 382 insertions(+), 1 deletions(-) create mode 100644 mbr/mbr-diag.S diff --git a/mbr/Makefile b/mbr/Makefile index 0bdf7e3..b9d743d 100644 --- a/mbr/Makefile +++ b/mbr/Makefile @@ -17,7 +17,7 @@ topdir = .. include $(topdir)/MCONFIG.embedded -all: mbr.bin gptmbr.bin

I have a server that runs shorewall lite. This server has a custom configuration of the semaphore setting. The configuration is set in /etc/sysctl.conf . It works fine most of the time. We have a daemon that crashes, we found that is a semaphores config issue. After the crash we found that semaphore parameters are reseted to defaults. The only event we found is a reload of firewall rules. I

I have a share that is called \\server\mantenimiento. This server is intended to be acceded by my operators, that do renaming of files and prunning in all the shares. We're ussing samba 3.023rc3. Today they called me in order to show me that a directory named \\server\mantenimiento\con was lost, in fact it isn't lost samba shows it as smb://server/mantenimiento/CSHOFG~F. it appears to

Hi all, I tryed to setup an Activie Directory domain using samba 4.1.12. I followed some documentation and get everything working till the I wanted to connect my windows 7 with RSAT in order to manage the AD Domain. The message I receive is : "The client cannot connect to the requested machine. Please check IIS or WINRM are properly configured" this is a translation from the french