similar to: Help with filing a [maybe] ZFS/mmap bug.

Are there any tools to decode encrypted part of isakmp provided that identities of both peers are known to me and that I am able to observe the whole exchange ? -- Andriy Gapon

After some poking into psm.c code I've got some results. First, for the archives, debug.psm.loglevel tunable is much more useful than a verbose boot for debugging PS/2 mouse issues. A good value is 2. Second, I fiddled with various probe methods to force them to "recognize" my mouse (by loosening their checks) and found out that the mouse works perfectly if it is treated as

System: FreeBSD 7.1-STABLE i386 (revision 187025) Panic message: kernel trap 12 with interrupts disabled Fatal trap 12: page fault while in kernel mode fault virtual address = 0xd2006ad0 fault code = supervisor write, page not present instruction pointer = 0x20:0xc05623aa stack pointer = 0x28:0xdd4f6c34 frame pointer = 0x28:0xdd4f6c40 code segment

I've just realized that I see in releng/7 something that I did not see in releng/6 - even if I use a file with custom rules in firewall_type I still get default loopback rules installed. I think that this is not correct, I am using custom rules exactly because I want to control *everything* (e.g. all deny rules come with log logamount xxx). -- Andriy Gapon

This is a fairly standard and old machine with 2 COM ports. Recently (last Friday) I decided to update my RELENG_7 system and also to transition from sio to uart. This what I had before the upgrade: kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 kernel: sio0: type 16550A kernel: sio0: [FILTER] kernel: sio1: <16550A-compatible COM port> port

Hi all, I am using an USB memory stick as cache and log devices for a HDD ZFS pool named tank0: $ zpool status -v tank0 pool: tank0 state: ONLINE scan: scrub repaired 0 in 7h19m with 0 errors on Tue Jul 30 06:11:23 2013 config: NAME STATE READ WRITE CKSUM tank0 ONLINE 0 0 0 ada0s1d ONLINE 0 0 0 logs gpt/SLOG

I wouldn't report this if not for one coincidence (which is described below). I have too little facts, so this is more of a mystery problem tale than a real problem report. There are two systems: 1. old, slow, i386, UP, 7-STABLE 2. new, fast, amd64, MP, 6.3-RELEASE Systems are located at different physical locations. What is common between them: 1. they both have the same backup strategy

Hello everyone, I'm unable to read temperature Gigabyte H77-DH3H motherboard. Is that motherboard supported or am I doing it incorrectly? When trying to access hw.acpi.thermal everything appears to be ok, but it is not, the system always returns 27,8C and 29,8C which fooled me initially - the values never change. Here is output: [chinatsu]:/root# sysctl hw.acpi.thermal

I'm trying to make devd run an stty command whenever a USB serial device is attached. Unfortunately, $device-name is ucom[0-9] and the device names are /dev/cuaU[0-9] - how do I get the correct name in the device action? I haven't found a way to extract the number by itself, so I'm stuck with specifying a separate rule for each number, like so: attach 100 { device-name

Hi, Did anyone else experience this? With 9.1-BETA1 the boot process freezes, among the last lines with verbose boot are acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times after this, dead. What is supposed to happen in the next stage? This laptop worked fine with 9-STABLE to at least february. //per

I've now seen this on two different VMs on two different ESXi servers (Xeon based hosts but different hardware otherwise and at different facilities): Everything runs fine for weeks then (seemingly) suddenly/randomly the clock STOPS. In the first case I saw a jump backwards of about 15 minutes (and then a 'freeze' of the clock). The second time just 'time standing

Hi all. I prefer to build all ports in /tmp, which is actually a tmpfs filesystem. I have 8G partition. But when I tried to compile Apache OpenOffice system starts shooting processes when I was near 6G of swap. Oct 11 18:12:32 ar1l0u kernel: swap zone exhausted, increase kern.maxswzone Oct 11 18:12:32 ar1l0u kernel: pid 1334 (java), uid 818, was killed: out of swap space Oct 11 18:12:32

Hi, Is there anything known about ZFS under 10.0-BETA4 when FreeBSD was upgraded from 9.2-RELEASE? I have two servers, with very different hardware (on is with soft raid and the other have not) and after a zpool upgrade, no way to get the server booting. Do I miss something when upgrading? I cannot get the error message for the moment. I reinstalled the raid server under Linux and the other

I have an NFS server and NFS client separated by a firewall. Both servers are FreeBSD 7.1. Server configuration: nfs_server_enable="YES" nfs_server_flags="-t -n 4" rpcbind_enable="YES" mountd_flags="-r -p 737" mountd_enable="YES" The firewall allows tcp and udp to port 111, but only tcp to ports 2049 and 737 (configured for mountd, see above).

Not sure if this is a bug or a feature, but it seems like potential security risk: I have a ufs fs mounted rw+nosuid, then I needed to downgrade it to ro, so I executed mount -u -r on it - imagine my surpise when I found that nosuid flag was removed as well. I know I could have used mount -u -r -o nosuid, but the present behavior seems to be non-obvious (update one flag, orthogonal flags dropped

Hello, I see a reproducable panic when doing ibping and aborting it with ^C. My setup is two machines with Mellanox Infinihost III HCAs (one Linux one FreeBSD) connected back-to-back. Details below. I can upload 2 crash dumps, if this is useful. For some reason the port doesn't become ACTIVE, so no packets arrive, but that is probably unrelated. % uname -a FreeBSD cosel.inf.tu-dresden.de

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello Everyone, On November 30th, FreeBSD 6.4 and FreeBSD 8.0 will have reached their End of Life and will no longer be supported by the FreeBSD Security Team. Since FreeBSD 6.4 is the last remaining supported release from the FreeBSD 6.x stable branch, support for the FreeBSD 6.x stable branch will also cease at the same point. Users of either of

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello Everyone, On November 30th, FreeBSD 6.4 and FreeBSD 8.0 will have reached their End of Life and will no longer be supported by the FreeBSD Security Team. Since FreeBSD 6.4 is the last remaining supported release from the FreeBSD 6.x stable branch, support for the FreeBSD 6.x stable branch will also cease at the same point. Users of either of

Hi, As a next question to my building this server. I'm nogt able to get a full verbose dmesg. Probably because the kernelbuffer for it is too small. I know there used to be a kernel option to increase it. But I can not find it with the setting in NOTES or any other place I looked.... Is it still there? Thanx, --WjW

550.ipfwlimit check in /etc/periodic/security takes into account only global/default verbosity limit and does not account for a specific logging limit set for a particular rule e.g.: $ ipfw -a l | fgrep log 65000 *521* 41764 deny log logamount *1000* ip from any to any $ sysctl -n net.inet.ip.fw.verbose_limit *100* >From security run output: ipfw log limit reached: 65000 519