similar to: Help with decyphering DND status

Arch = x86_64 OS = CentOS-6.4 (freepbx) Asterisk = 11.4.0 FreePBX = 2.11.0.2 We use Snom870 handsets with firmware v.8.7.3.19. I am trying to develop a custom dial plan to invoke a distinctive ring-tone when an external call is transferred internally. Based on an earlier solution I discovered I am attempting this: [from-internal] include => set-alert-if-local [from-internal-original]

I have thsi code in a dial plan. The purpose of which is to set distinctive ring tones for internal and transferred calls. exten => _.,1,Noop(CALLERID_ALL=${CALLERID(all)}) exten => _.,n,Set(CallerIDNum=${CALLERID(num)}) ; This just shows a list of interesting variables and their values ; Comment it out when finished debugging ;include => macro-dumpvars ;exten =>

I have this code in a dial plan: exten => _417XX,n,GotoIf($["${CALLERID(num)}" > "SIP/41799"]?notfromlocal) exten => _417XX,n,GotoIf($["${CALLERID(num)}" < "SIP/41700"]?notfromlocal) The value of "${CALLERID(num)}" appears to be "SIP/41712-00000181" -- Executing [41720 at from-internal:5]

This seems to me to be getting down to some sort of problem with configuring the Snom-870. when I register the device 41712 (set up for transport=tls only) then I see this in the SIP trace: Sent to udp:192.168.6.9:5060 at 4/3/2015 09:07:36:813 (836 bytes): REGISTER sip:voinet09.internal.hamilton.harte-lyne.ca:5061 SIP/2.0 Via: SIP/2.0/UDP 192.168.6.112:5060;branch=z9hG4bK-udx92poqese6;rport

I am getting this error when trying to access a virtual website index by ip address and port on a host that has SELinux disabled (another issue over which I have less control than I wish): curl http://192.168.6.9:41780 | more Gives this error in /var/log/httpd/error_log [Mon Jun 10 09:04:44 2013] [error] [client 192.168.6.9] Directory index forbidden by Options directive: /tftpboot/ and

On Wed, February 18, 2015 13:07, Les Mikesell wrote: > On Wed, Feb 18, 2015 at 11:39 AM, James B. Byrne > <byrnejb at harte-lyne.ca> wrote: >> 2. How does one configure the routing table on network startup to >> specifically detail the route particular addresses are supposed to >> take? >> > > Not exactly sure how routing works with aliases on the same

Am 03.03.2015 um 18:16 schrieb James B. Byrne: > CentOS-6.5 (FreePBX-2.6) > Asterisk-11.14.2 (FreePBX) > snom870-SIP 8.7.3.25.5 > > I am having a very difficult time attempting to get TLS and SRTP > working with Asterisk and anything else. At the moment I am trying to > get TLS functioning with our Snom870 desk-sets. And I am not having > much luck. > > Since this

CentOS-6.5 (FreePBX-2.6) Asterisk-11.14.2 (FreePBX) snom870-SIP 8.7.3.25.5 I am having a very difficult time attempting to get TLS and SRTP working with Asterisk and anything else. At the moment I am trying to get TLS functioning with our Snom870 desk-sets. And I am not having much luck. Since this is an extraordinarily (to me) Byzantine environemnt I am going to ask if any of you have gotten

On Thu, April 9, 2015 12:37, Tafadzwa Nyabasa wrote: > Hi There, > > Does anyone know how to program Snom phones using a Mac addresses like > what > is done with the Ciscos. I have about 50 extensions to be programmed > and I > am hoping there is a way on Asterisk to program extensions on the snom > phones. Please assist. > > Regards > I do not think that this is

Hi, I recently upgraded a smb server from Ubuntu 18.04 to Ubuntu 20.04 which required the Samba version to be upgraded from 4.7.6 to 4.15.13. Post the upgrade, winbind authentication fails with NT_STATUS_RPC_SEC_PKG_ERROR intermittently. The error goes away on restarting the smb service but comes back after some time. There were no isses with the setup before the upgrade. Tried clearing the

On Thu, February 19, 2015 12:33, Les Mikesell wrote: > On Thu, Feb 19, 2015 at 9:48 AM, James B. Byrne > <byrnejb at harte-lyne.ca> wrote: >> >>> I added these directives to the route-eth0:192 file: >>> >>> ADDRESS0=192.168.6.9 >>> NETMASK0=255.255.255.0 >>> GATEWAY0=192.168.6.1 >>> >> >> Which should have been:

Arch = x86_64 OS = CentOS-6.4 (freepbx) Asterisk = 11.4.0 FreePBX = 2.11.0.4 Snom870 FW = 8.7.3.19 /8.4.8beta I would like to change the background colours on the BLF vkey field based on the station status. I posted the following to the Snom support forums some days back and have had no response so I am asking here in the hope than one or more of you have done something like this: I have the

On Thu, February 19, 2015 10:19, James B. Byrne wrote: > > I added these directives to the route-eth0:192 file: > > ADDRESS0=192.168.6.9 > NETMASK0=255.255.255.0 > GATEWAY0=192.168.6.1 > Which should have been: ADDRESS0=192.168.6.0 NETMASK0=255.255.255.0 GATEWAY0=192.168.6.1 Sigh. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne

Hi im trying to use an application on MsAccess , first a try to open a single mdb and i get: wine Access\ 97\ Runtime/Msaccess.exe "c:\Informes.mdb" fixme:font:SetMapperFlags (0x224, 0x00000001): stub - harmless fixme:ole:CoRegisterMessageFilter stub fixme:ole:DllDebugObjectRPCHook stub fixme:ole:MSFT_ReadValue BSTR length = -1? fixme:ole:ITypeInfo_fnAddressOfMember (0x7e93ecc8) stub!

Hello, I work in a hosting company, we have tens of Xen dom0 running just fine, but unfortunately we do have a few that get out of control. Reported behaviour : - dom0 uses more and more memory - no process can be found using that memory - at some point, oom killer kicks in, and kills everything, until even ssh the box becomes hard - when there is really no more process to kill, it crashes