similar to: 4.3 regression in booting on a particular platform

Hey guys, I am posting this again....because i didnt get any replay. Please I am doing my thesis and I am stack installing a guest machine from Yocto, a unix like machine. It boots successfully on the same host without xen. thank you again, Nas On Tue, Jun 4, 2013 at 5:37 PM, nesredin mahmud <nasmitlinux@gmail.com>wrote: > hello everyone, > > I am experiencing DomU booting

Hi. I got a asus SABERTOOTH 990FX, reading about vt-d, I read the MoBo that support IOMMU and there was chip 990FX, them I pick this MoBo, the BIOS that came with the board was 0402 05/11. I follow the xen wiki, I''m running Xen 4.1.1 from Gitco on Centos 5.7 x64, by default the MoBo have the IOMMU disable, I enable the feature IOMMU = 64MB, save the bios settings, restart, turn off

Package: xen-hypervisor-4.4-amd64 Version: 4.4.1-9+deb8u1 Severity: important I already posted this on the xen-devel-mailinglist but no one seems to have an answer. I'm posting it here because perhaps someone using Debian and Virtualization might have an idea about this? Since Debian 8 I observe that live migrating a PVM on XEN 4.4.1 (also 4.5.1) and Linux Kernel 4.1.0 (also 3.18) requires

Package: xen-hypervisor-4.1-amd64 Version: 4.1.4-3 Severity: grave Justification: causes non-serious data loss -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash

Hi, I''ve not tried pv_ops for a long time but just got a new system (Supermicro X9DRL-iF) so decided to try 3.5.0 with the latest Xen 4.2-unstable, unfortunately the system crashes immediately after loading dom0: traps.c:486:d0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000] I''ve tried loading both bzImage and vmlinuz (gzip compressed vmlinuz) with the same

Hello Wei, On Sun, Jun 9, 2013 at 1:26 PM, Wei Liu <wei.liu2@citrix.com> wrote: > On Sun, Jun 09, 2013 at 11:58:26AM +0200, nesredin mahmud wrote: > > Hey guys, > > > > I am posting this again....because i didnt get any replay. Please I am > > doing my thesis and I am stack installing a guest machine from Yocto, a > > unix like machine. It boots

Hi all I?ve got a few Intel Z87 chipset machines with Adaptec 5405 raid cards (latest firmware), they work fine on 3.18 but during Dom0 boot using kernel 4.9.13 it hangs at ?Using clocksource tsc? and the aacraid driver keeps trying to reset Has anyone seen anything like this? I?ve tried specifying clocksource=xen in grub instead of the default of tsc, and that has the same issue. HPET is

When booting a recently compiled Xen 4.2 on Ubuntu 12.04, dom0 crashes. I''ve included a serial console log below. I''ve used: Xen 4.2 unstable rev. 25483, compiled on the same machine. I had to apply the AT_EMPTY_PATH patch from http://lists.gnu.org/archive/html/qemu-devel/2012-02/msg03460.html to get it to compile. Linux 3.2.0-25, which is the default kernel in Ubuntu''s

On Sun, Apr 2, 2017 at 9:22 PM, Sarah Newman <srn at prgmr.com> wrote: > On 04/02/2017 02:49 AM, Chris Elliott wrote: >> Hi all >> >> I?ve got a few Intel Z87 chipset machines with Adaptec 5405 raid cards (latest firmware), they work fine on 3.18 but during Dom0 boot using kernel >> 4.9.13 it hangs at ?Using clocksource tsc? and the aacraid driver keeps trying to

I''m running Xen 4.1 (4.1.3-3ubuntu1.3) on an Ubuntu 12.10 server with an AMD FX-8150 processor (8 cores) and 16 GB of RAM. When I boot the server, Xen sees only 3 GB of RAM (instead of 16 GB). If I try to create a domU with more than about 1.5 GB of RAM, the create fails with messages saying it "could not allocate memory for HVM guest". Here''s the output when I do

Hi! From other people posting to this list, I know that there has been a bug related to the issue described in Xen Security Advisory 36 that disables iommu for some AMD users like me. However, even when passing "iommu=no-amd-iommu-perdev-intremap" it still disables i/o virtualisatoin. Related Xen dmesg output: (XEN) IVHD Error: Invalid IO-APIC 0 (XEN) AMD-Vi: Error initialization

This is hvmloader part of the change that gets rid of the resource conflict warning in the guest kernel. The OpRegion may not always be page aligned. As a result one extra page is required to fully accommodate the OpRegion in that case. Just reserve one more page here. Signed-off-by: Timothy Guo <firemeteor@users.sourceforge.net> diff -r 11b4bc743b1f tools/firmware/hvmloader/e820.c ---

Hey I wanted to try my hand at doing some GPU passthrough so on my ASUS M5A97 which in the pass worked with an older BIOS (but said BIOS had issues after S3 suspend) - but with a BIOS the PCI passthrough does not work. That is due to:: (XEN) IVHD Error: Invalid IO-APIC 0xff (XEN) AMD-Vi: Error initialization

Hey, It looks like one of the patches that went in Xen 4.1 blows up. This used to work over the weekend, so I can only surmise it is one the three patches. This is with a debug=y build (which has been working nicely for the last month or more). It looks like one of the patches that went in Xen 4.1 blows up. This used to work a day ago - that is c/s 23551 worked nicely. ----- Forwarded message

Hi, I am having some issues with xen hypervisor crashing because it could not find one of the cores in my processor. This is not consistent. It happens once in every two or three boots. Is this is xen bug or is it something related to BIOS. If it is a xen bug, has it been addressed and could you point me to the right patch. Here is the xen boot message. title CentOS (2.6.18-274.7.1.el5xen)

Hi Konrad I encountered a bug when trying to bring offline a cpu then online it again in HVM. As I''m not very familiar with HVM stuffs I cannot come up with a quick fix. The HVM DomU is configured with 4 vcpus. After booting into command prompt, I do following operations. # echo 0 > /sys/devices/system/cpu/cpu3/online # echo 1 > /sys/devices/system/cpu/cpu3/online With

Package: xen-hypervisor-4.4-amd64 Version: 4.4.1-6 Severity: normal Dear Maintainer, I'm trying to boot into xen/dom0 but so far all attempts have resulted in a crash followed by an automatic reboot. My hardware is Motherboard: Asus Sabertooth 990FX R2.0 CPU: AMD FX-8350 GPU: Sapphire Radeon R9 285 A trace of the kernel panic follows (full log captured over serial should

On 04/02/2017 02:49 AM, Chris Elliott wrote: > Hi all > > I?ve got a few Intel Z87 chipset machines with Adaptec 5405 raid cards (latest firmware), they work fine on 3.18 but during Dom0 boot using kernel > 4.9.13 it hangs at ?Using clocksource tsc? and the aacraid driver keeps trying to reset > > Has anyone seen anything like this? > > I?ve tried specifying

On 04/03/2017 04:20 AM, George Dunlap wrote: > On Sun, Apr 2, 2017 at 9:22 PM, Sarah Newman <srn at prgmr.com> wrote: >> On 04/02/2017 02:49 AM, Chris Elliott wrote: >>> Hi all >>> >>> I?ve got a few Intel Z87 chipset machines with Adaptec 5405 raid cards (latest firmware), they work fine on 3.18 but during Dom0 boot using kernel >>> 4.9.13 it

Today is my day! This is with Xen 4.4 (pulled today) when I build a kernel in dom0 and have two guests launching at the same time. This is what I get: (XEN) Assertion ''l1e_get_pfn(MAPCACHE_L1ENT(hashent->idx)) == hashent->mfn'' failed at domain_page.c:203 and it blows up. Here is the full log: \ \/ /___ _ __ | || | | || | _ _ _ __ ___| |_ __ _| |__ | | ___