similar to: Windows 2008 R2 on KVM

After upgrading Win7 and W2K8 R2 clients to service pack 1 it is no longer possible to log in to domain(before the upgrade the clients can log in into domain). Clean installation of Win7/W2K8 R2 with integrated sp1 has the same effect. Our domain PDC is running on samba 3.3.7. I'm curious if anyone else has seen this already. Thank you Mikhail Zuskov

Hello all, I could use some advice on setting up this project. I have a small W2k8-R2 domain with a single DC. It runs great in spite of its age. However, the redundancy of the system is, of course, low. I was thinking of adding a 2nd DC. I can either get a cheap W2k8 license from amazon, or set up a samba DC. Running a "samba only" domain is not an option. Not my call.... When reading

Hi All, I am using CentOS 6.4 on 4 servers, guests are also CentOS 6.4 Network is setup using virtio, and vhost, this works well but sometime I see connection issue from application to DB. I found that sometimes latency increases from 0.200 ms approx to 123ms or even more sometimes, this happens only for 1-2 packets but keep happening after sometime. CPU load remains under 1, CPU usages is

Try: http://samba.bigbird.es/doku.php?id=samba:aditional-dc Regards, LP On 25 Sep 2024 at 20:19 +0200, Carlos Jesus via samba <samba at lists.samba.org>, wrote: > Hello all, > I could use some advice on setting up this project. > I have a small W2k8-R2 domain with a single DC. It runs great in spite of > its age. > However, the redundancy of the system is, of course, low.

Hello! We have a w2k8 R2 64-bit machine in a Samba 3.4.4 controlled domain. When logging in as a domain user there is a ~30 sec delay waiting for the User Profile Service. This has nothing to do with the size of the user profile. Looking at the network traffic I can see 2 gaps, the first about 11 sek and the second about 19 sek with no packets sent except one TCP ACK (from the client) in each

Hey guys! This is my first message to this list... I'm must say that I'm very impressed with Samba4! It is an amazing project! Nice job!! Last time I used Samba was back in 1998~2000... But, I got a new job that is forcing me to remove 3 Windows Servers with AD, by Samba4. So, I just deployed Samba4 on top of Ubuntu 14.04, it have Bind9, IPv6, a Secondary DC with replication, everything

James, I am running Windows 2008 R2 on Xen that is packaged with CentOS 5.4. I installed gplpv_Vista2008x64_0.11.0.238.msi using the falling steps: 1. Turn on testsigning 2. Reboot 3. Install gplpv_Vista2008x64_0.11.0.238.msi 4. Install process requests a reboot at the end. 5. At the end of the subsequent boot, there is a prompt for a reboot again. I

Hello Samba Team, Have a W2K8 not-R2 (NT6.0) server that compiles code served from a CentOS 5.6 server running Samba 3.5.5 over an Infiniband link. Works nice but an 'imake' step that grinds through every source file several times takes ten-to-twenty times longer than when it runs locally on the Linux side. It's apparent that the entire source tree is cached in memory by Linux, but

Hi, I am in the process of converting a w2k8 physical server to C6.5 kvm. In reading https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/V2V_Guide/sect-V2V_Guide-Configuration_Changes-Configuration_Changes_for_Windows_Virtual_Machines.html It says that virtio-win rpm is required. I know that the virtio-win rpms are not available for Centos 6.5 but the drivers are

Hi List. I have an old Compaq 3000 (Eaton 5119). It is running servers, disk-arrays, one workstation etc. I am planning to install NUT (master) on a headless CENTOS 6.8 system. Connect the UPS with seral cable. Now my main question is, Does NUT support the power segments on the UPS. My intention is to be able to take down the system in an ordered way before the batteries are exhausted. I.e 5 mins

Hi there! I will do soon the disk config, but first I will do some labs. I´m trying to install the virtio driver to comunicate using qemu-agent but when the driver is installed, the BSOD happens (win2k8 R2). I tried with virtio-drivers version 100, 110 and 117, both happens BSOD. Do you has a tip ? :) Thanks buddy! 2016-05-20 10:23 GMT-03:00 Dominique Ramaekers <

I am facing a problem with Apache on CentOS 6 Apache 2.2.19 is complied from source. I see so many reading requests in Apache status page, as per my previous experience this "reading request" issue mainly comes when any of the internet route having any problem and it request takes time to completely reach to Apache, but this time there is no network issue. I have ran same setup on

On 07/08/2020 22:44, Simon Matthews via samba wrote: > >>> >>>> >>> >>> This is where your problems start, you do not have enough lines, I >>> would expect something like this: >>> >>> ??? idmap config * : backend = tdb >>> ??? idmap config * : range = 100000-9999999 >>> ??? idmap config BLUE : backend = rid

With the current talk on bonding, I have a few questions of my own. I'm setting up a KVM host with CentOS 6.3 x86_64 on which I'd like to attach the VMs to a bonded interface. My target setup is one where two GigE NICs are bonded and then the KVM bridge interface is attached to the bonded interface. Initially I tried to use the balance-alb mode (mode6), but had little luck (receiving

Hi there! I have installed a new VM with Win2k8 and the serial virtio driver works fine. I don´t know why the other VM the BSOD happen! About the performance, I had the impression that only one core is used.....PID 8301 is a linux VM with 4 VCPU and 2 GB of RAM... ​ 2016-05-25 3:39 GMT-03:00 Dominique Ramaekers < dominique.ramaekers@cometal.be>: > > > *Van:* Thiago

Hi all, With the latest kvm updates, somebody have tried to install windows 2008 R2/windows 7 as a kvm guest using e1000 or virtio net driver?? Works with the windows installer?? Thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

Hi there! Although the guest has 2GB memory, the windows guest was adjusted to support this. I guess that the LVM is the best choice! I will save all images to other disk and re-build the partition with LVM. Do you recomend to use ext4 or zfs ? - About the apparmor, I have my doubts, I will try to disable and see what will happen! - About the tablet input device, I removed! Some forums say that

Hi there! Sure......see below. # virsh version Compiled against library: libvirt 1.3.1 Using library: libvirt 1.3.1 Using API: QEMU 1.3.1 Running hypervisor: QEMU 2.5.0 # uname -a Linux 4.4.0-22-generic #40-Ubuntu 16 <domain type='kvm' id='8'> <name>W2k8</name> <uuid>a148a0b7-eefb-9a5b-8e83-8efaf19f9899</uuid>

On 08/08/2020 19:43, Simon Matthews wrote: > On 8/8/20 12:21 AM, Rowland penny via samba wrote: >> On 07/08/2020 22:44, Simon Matthews via samba wrote: >>> >>>>> >>>>>> >>>>> >>>>> This is where your problems start, you do not have enough lines, I >>>>> would expect something like this:

I’m attempting to stand up a Windows 2008 R2 server as a domain controller to integrate with an existing Samba AD environment with 6x Samba AD servers (4.10.1) and multiple sites. This is the first Windows DC. I have a couple other Win2012 servers that are already domain joined, and ~ 300 Win 10 desktop/laptop hosts I’ve followed the guide on the wiki: