similar to: strange NAT issue?

Hi all my asterisk server, 2 sip client softphones are the same LAN asterisk ip address : 192.168.1.5 sip client 1 : 192.168.1.4 sip client 2 : 192.168.1.2 asterisk starts ok with sip setup the sip.conf [test] type=friend username=test secret=1000 host=dynamic context=cucku directmedia=yes directrtpsetup=yes [1000] type=friend username=1000 secret=1000 host=dynamic context=cucku

Hi, What does retransmitting NAT means? I have a client that uses SPA 942, and his phone sometimes cannot be called. i did a sip sebug and i keep on seeing retransmitting NAT. on the realtime it shows that it is registered, so when i try to call it , asterisk thinks it is still online so it tries to reach it instead of saying it's unavailable, [Oct 9 11:10:33] -- Called 103100 it

Hello all, I have a new Sipura SPA-2000 that I am trying to configure beind a NAT. The SPA is able to register to the asterisk server without a problem and the SPA can make calls to other extension that are not behind a NAT. However, when I try to call the SPA from another extension, the extension connected to the SPA rings, the user at the SPA answers, and there is no audio in either

I'm experiencing a problem with a Sipura SPA-941 not available for incoming calls after Asterisk & Freepbx upgrade. I can dial out with the phone gto any other internal or external ext. It is registered with the Asterisk server. When I dial the Sipura directly from any other extension, it goes directly to vm. I have other Sip softphones that are working fine. A sip debug when calling the

Hi, I have a little situation here :( Perhaps somebody can give me a hand with it. I have an Asterisk working, and in another office, a Sipura SPA-3000. I configured the SPA and I have the extension working, the incomming trunk working, but the outgoing trunk (peer) does not work. The issue is that I have a dynamic IP where the SPA is, and neither the SPA nor

Hi, I have a little situation here :( I have an Asterisk working, and in another office, a Sipura SPA-3000. I configured the SPA and I have the extension working, the incomming trunk working, but the outgoing trunk (peer) does not work. The issue is that I have a dynamic IP where the SPA is, and neither the SPA nor my router have DynamicDNS. So, if I

Dear all Lartc, I try to split my Internet access to my 2 ISP with 1 linux (GNU/Debian sarge) 3 NIC router, I want all my users conneted with ISP1 and just some IP connected with ISP2 Here is my configuration: Internal network: 10.117.71.0/24 Interface eth0 ISP1: IP for my linux box: 1.2.3.4/29 Interface: eth1 Gateway: 1.2.3.5 ISP2: IP for my

I have asterisk setup in my house and I have a SPA-3102-NA and a PAP2T. This is probably just me not understanding what is going on, but I was playing around last night and I used the sip unregister <extension> command on the CLI. I thought the boxes would re-register when their registration interval was up. This is not what is happening. Now the devices are failing to register, even my

I am trying to get a SPA-3000 to work behind NAT - for the sake of the exercice. The SPA is on the local network at the address 192.168.0.125 behind a NATted linux router. The machine I am trying to work with is a friend's (let's call it lolo.dyndns.org) and I've installed Asterisk 1.0.3 on it. I can see the SPA register but when I try to make an outbound call I get the message:

if i go off hook and dial 666 from an internal sipura spa-x000 (at extn 141), it rings straight through to extn 666. using the same dialplan, from a cisco 7960 with 7.1 sip code (at extn 142), i have to go off hook hit NewCall punch 142 (or any valid extn in the dialplan) hit Dial then dial 666 wtf? sip.conf for crisco [fiji] callerid="crisco" <142>

I've got a Sipura SPA-1001 that I'm trying to get working with an Asterisk server that's on the public Internet, while the SPA-1001 is behind NAT. I did the first obvious thing and mapped ports 5060 and 10000 - 30000 to the local IP address of the SPA-1001. Tried numerous proxy settings, have all the NAT settings == yes. Registration seems to be happening; with sip debug on, I see

Hello, this isn't an Asterisk specific problem but I don't know who else to ask for help. This is my setup, it oftens finds double NAT situations: [Asterisk box] <-> [Firewall IPCop] <-INTERNET-> [Random Router] <-> [Softphone] In certain situations, when two or more client softphones use the port 5060 at the same time and try to register, the UDP translation state of

I'm still unable to get my SPA-1001 to work behind NAT with an Asterisk box out on the Internet. It works fine to my local A@H box. I've tried... many things. I'm willing to pay a $250 bounty (PayPal preferred) to anyone who can help me get it working. Any Sipura experts out there? Eric.

Hi All, I have a asterisk box that is now on its own static address on the net.it was originally behind a nat firewall. The problem I have is that the remote SPA-2000's that are behind nat firewalls now fail. here is relevent sip.con entry [2001] type=friend username=2001 host=dynamic defaultip=81.178.77.67 allow=ulaw dtmfmode=rfc2833 mailbox=2001@local context=sip

Hello, i've recently configured my asterisk for internal sip calls. while testing, i noticed that 1 out of 10 calls works.. at first i thought my router dropping packets around the way as it were a bottle neck.. so i've added a switch. once i tested again same prob occurs... im using xlite as a softphone on clients pc and centos server on a dedicated machine. at times the phone call

I had a Grandstream 286 at my home hitting my Asterisk box at the office, all worked well and I received phone calls fine until the device just up and died. I replaced this unit with an SPA-2000 because I have been impressed with the Sipura devices and decided to use them for most of my needs in the future. Problem is that my phone attached to the device rings shortly after power up of the

Hi! Problem: I can't hear what the people at Location B i saying, they hear me but I do not hear them. They can call, I can call. Just no sound. My current setup is: Softphones/Hardphones(Location A) <-> Asterisk <-> Firewall/Nat <-> Internet <-> Firewall/Nat <-> Softphone/hardphone(Location B) I am having problems with sound, I have opened the

I've got someone sat in a home-office with an SPA921 behind NAT, and most probably a firewall. I've got a STUN-server running, and calling in from the SPA921 to our Asterisk box works fine - though I had to open the firewall for UDP traffic on port 10000-20000. Calling from our Asterisk to the SPA921 doesn't work. I'm guessing this is due to the NAT/firewall on the other side,

On Sat, Jun 18, 2011 at 6:40 AM, Larry Moore <lmoore at starwon.com.au> wrote: > On 18/06/2011 5:36 AM, Matteo Campana wrote: > >> >> Inviato da iPhone >> >> Il giorno 16/giu/2011, alle ore 16:37, Eric Wieling<EWieling at nyigc.com> >> ha scritto: >> >> We experience the same thing. The solution we use is to not change >>>

Hi folks. Please don't flame me but I've been googling around for days, read a tremendous amount, tried everything, and still no go. This is most definitely a typical newbie question. - I sure hope there's somebody(s) out there who'll humble themselves to help me out. I've set up an 'out of the box' basic Asterisk server running on Slackware Linux. - It basically