similar to: Xen 4.2.2 /etc/init.d/xendomains save and restore of domains does not work

Hi All, Everytime I upgrade to a new version of Xen (just did 4.2.1 this weekend) I find the xendomains script completely unusable. I use xl exclusively and the behaviour is slightly different to what the script appears to be expecting. Am I the only one that has this problem? I have an Ubuntu 12.04 based Xen server and a Scientific Linux 6.3 based server and both suffer the same problem. I am

Package: xen-utils-common Version: 4.4.1-5 Severity: important Dear Maintainer, I tried to upgrade xen-utils-4.4 depending on xen-utils-common. Here is aptitude answer: ... Param?trage de xen-utils-common (4.4.1-5) ... insserv: Service xenstored has to be enabled to start service xendomains insserv: Service xenconsoled has to be enabled to start service xendomains insserv: exiting now!

Hi, Ever since xl become the preferred toolstack, I have had problems using the xendomains startup/shutdown script. Having retested today, it seems that the issues are now reduced down to xendomains being unable to restart previously saved domains. Here is a typical session using xl running Xen 4.2.2 on Ubuntu 64 12.04 bit server, using stock Dom0 kernel (3.2.0-43-generic)

Hey, I thought there was supposed to be an ability for domU''s to be put into a hibernated state (E.g. current running tasks and memory) when dom0 is shutdown or rebooted. When I look in my /etc/default/xendomains file, I have the variable''s "XENDOMAINS_SAVE=/var/lib/xen/save" and "XENDOMAINS_RESTORE=true". However, when I reboot, I always have to restart my

Hi... I have had a problem when I am going to detach one specific LVM partitions of Xen, so I have been trying xm destroy <domain>, lvchange -an <lvm_partition>, lvremove -f.... So I haven''t had sucess. I restarted the server with init 1 yet and nothing... I have seem two specific process started xenwatch and xenbus, but I am not sure if this processes have some action over

As requested by Mark Williamson in BZ #681 Signed-off-by: Gawain Lynch <gawain.lynch@gmail.com> --- xendomains.orig 2006-06-17 14:35:48.000000000 +1000 +++ xendomains 2006-06-17 14:45:29.000000000 +1000 @@ -207,10 +207,11 @@ if [ "$XENDOMAINS_RESTORE" = "true" ] && contains_something "$XENDOMAINS_SAVE" then + XENDOMAINS_SAVED=`/bin/ls

Hello, i am using samba4rc2. I have problems with the bind9 dlz module, i get very long response times from interal queries. root at s-srv01:~# dig s-srv04.test.local @192.168.0.4 ; <<>> DiG 9.8.0-P4 <<>> s-srv04.test.local @192.168.0.4 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 64478 ;; flags: qr aa rd ra;

Hello, for everybody who develops or uses the script /etc/init.d/xendomains, there is a serious error in this script. If the given variable XEN_DOMAINS_AUTO_ONLY is set to true in /etc/sysconfig/xendomains, then the saving of the domains always fails - the domains are shut down instead of the saving. This is very bad especially for some HVM domains which MUST be saved instead of shut

Hello, for everybody who develops or uses the script /etc/init.d/xendomains, there is a serious error in this script. If the given variable XEN_DOMAINS_AUTO_ONLY is set to true in /etc/sysconfig/xendomains, then the saving of the domains always fails - the domains are shut down instead of the saving. This is very bad especially for some HVM domains which MUST be saved instead of shut

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi all, I wanted to set up my first (private) R-package and wondered if there was a function to prompt() for multiple aliases in one Rd-file, e.g. to create something like the normal distribution manual page encompassing rnorm, dnorm,... As I didn't find it, I modified prompt.default() and wrote a small function to do this job, called

Package: xen-utils-common Version: 3.0.3-0-2 Severity: normal xendomains saves the active domains when shutting down. it get the list of active domains from the following command[1]: xm list | grep -v '^Name' the output of "xm list" is like: lichen:~# xm list Name ID Mem(MiB) VCPUs State Time(s) Domain-0

During context switch is_running is set for the next vcpu before the gic state is actually saved. This leads to possible nasty races when interrupts need to be injected after is_running is set to the next vcpu but before the currently running gic state has been saved from the previous vcpu. Use current instead of is_running to check which one is the currently running vcpu: set_current is called

Is this a bug-- ------------------------------------------------------------------------------- <234>% R CMD Rd2dvi base.Rd Converting Rd files to LaTeX ... base.Rd Can't use an undefined value as filehandle reference at /opt/R-2.5.1/lib/R/share/perl/R/Rdconv.pm line 78. ENCS is Creating dvi output from LaTeX ... Saving output to 'base.dvi' ... cp: cannot access

Hi all, based on the information in the "Linux Advanced Routing & Traffic Control HOWTO", I was trying to set up traffic shaping on my firewall. While I found the HOWTO very useful, in the process I ran into some problems that I did not forsee: According to the HOWTO it seems that it should have worked, even after spending some time going through the sections looking for answers,

Hi there, anyone in the Gluster Devel list. Any fix about this issue? May 14 07:05:39 srv01 vms[9404]: [2023-05-14 10:05:39.618424 +0000] C [gf-io-uring.c:612:gf_io_uring_cq_process_some] (-->/lib/x86_64 -linux-gnu/libglusterfs.so.0(+0x849ae) [0x7fb4ebace9ae] -->/lib/x86_64-linux-gnu/libglusterfs.so.0(+0x8a2e5) [0x7fb4ebad42e5] -->/lib /x86_64-linux-gnu/libglusterfs.so.0(+0x8a1a5)

Hi I am testing running tinc in switch mode. , my topology is as follows Site 1 (tinc-srv01) -> Site 2 (tinc-srv02) I have configured the bridge interfaces with ip addresses and able to ping between bridges. I then setup a server on each site and tested layer 2 connectivity between the two servers. Topology as follows. Server 1 - *Site 1* (tinc-srv01) -> *Site 2* (tinc-srv02) - Server 2

The referenced GitHub issue now has a potential patch that could fix the problem, though it will need to be verified. Could you try to apply the patch and check if the problem persists ? On Mon, May 15, 2023 at 2:10?AM Gilberto Ferreira < gilberto.nunes32 at gmail.com> wrote: > Hi there, anyone in the Gluster Devel list. > > Any fix about this issue? > > May 14 07:05:39

Hi Xavi That's depend. Is it safe? I have this env production you know??? --- Gilberto Nunes Ferreira (47) 99676-7530 - Whatsapp / Telegram Em ter., 16 de mai. de 2023 ?s 07:45, Xavi Hernandez <jahernan at redhat.com> escreveu: > The referenced GitHub issue now has a potential patch that could fix the > problem, though it will need to be verified. Could you try to apply the

Hi Gilberto, On Tue, May 16, 2023 at 12:56?PM Gilberto Ferreira < gilberto.nunes32 at gmail.com> wrote: > Hi Xavi > That's depend. Is it safe? I have this env production you know??? > It should be safe, but I wouldn't test it on production. Can't you try it in any test environment before ? Xavi > > --- > Gilberto Nunes Ferreira > (47) 99676-7530 -

Ok. No problem. I can test it in a virtual environment. Send me the path. Oh but the way, I don't compile gluster from scratch. I was used the deb file from https://download.gluster.org/pub/gluster/glusterfs/LATEST/Debian/ --- Gilberto Nunes Ferreira (47) 99676-7530 - Whatsapp / Telegram Em ter., 16 de mai. de 2023 ?s 09:21, Xavi Hernandez <jahernan at redhat.com> escreveu: >