similar to: Asterisk / PHP-AGI / pthreads

Hi, I am trying to setup a GSM-Card for Asterisk. I currently use a "vgsm I" from voismart (http://www.voismart.it/) but the driver is very bad (compile-problems and no echo cancellation). Is there anybody out there who can recommend me another piece of hardware (pci card)? I need 1 or better 4 gsm-ports. Should be stable and have an echo cancelltaion feature. And of course it

Hello, Limiting the call duration with the L-option of the Dial()-command is working fine, however the announcement is not played. Dialplan : exten => _367,n,Set(LIMIT_PLAYAUDIO_CALLER=yes) exten => _367,n,Dial(SIP/test6,,L(11000,5000,5000)) The call lasts for 11 seconds, but 5 minutes before time runs out an announcement should come. I hear no announcement, not on caller-side nor on

Hi, I am wondering, if there is any tool available, which performs a check for suspicious entries in the dialplan. For example a non existing AGI-Script or a double assigned extension ike that: [context] exten => *100*,1,AGI(test_app.pl) ... exten => 190,1,Answer() ... exten => *100*,1,AGI(never_reached.pl) ... A "normal dialplan reload command" would echo no warning or

Hi, I am trying now for over 4 hours setting up cdr-logging via odbc into a mysql database. But with no success. Do you have any hint for me? cat /etc/odbc.ini ------------------ [MySQL-asterisk] Description = MySQL ODBC Driver Driver = MySQL Socket = /var/run/mysqld/mysqld.sock Server = localhost User = xxx Password = xxx Database = asterisk Option = 3 Port = and /etc/odbcinst.ini

Hi, I looked for asterisk in /usr/sbin using the commands ls and find and whereis and it was not there. I know that the process is killed because when I start asterisk using the command asterisk -vvvvc it starts and then it exits and the word killed is wrote on the console. Ever time I copy a new executable to /usr/sbin either using cp command or make install it gets deleted too. Now I used

Hi, I am using Asterisk 11.5.1. As far as I understood, the following configuration allows a sip client only to receive calls (type=peer) but not to place calls (http://www.voip-info.org/wiki/view/Asterisk+sip+type). Why can I place calls though with this config? sip.conf ... [thorsten] type=peer host=dynamic context=my_context nat=force_rport,comedia secret=... dtmfmode=rfc2833 disallow=all

Hi there, I am using Asterisk 11.9 (with Sangoma-E1-Card/DAHDI) and it works fine :-) But I am wondering if there is a solution/application which will enable me to implement voice recognition while playing a voice file (barge in). So that the caller hears a voice file and can interrupt it with his voice. Currently (on our platform) the caller has to wait for the end of the voicefie. Then we play

Hi, it's me again with a cdr-issue. I have the following example extensions.conf: # dial in exten => 100,1,Playback(hello) exten => 100,n,Dial(local/200,20,rtg) exten => 100,n,Playback(pleasewait) exten => 100,n,wait(10) exten => 100,n,Playback(goodbye) exten => 100,n,Hangup # for local dial exten => 200,1,Playback(hello) exten => 200,n,wait(10) exten =>

Hi. I just want to make sure I understand this before doing something that might break things spectacularly for our users and customers :) We are using Asterisk 1.6.2.9 and my programming language of choice is Perl. I want, when a call comes in on someone's DDI number (which the person who dialled it can only possibly have obtained by dialling 1471 after we called them), to be able to

Hi, since version 1.4.12 the libpri package supports ETSI Explicit Call Transfer feature: http://downloads.asterisk.org/pub/telephony/libpri/ChangeLog-1.4.12 Does anyone know, how to use this feature in the dialplan? I can not find any hints in the asterisk doc. Best regards, -Thorsten-

Hi, I use Asterisk 11.5.1 and it works fine. :) Now I want to use TLS and media encryption. I followed this guide: https://wiki.asterisk.org/wiki/display/AST/Secure+Calling+Tutorial When I place a call via Blink-Client (0.5.0) I get connected and Blink shows 2 locks. The blue lock shows "Signaling is encrypted using TLS" and the orange lock shows "Media is encrypted using

Hello, We would like to continue a Perl AGI after a Dial() it has done completes following caller hangup. We would like to do this in the same AGI, and not using a new AGI from the 'h' extension. It works fine when the called party hangs up and the 'g' option is used, but not for caller hangup. Is this possible? If not a confirmation that this is the case would be very helpful.

Hi Thank you for your support. The server is actually compromised, I discovered that after making a deep trace using the audit daemon and looking for the kill signal (SIGKILL) that terminates asterisk. I discovered that there is an executable with a random name in the /boot folder that is killing and deleting asterisk !!! This executable is launched by a service in /etc/rc.d/ with the same

Hi, I am using: Asterisk 11.2.0 libpri 1.4.12 Dahdi: 2.6.1 Sangoma E1-Card with Wanpipe-Drivers 3.5.28 I call my asterisk box via SIP and connect the call to an AGI-Script. Within the script I do EXEC SetCallerPres prohib or EXEC SetCallerPres prohib_not_screened But I get the following error: ast*CLI> == Using SIP RTP CoS mark 5 -- Executing [100 at sip:1]

Hi, I have the following setup: Ubuntu 12.04.02 LTS (64 bit) Asterisk 11.2.1 Sangoma 4-Port-Card (A104d) with firmware 43 (german e1-ports connected) WANPIPE Release: 3.5.28 DAHDI Version: 2.6.1 Echo Canceller: HWEC libpri version: 1.4.12 I call via sip into the dialplan. Then I do a "Dial(DAHDI/g1/voicenumber,r)". The call is bridged and everything is fine. "dahdi show

We have 2 PRI from AT&T And all is well but only few numbers having following issue. We are getting hangup cause 18 do you guys have any idea ? We have just migrate 1.2 to 1.8 and this issue raised [Jun 7 17:57:10] VERBOSE[23717] sig_pri.c: -- Span 2: Channel 0/3 got hangup request, cause 18 [Jun 7 17:57:10] DEBUG[24856] sig_pri.c: Not yet hungup... Calling hangup once with icause,

Dear All, I want to play music in my AGI while i am searching for a field in DB. Actually during some processes in AGI i need to play music . Thanks in advanced. Regards, Mehdi

Hi, I am running a service where I play full songs but MP3 files kept on crashing my server. I resorted to wav but the quality is really poor after converting..or even sometimes not audible at all! Do you guys know of a better way I can convert mp3 to wav and restore quality? Below is the script I am using, I also tried the steps at

Hi, I have Asterisk 11 with DAHDI (Sangoma E1-Card) running on Ubuntu 12.04 LTS. Asterisk and DAHDI-Drivers are installed from source. When doing an "apt-get upgrade" the system packages will be update but sometimes Asterisk is broken. Which packages do I have to exclude when I do not have time to recompile Asterisk/Dahdi each time? libc? Kernel-Packages? Thanks so far! -Thorsten-

Hi! I'm writing to this list because I've got a very confusing issue with our Asterisk 1.8.3.2 installation. On high IO load on the hard drives Asterisk becomes instable and crashes after a few minutes. I tried to reproduce this by running bonnie++ on the hardware while making calls. The calls didn't get disturbed (no noises or crackles) but after about five minutes Asterisk suddenly