similar to: Question on detect serial ports

guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg

I have been struggling with setting up two serial ports on an HP/Compaq D512S (Intel P4) under CentOS-5. I am not at all sure why these things were not auto-configured when I initially installed the CentOS system from CDs but they were not. I have found various resources on the web and from them uncovered the setserial utility. What I need from somebody is guidance on how to use this utility to

On Mon, Jan 29, 2018 at 07:00:02AM -0500, Pete Geenhuizen wrote: > > > On 01/28/18 20:15, Fred Smith wrote: > >On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: > >>I'm upgrading from CentOS6 to CentOS 7. > >> > >>I run 2 weather stations on C6 and have one of them attached to > >>ttyS0 which is on the motherboard, and the

On 01/28/18 20:15, Fred Smith wrote: > On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: >> I'm upgrading from CentOS6 to CentOS 7. >> >> I run 2 weather stations on C6 and have one of them attached to >> ttyS0 which is on the motherboard, and the other to ttyS2 which in >> on an add-on PCI serial card. >> >> I'm migrating the

The vm host shows this: # setserial -g /dev/ttyS* /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 /dev/ttyS1, UART: 16950/954, Port: 0xd040, IRQ: 17 /dev/ttyS2, UART: 16950/954, Port: 0xd048, IRQ: 17 /dev/ttyS3, UART: 16950/954, Port: 0xd050, IRQ: 17 # # ll /dev/ttyS* crw-rw----. 1 root dialout 4, 64 Nov 10 12:18 /dev/ttyS0 crw-rw----. 1 root dialout 4, 65 Nov 10 12:18 /dev/ttyS1 crw-rw----. 1

On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: > I'm upgrading from CentOS6 to CentOS 7. > > I run 2 weather stations on C6 and have one of them attached to > ttyS0 which is on the motherboard, and the other to ttyS2 which in > on an add-on PCI serial card. > > I'm migrating the weather stations another host running C7 which has > a similar

CentOS-6.2 We have a dedicated CentOS-5.7 host used for fax reception and transmission that we wish to move to a CentOS-6.2 virtual guest instance. The CentOS-6.2 virtual host has a 4-port serial card installed. lspci -v tshows this this: 03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford

I'm upgrading from CentOS6 to CentOS 7. I run 2 weather stations on C6 and have one of them attached to ttyS0 which is on the motherboard, and the other to ttyS2 which in on an add-on PCI serial card. I'm migrating the weather stations another host running C7 which has a similar hardware configuration.? When I connect the weather station to ttyS0 everything works fine, but when I try

I'm trying to get the Windows-software for my digital camera to work in wine under Mandrake 8.0 (kernel 2.4.3). Installed wine without errors. Had a look at the ~/.wine/config and it looked ok for me. The part concerning the serial ports: [serialports] "Com1" = "/dev/ttyS0" "Com2" = "/dev/ttyS1" "Com3" = "/dev/ttyS2" "Com4"

I installed a 2 port serial PCI card on a system running CentOS 4.3, but I can't get the additional serial ports to work. The card I used is from StarTech (http://www.startech.com/Product/ItemDetail.aspx? productid=PCI2S550&c=US). When it is detected by kudzu, it shows up as a "NetMos Technologies PCI 9835 Multi I/O Controller". I've included the output of

I am new to this mailing list. I apologize if any needed information is missing. I know this is a bit much to ask of wine's current serial port implementation, I am hoping someone has maybe figured this out already? Or can help me further the debugging process, I'd rather be part of the solution then simply another complaint about wine's serial port. ***** problem description

I am running Ubuntu 6.06 connected via serial port to an MGE Pulsar Ellipse 800VA. Have just installed NUT 2.0.3, and have problems with connectivity. This UPS was workign via serial connectivity to a BSD system only a few days ago. I have followed the instructions at http://opensource.mgeups.com/install/debian.htm The details... jason@ubuntu:~$ ls -la /dev/ttyS? crw-rw-rw- 1 root dialout 4,

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Is it possible to run wine with more than 4 serial ports? Looking through the source I seem to see a hard limit of MAX_PORTS=9, I would like something more on the order of 36 serial ports. I need to run multiple apps with a multi-port serial board, and I am hoping to do it though wine. When I try to set a com port of COM6 in my .wine/config file I get

Hi people. I'm trying to config a: MGE ELISE PREMIUM 1200 NT 02 Serial Nr. 92HE04008 With its serial cable into /dev/ttyS0. I had configured ups.conf, with no luck. Here is my ups.conf: [upscura] driver = mge-shut port = /dev/ttyS0 desc = "UPS" The permissions into /dev/ttyS?: crw------- 1 nut nut 4, 64 mar 8 18:43 /dev/ttyS0 crw------- 1 nut nut 4, 65 mar 8 18:42

I am in the process of migrating from running CentOS 4.8 (32-bit) to CentOS 5.4 (64-bit) on my AMD Sempron(tm) Processor LE-1300 system (it is running CentOS 4.8 32-bit because the disk images are from a previous PIII system), and things are 'interesting' WRT how the Lava Computer mfg Inc Quattro-PCI card is being handled. lspci (on CentOS 4.8 32-bit) yields: 01:0a.0 Serial controller:

Alle, After upgrading from 6.4 to 6.5, our serial console configuration non longer work. We have the following upstart file: [cwfox at hilo ~]$ cat /etc/init/ttyS0.conf # ttyS0 - agetty # # This service maintains a agetty on ttyS0. stop on runlevel [S016] start on runlevel [23] respawn exec agetty -h -L -w /dev/ttyS0 115200 vt100 [cwfox at hilo ~]$ And the following in /etc/securetty:

First, a little history; nut has been working on this system for about two years. It was a Fedora Core 2 (3?) system that I wiped and installed SUSE 10.1 on so I'm fairly confident of the hardware. I thought I'd saved the nut configuration details before I did the reinstall, but can't find them. (D'oh!) The UPS is an APC BackUPS Pro 420. The cable is a clone of the APC

Hello, I''ve got a problem to get a serial output on grub, xen, linux-xen0 and getty. The serial works fine with grub, xen and linux-xen0, but I''m unable to start a console, where I''m able to login. I dont''t get any output. If I change only the getty from ttyS0 to ttyS1 than I''m able to login.. At the attachment you can see what I see through a serial,

Hello, It is 3 or 4 weeks ago since, i want to set communication with my ups a MGE NOVA 1100 AVR. I do it first with manual configuration but after no success, i prefered to install mgeups-psp package to do it directly. But since when i execute psp, the attempt finish with an "No communication with UPS" error. Same is when i type: mge-shut -u root -DDDDDDDDDD /dev/ttyS0 . I unplog

The Startech.com pci2s550 can not be remapped to ports 1-4 before the system boots. The company is not supporting linux serial ports as consoles 0-3 , thank you starTech.com. ----- Original Message ---- From: n schembr <nschembr at yahoo.com> To: SYSLINUX at zytor.com Sent: Thursday, November 9, 2006 4:58:50 PM Subject: [syslinux] Serial with syslinux. Can syslinux be upgraded to support