similar to: libraw1394 and kino

Hi all! I'm trying to use my first-ever firewire device, and just OOB I'm not getting very far, so advice would be appreciated. When I plug in the device I see some entries in /var/log/messages: Jul 27 14:50:30 fcshome kernel: firewire_core: phy config: card 0, new root=ffc1, gap_count=5 Jul 27 14:50:31 fcshome kernel: firewire_core: created device fw1: GUID 0003f300118123f9, S100

Hello, Having a problem getting Centos to see my firewire connected camcorder. Here what I have thus far; Installed the kernek fron centos-plus and checked that libraw1394.x86_64 and libraw1394_8.x86_64 are installed Kernel i'm running is 2.6.9-34.106.unsupported here are some outputs from my machine; ~ $ lspci | grep -i firewire 00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE

I did yum update the other day and it downloaded and installed a bunch of stuff, including a kernel. Didn't have time to reboot until today. today when I reboot, I get a message something like this during boot (from memory since it doesn't seem to be saved in dmesg anywhere): CRITICAL unknown class console at line 23 in /etc/security/console.perms and when the system finishes booting,

Kino, a non-linear video editor for Linux, now exports in ogg theora format. I just posted a feature request at http://kino.schirmacher.de/ for a future version of Kino to edit video in native ogg theora format in addition to dv format. John

I did a check-out of vorbis trunk (revision 7445), but I'm getting problems with the autogen.sh. It complains that the required files vorbis{,enc,file}-uninstalled.pc.in are not present. $ ./autogen.sh checking for autoconf... checking for automake... checking for libtool... libtoolize I am going to run ./configure with no arguments - if you wish to pass any to it, please specify them on the

is rpmforge now considered 'friendly' with EPEL? I normally only use EPEL as an addition repo, but one package I want to install on this one system is ffmpeg, and I'm finding it on rpmforge only... but its install wants to mix epel and rpmforge packages... Installing: ffmpeg x86_64 0.6.5-1.el6.rf rpmforge 2.7 M Installing for dependencies: a52dec

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

Hi all, i need to use openbsd 3.9 as domU. So I downloaded an image and used my standard config file: kernel = "/boot/vmlinuz-2.6.16.18-xenU" memory = 128 name = "openbsd.3-9" disk = [''file:/xen/openbsd/disk,sda1,w''] root = "/dev/sda1 ro" but when I start the domU and attach the console I only see following lines befor it crashs. Any

I am transcoding mp3 to wave using ffmpeg I am then piping it to speexenc for speex encoding but the speex file size is 496 bytes after the command ends https://lists.ubuntu.com/archives/ubuntu-users/2010-March/212927.html https://lists.ubuntu.com/archives/ubuntu-users/2010-March/212949.html https://lists.ubuntu.com/archives/ubuntu-users/2010-March/212954.html what am I doing wrong? bellow is

Hello, I haven't installed anything other then what is in the Repos. Here are my Repo's: yum.repos.d $ cat atrpms.repo [atrpms] name= ATRPMS RPM Repository for Red Hat Enterprise Linux baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/stable gpgcheck=1 enabled=1 yum.repos.d $ cat CentOS-Base.repo # CentOS-Base.repo # # This file uses a new mirrorlist system developed by Lance

Hi everybody, I need help to install driver for video card. I have physically installed two video capture card on two different computers. Both running Linux CentOS release 4.4 (final), and kernel 2.6.9-42.0.3.ELsmp. The first computer is Pentium D 3.00 GHz, 1Gbyte RAM. The second computer is AMD Athlon 2800+, 1 Gbyte RAM. I succesfully installed opencv-0.9.7 on both computers with gtk+ 2.x,

Hey there, I'm trying to convert some call recordings from asterisk we have in .gsm format to something I can pipe through ffmpeg - wav would be good, mp3 would be amazing! I've been trying playing with sox but I don't seem to be getting too far with 1239101491.30.gsm -ql -r 64000 -t wav 1239101491.30.conv.wav resample as ffmpeg borks at it: tim at freee-meee:~/dmc/call

I've posted this question to the Gnome users list, but so far no luck, so I thought I'd mention this here. A little while ago, I noticed that I was no longer able to log out from my GDM. I'm running the default GDM (2.16) that comes with CentOS, and this problem started up right about the same time that I updated to the 53.1.4 kernel (from the 8.1.15 version). As I've posted

This package has a build requirement 'gecko-devel' which is fulfilled by 'xulrunner-devel'. But in the process of building the browser plugins two tools named 'xpidl' and 'xpt_link' are necessary. They werde once part of 'gecko-devel' but are now replaced by other tools. I haven't found any package that has these tools all the way back to 5.0. Maybe

Hi, and thank to you all for this great codec ! I have this bug on Debian Lenny with compiled packages of last svn versions of ffmpeg and libtheora. This seems to append only on the amd64 arch. Here is a valgrind log : pre-barreau at augustins:~/video$ export LD_LIBRARY_PATH=/usr/local/lib pre-barreau at augustins:~/video$ valgrind /home/pub/apps/ffmpeg_dev/ffmpeg_svn/ffmpeg -i

Error: mount.ocfs2: Transport endpoint is not connected while mounting /dev/sdc1 on /u02, could not mount /dev/sdc1. The installation step is: 1. install all rpms on int-rac1, int-rac2 2. interconnect int-rac1, int-rac2, ping each other using private ip and public ip ok. Add EMC SAN as shared disk and visable for two nodes. 3. configure int-rac1 using ocfs2console, add two nodes 4. according

I have a CentOS 6.3 machine I installed Asterisk 11, worked fine... I then tried to install on Cents 5.8, seemed to go fine... Then when I placed a call I got this: ast_rtp_instance_new: No RTP engine was found. Do you have one loaded? Did a search and found issues with ARM and this problem but did not help me, not using gtalk or anything. Just call between two polycom phones on local network.

Hi, I am currently doing logistic regression analyses and I am trying to get confidence intervals for my partial logistic regression coefficients. Supposing I am right in assuming that the formula to estimate a 95% CI for a log odds coefficient is the following: log odds - 1.96*SE to log odds + 1.96*SE then I am not getting the right CI. For instance, this is a summary of my model:

My first post.. I'm trying to run Flash Media Live Encoder 3 . - os: Ubuntu 8.10 (intrepid..) - wine: latest I'm also new to linux and have high hopes in wine :) The problem is: - Flash Media Encoder does not find any devices. I have a sony PD 170 DV camera attached with ieee1394 firewire. I don't know hot to make Wine "see it". Actually I don't even know

There are updates available, for the below multimedia packages (CentOS 5.5, 32 bit), but I'm getting missing dependency errors from yum update for these. ---> Package directfb.i386 0:1.2.10-1.el5.rf set to be updated ---> Package ffmpeg.i386 0:0.6.1-1.el5.rf set to be updated ---> Package ffmpeg-libpostproc.i386 0:0.6.1-1.el5.rf set to be updated ---> Package