similar to: H.323 Trunk between Asterisk 11 and Avaya

Hi List, I have another issue on allowing outgoing calls to PSTN on Asterisk via Avaya Phones, I hope that anyone could help me fix this issue: *When I dial through Avaya phone i just here a "good bye message" reply from asterisk server. And here is the log:* == Starting OOH323/(null)-b7db8aa0 at internal,s,1 failed so falling back to exten 's' == Starting

Has anyone tried using ooh323 in Asterisk to talk H.323 to an Avaya S8500 running Communications Manager 4 software? I have a potential customer who has such a system, and wants an Asterisk box to talk to it. Apparently they don't have SIP installed. I've successfully got ooh323 talking between two Asterisk boxes, so am just after some confidence regarding the Avaya, or any gotchas to be

Anyone have an H.323 trunk tied between their Avaya and Asterisk box that works? I am having some issues trying to get the two systems to connect. I am using the ooh323 channel to try to make the connection between the two system. I have all my configs if anyone would like to look over them. If I do a trace on Avaya I get a denial event 1191: Network Failure. Thanks! -------------- next part

hi sorry about the urgent but it is urgent i have problems configuring a connection between asterisk and avaya using H323. the module i am usign is ooh323 what do you need to help me? and any tip or hint? thanks!!! David -- (\__/) (='.'=)This is Bunny. Copy and paste bunny into your (")_(")signature to help him gain world domination. -------------- next part -------------- An

Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:7] Read("DAHDI/2-1", "PIN|enter-conf-pin-number||||") in new stack Jan 19 10:00:29 VERBOSE [7177] logger.c: -- <DAHDI/2-1> Playing 'enter-conf-pin-number' (language 'en') Jan 19 10:00:43 VERBOSE [7177] logger.c: -- User entered

Gentlemen, Forgive me if I am posting at the wrong place! I was going to test the "new" chan_ooh323 driver so I did install: debian: Linux sip2 2.6.26-2-686 #1 SMP dahdi-linux-complete-2.2.0.2+2.2.0 Asterisk SVN-trunk-r231692 Did enable chan_ooh323, everything compiled without any problems. Hardware setup: Phone (975) - Avaya CM - H.323 - Asterisk - X-Lite (0317998975) X-Lite can

Hi Gurus, We have configured asterisk to trunk with avaya with ooh323 channel driver. The sip phone registered on asterisk can dial the extensions registered on avaya via this trunk , and vice versa works too. Even we can make the avaya branch to dial asterisk?s extension and then this extension dial back to another avaya?s extension. But if we dial the external DID number via this trunk from

We're doing a project that requires H.323 to an Avaya. Does anyone have experience to share on which H.323 driver to use in asterisk 1.6? Is the diference between h323 and ooh323 still worth the extra effort? (We've only installed h323 under 1.4) If you have setup/config experience with this setup in Asterisk 1.6 please share! Thanks, MD -------------- next part -------------- An

Hi I've a softphone account to a AVAYA H.323 system, basically, it has a numeric ID (which is the extension number) and a numeric password. Instead of using the default AVAYA softphone (H.323), can I make asterisk as a H.323 client and login to the AVAYA system via any one of its h323 modules? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Just a warning to people trying to use ooh323 with Asterisk 1.8.7. The example config file that comes with asterisk is called chan_ooh323.conf when it actually should be named ooh323.conf for it to work. Sent me into a panic when I was trying to install an H323 link to an Avaya server and the ooh323 module would not load because it could not find its configuration file. The file needs to be

Hi everyone, I was wondering if anyone on this group has successfully integrated Avaya 8300 or 8700 and Asterisk using H.323 trunk and would be willing to share configurations and/or comment on the voice quality achieved. Currently we have Avaya 8300 integrated with Asterisk over a Q.SIG trunk, but we need to put Asterisk in a different geographical location from the PBX and need to explore

I have posted my problem on the link below, but didn't get any answer. I am hoping someone here can help me with this issue. Here's my problem: I am using H323 to talk between Asterisk and Avaya IP Office 500. For some strange reason, when we are talking on a VoIP call, we get disconnected after 10+ minutes. We have two other Elastix box, but none of them are getting disconnected. From

Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:7] Read("DAHDI/2-1", "PIN|enter-conf-pin-number||||") in new stack Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Playing 'enter-conf-pin-number' (language 'en') Jan 19 10:00:43 VERBOSE [7177] logger.c: -- USER ENTERED 'THE PIN NUMBER' Jan 19 10:00:43 VERBOSE [7177] logger.c: --

We've configured ooh323 on our 1.4.6 asterisk server. We've looked at various sites for tips, most recently http://www.tek-tips.com/viewthread.cfm?qid=1243330&page=3. The module seems to load properly. When we do a tcpdump, we see traffic flowing between the asterisk server and the Avaya communication manager. However, we're not geting phone calls connect. Since we do not manage

05.03.2015 11:42, Dmitry Melekhov ?????: > 05.03.2015 11:29, Dmitry Melekhov ?????: >> Hello! >> >> Just installed asterisk 13.2.0 and see many such messages in log, I >> see them in console during calls, really something like this: >> >> >> -- Executing [6166 at kanbaikal:2] Dial("OOH323/kanbaikal-6", >> "SIP/6166 at

05.03.2015 11:29, Dmitry Melekhov ?????: > Hello! > > Just installed asterisk 13.2.0 and see many such messages in log, I > see them in console during calls, really something like this: > > > -- Executing [6166 at kanbaikal:2] Dial("OOH323/kanbaikal-6", > "SIP/6166 at asterisk") in new stack > == Using SIP RTP TOS bits 184 > == Using SIP

On Thu, Mar 5, 2015 at 2:29 AM, Dmitry Melekhov <dm at belkam.com> wrote: > Hello! > > Just installed asterisk 13.2.0 and see many such messages in log, I see them > in console during calls, really something like this: > > > -- Executing [6166 at kanbaikal:2] Dial("OOH323/kanbaikal-6", > "SIP/6166 at asterisk") in new stack > == Using SIP

Hello, We want to make H323 calls between asterisk and avaya(lucent) pbx. We create node-name,H.323 signaling group,trunk, but we can not make H.323 calls to asterisk. Also no warnings exist in debug. Instead of giving the IP of Asterisk ,i give my computer's IP and run SJPhone ith H.323 GUI. In this time, connection is established. SJPhone accepts H323 calls but Asterisk does not. Do

Hello! Just installed asterisk 13.2.0 and see many such messages in log, I see them in console during calls, really something like this: -- Executing [6166 at kanbaikal:2] Dial("OOH323/kanbaikal-6", "SIP/6166 at asterisk") in new stack == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Called SIP/6166 at asterisk > 0x7fa9d4007660 --

I'm trying to connect an Asterisk system to an Avaya Partner ACS R6 system. The problem I'm having is that I cannot get the partner system to get CallerID over the T1 modlue. The partner is using the T1 with E & M signalling (which I don't think can be changed), and whatever I tried didn't work. My only option right now is to get FXS ports on the Avaya side plugged into the