similar to: v2.2.2 (e5bd0a7c6a1e) Core Dump

Looks like dsync v2.2.2 isn't fully compatible with earlier dsync versions, unless you add: http://hg.dovecot.org/dovecot-2.2/rev/e0156c479a12

Hi, I am going to try and study Dovecot with Director in v2.2.2, would like to confirm the Director bundled there is the latest version, as I saw #define DIRECTOR_VERSION_NAME "director" #define DIRECTOR_VERSION_MAJOR 1 #define DIRECTOR_VERSION_MINOR 3 in director.h thanks, - Joe

Hello!! I have a APC Back-UPS RS 800 and I'm using NUT v2.2.2 on a PowerPC powered NAS. With WinNut, I found the ups.load value strange, so I've done a "upsc ups" and got this results: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2007/12/28 battery.runtime: 997 battery.runtime.low: 120 battery.temperature:

Hi, I am attempting to compile samba version 2.2.2 on my solaris 8 server and I get the following error. Any help would be appreciated. Thanks. Linking shared library bin/smbwrapper.so ld: fatal: option -h and building a dynamic executable are incompatible ld: fatal: Flags processing errors make: *** [bin/smbwrapper.so] Error 1 **********************************************

Suppose this one breaks it: http://hg.dovecot.org/dovecot-2.2/rev/c4a85c9df948 ==> /var/log/mail.log <== Jun 1 14:01:30 spectre postfix/lmtp[456]: 3bN0qP5kwFzSy: to=<tlx at leuxner.net>, relay=spectre.leuxner.net[private/dovecot-lmtp], delay=1481, delays=1481/0/0.01/0.01, dsn=4.3.0, status=deferred (host spectre.leuxner.net[private/dovecot-lmtp] said: 451 4.3.0 <tlx at

==> /var/log/dovecot/dovecot.log <== Jun 9 09:58:26 spectre dovecot: lmtp: Fatal: master: service(lmtp): child 12635 killed with signal 11 (core dumped) This is another segmentation fault introduced in the current code. Please also look into fixing the other Core Dump I reported: http://www.dovecot.org/list/dovecot/2013-June/090795.html (gdb) bt full #0 0x00007f305d3df646 in

http://dovecot.org/releases/2.2/dovecot-2.2.2.tar.gz http://dovecot.org/releases/2.2/dovecot-2.2.2.tar.gz.sig It's been a while since v2.2.1. I think all of the bad bugs in v2.2 series should be fixed by now, so here's a new release. I think there are still some small URLAUTH bugs left though, so you might want to wait before enabling it in production (imap_urlauth_host is empty by

http://dovecot.org/releases/2.2/dovecot-2.2.2.tar.gz http://dovecot.org/releases/2.2/dovecot-2.2.2.tar.gz.sig It's been a while since v2.2.1. I think all of the bad bugs in v2.2 series should be fixed by now, so here's a new release. I think there are still some small URLAUTH bugs left though, so you might want to wait before enabling it in production (imap_urlauth_host is empty by

> > With todays nightly: > > > > dsync(wsunpriv at iai.uni-bonn.de): Panic: file imapc-list.c: line 199 (imapc_list_get_vname): assertion failed: (strncmp(prefix, storage_name, prefix_len) == 0 && storage_name[prefix_len] == list->sep) > > Oh, and this would be good to solve too. What does it say with gdb: > > gdb dsync core > fr 5 > p prefix >

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, using Dovecot v1.2 changeset: 9126:b745911012bb ACL config: acl = vfile # To let users LIST mailboxes shared by other users, Dovecot needs a # shared mailbox dictionary. For example: acl_shared_dict = file:/var/cache/dovecot/shared-mailboxes telnet localhost imap 0 login .... 1 getacl Sent * ACL "Sent"

Hi, In a routed network setup , is it possible to use ProxyARP given the condition that the shorewall external interface and the DMZ interface are in a completely different network . That means the gateway of the External interface and the hosts in ProxyARPed DMZ zones are in different network. eth0 ---in 220.227.X.Y/30 -- shorewall external interface eth1 ---in 220.227.A.B/27 -- shorewall

I've run into a problem with `doveadm backup` (2.2 rc2 and 20130226) I did not notice in 2.1.15 doveadm backup [-Dv] -R -u cyrtest1 at iai.uni-bonn.de -m INBOX imapc: => crashes (signal 6 with acl plugin configured, sig 11 without acl) If this is considered a bug (not just because of the crash but in the meaning of "my configuration should work") it would be great if it could be

Hi all, I'm having problems saving files from Office 2000 to any Samba share on our Slackware 7.1 box running Samba v2.2.2 When I go to File>Save As in Word, then select the mapped drive (samba share - drive X), I get this message: "The Folder 'X:\' isn't accessible. The folder may be located on an unavailable volume or protected with a password." I also have another

Hi, Back in 1997 the list was full of tips on making Microsoft Visual C++ Studio (v6) use files over Samba (v2.2.2 on Solaris). Could someone please point me to the definitive answers... (beyond speed.txt?) and their current status. We have an added complication of having 5 developers using each NT4 box over citrix/Terminalserver. Some days we are fine, but some days we slow to a crawl of over a

Hello everyone: Being a newbie, I'm extending myh education via trial and error. When I originally installed Red Hat Linux, I believe that Samba version 2.0.3-8 was installed. In fact, when I now query rpm for Samba, the response indicates the above mentioned version. A while back, I downloaded the latest version of Samba (2.2.2) and dutifully tried to install it. I issued the commands as

Fellows, As I recently told, we will change the development process to focus on the real changes, and not on backporting changes from one branch to another. We will gain a lot in terms of time between releases, and development efficiency. In this new process: - we will only work on the trunk for the day to day bugfixing and standard modifications (what was mostly happening in Testing currently),

Hi all, I am using chan_h323 from Asterisk CVS to interconnect with GNUGK v2.2.2. Then I made call from a H323 EP, thru GNUGK, to SIP EP on Asterisk. However, I only heard ringing when the call was answered on SIP side. Below is the debug from chan_h323. Any help is welcome. Thanks. *CLI> == New H.323 Connection created. -- Setting up Call -- Call token:

Hi, Am 24.01.2018 um 23:39 schrieb Josef 'Jeff' Sipek: > It looks like the binaries are stripped. There should be a "debug" package > you can install with symbol information. Then, the backtrace should be much > more helpful. I installed the debug package and the backtrace now is: --- snip --- (gdb) bt full #0 0x00007f73f1386495 in raise () from /lib64/libc.so.6 No

Hi all Firewall is Linux SLES8 kernel 2.4.21-278-default with 2 interfaces, fixed IP addresses on LAN and Internet (INT, WAN), NAT from LAN to INT (Masquerading-SNAT). Shorewall is v2.2.2. I am trying to allow access from LAN to Internet for all workstations EXCEPT for some of them. Default policy is REJECT LAN to INT traffic, so rule created in /etc/shorewall/rules is: ACCEPT

Hello, Dovecot keeps crashing at login time. Things were fine on 2.2.2 Fatal: master: service(imap): child 5014 killed with signal 11 Here is the trace: Core was generated by `imap'. Program terminated with signal 11, Segmentation fault. #0 0x00000000105cdfdf in mailbox_list_get_storage (list=0x7fffffffe310, vname=0x10a04ab0 "INBOX/spam", storage_r=0x7fffffffe308) at