similar to: Fiber or regular DSL Supported Gateways/PRI

Hello Everyone, We are looking to interconnect with a local ILEC over an OC-n transport layer. They basically gave us two options in terms of mapping the SONET to the DS3: * VT1.5s mapping * DS1s mapping The second option is quite clear. We would MUX the connection, and plug the lines into qaud t1 cads etc... The tech mentioned that with the second option we would also need a DACS to convert

Hello Everyone, We are currently having talks with various service providers, and trying to determine what the best way is to interconnect in order to have access to the PSTN network. As you know there are two ways of doing this: Traditional PRI: Have trunks grouped into a transport layer such as OC3/12. With DIDs attached to the group. As you many know, this approach would also require a POP

Please forgive the (almost?) OT post. (and the fact that I need a clue-bat) We've got a situation at one of our sites where a construction crew is likely to dig up our conduit which houses some data fiber and one pair of fiber used to tie a Definity 3gsi at a small office building to the rest of the phone system (school district). We're using a pair of Aeronets to the data network stays

Hello to all. I''m setting up a high capacity farm that''s going to allow many departments of a company or project have their own resources. I have little to no control over the brand of CPU (I would have much preferred AMD) and name brand of the gear, but I do get some input on what goes in each node. They are dell Power Edge 2950''s, found here :

Hey folks, I don't seem to be able to get a response from the openfiler forums (and they want 40 quid for the fine manual!), and since there has been a lot of chat about it here lately, I figured I'd ask here. Please forgive my terminology as I am just making my first baby steps into iSCSI and Fiber Channel, and am not very well read on the matters. So I could be using the wrong terms

Hi all, I've been googling for this for a day now and I can't seem to find a coherent structured way to build a fiber channel storage box where CentOS 6.7 is used both at the fiber channel target and initiator ends. My Brocade HBA:s are installed and the driver loads just fine in both boxes. Any ideas, pointers or URL:s are more than welcome. Thanks, Joacim

Hi, I'd like to use PSTN and analogic telephone with a Asterisk server which works on a LAN connected to the outside with fiber optic, on which voice stream passes too. Do I need some particular solution, some particular card to make it works or I just need a Digium or similar fxo card? Thanks, Bob __________________________________________________________________ Tiscali ADSL Senza Canone,

T1 PRI's are (almost?) always copper. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of dthurn@tstt.net.tt Sent: June 16, 2006 5:14 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] T1 Copper or T1 Fiber Line I am located in the Caribbean, we already have an Asterisk

I just followed the railscast http://asciicasts.com/episodes/266-http-streaming to have streaming. calling the http://localhost:3000/users ends up with following error: [INFO] NameError (uninitialized constant ActionView::StreamingTemplateRenderer::Fiber): [INFO] /home/kristian/projects/sandbox/rails3.1/rails3.1-test5/ target/rubygems/gems/actionpack-3.1.0.rc4/lib/action_view/renderer/

Hi, I'm looking information about using libvirt with san (fiber channel) based storage and googling for a while i don't see anything about it. I send this email in order to get advices about libvirt and shared storage We use here, for 3 years now, 8 linux centos server connected to an hitachi FC SAN (multipath devices). Each server run Xen dom0 and use SAN LUNs to store Virtual machine

CentOS 6 up-to-date 2.6.32-573.8.1.el6.x86_64 Gigabyte GA-Z68P-DS3 on-board audio BIOS disabled. Intel I5 Pny 550Ti video Envy 24HT pci audio module I want to use the fiber in/out of the audio card, but it is not listed in System/Preferences/Sound/Hardware, only the HDMI is available. It was installed in the pci slot when the system CentOS 6.0 was installed. I have searched all over Google,

Is anyone out there using Lucent brand equipment to handle an incomming DS3, converting all 672 calls to SIP (as G729) and sending those to Asterisk/SER over ethernet? If you are and are willing to speak to my boss about your experiences (over the phone) with it, please contact me off list. We have a possible contract with a local CLEC to handle their long distance, and they want to send to

Sorry for the off-topic, but perhaps this will be of interest to other asterisk based ITSPs. We are starting service in a rural area where the ILEC has the rural "monopoly". From what we have read in the FCC docs this does NOT exempt them from number portability, but what does it take for us to qualify to receive their numbers? To date we simply have a few voice trunks to them,

In reference to an old post from 2002: http://www.marko.net/asterisk/archives/0203/0103.html How does one go about doing this? Also, what is the present status of the OpenSS7 stack in Asterisk? What can it do now? And is there any possibility in the future of developing a DS3 card for it, if only for the purpose of mostly DACSing? Which is still a level of intelligent call control on the

different stand alone linux server which act as my routers. Here is a picture showing the output from the CISCO switch going to the two linux servers: http://www.grmtech.com/blog/wp-content/uploads/2009/02/cisco2950-24ports-farleft-two-output-300x89.jpg My questions are: 1. The black wire coming into the Mc Manstel box is that a fibre optic cable ? 2. What is the Mc Manstel box doing ? 3. What

Thanks a lot for help in advance. I am switching from matlab to R and I guess I need some time to get rolling. I was wondering why this code : > fit.0 <- lm( Response ~ 1, data = ds3) > step(fit.0,scope=list(upper=~.,lower=~1),data=ds3) Start: AIC= -32.66 Response ~ 1 Call: lm(formula = Response ~ 1, data = ds3) Coefficients: (Intercept) 1.301 is not working

Greetings!! We're getting some strange results using call files.. no matter the technology, DAHDI, SIP, etc., we get a "Call failed to go through, reason (3) Remote end Ringing" message when attempting to originate a call from a call file. Numbers changed to protect the innocent.... using call file.... //------------CALL FILE------------// Channel: DAHDI/g1/918005551212

BJ, >BJ Weschke <bweschke@gmail.com> >Subject: Re: [Asterisk-Users] Do Both! :) Re: Telecom >SIP termination vs. DS3 >To: Asterisk Users Mailing List - Non-Commercial >Discussion <asterisk-users@lists.digium.com> >Message-ID: <79cf63305051908056c284cc9@mail.gmail.com> >Content-Type: text/plain; charset=ISO-8859-1 >Did I miss pricing/availability

Message: 16 Date: Thu, 19 May 2005 00:16:34 -0600 Michael, Do both! As for Sip Termination: ----------------------- Contact Kristi Eggers @ Txlink.net for month to month Originating/Termination VoIP Toll Free or Local USA DID #s. Yes they do both Sip and IAX. You must have seperate accounts for either Sip or IAX and fund your account with a minimum of $100. This is what I did. Once I get

I need to setup incoming (over an 800 number and some local DID's) and outgoing phone calls (all over the country) with an Asterisk server. This asterisk server has 20 Polycom 430 phones connecting to it. I need the best possible SIP provider out there. I have tried http://www.nufone.net and http://www.broadvoice.com and they do not even come close to the expected quality. Does AT&T