Displaying 20 results from an estimated 100 matches similar to: "Adding arguments to the options"
2005 Nov 01
2
request: add TCP buffer options to rsync CLI?
Dear rsync folks,
I'd like to request/suggest that cli options to set TCP send/receive buffers
be added to rsync client-side.
Summary:
I'm aware that a daemon's config-file can set socket options for
the server side
(e.g. SO_SNDBUF, SO_RCVBUF). That is useful.
But when trying to get high-throughput rsync over
long paths (i.e. large bandwidth*delay product), since
2009 Oct 15
1
PATCH: --write-devices to allow synchronising to a block device
Hi List,
I had a need recently to efficiently synchronise between some large LUNs
(boot drive disks) at two different datacentres. Solutions like drbd and
$proprietary_array_vendors_software were overkill - we only needed
(wanted!) to periodically synchronise these LUNs whenever major changes
were generated on the source. On the other hand however, re-sending the
entire disk contents each time
2010 Jun 15
3
about rsyncing of block devices
Hiya,
I can see it's a regular subject on this list.
I, like others wanted to use rsync to synchronise two block
devices (as it happens one lvm volume and one nbd device served
by qemu-img on a remote host from a qcow2 disk image so that I
can keep the old versions)
As I couldn't find any report of it being done successfully,
I'm just sharing my findings as it might benefit others.
2005 Jan 27
1
Modifying SWAT views for general users
I'm looking at having my general Samba users change their own passwords on
my Linux server using SWAT. Is there a way that I can have them have
access to the password changing view and not be able to see the
configuration and status information. Is there an easy way for those
"button" to not appear on the web page?
Roy Costa
roycosta at us.ibm.com
2003 Jan 14
1
2.5.6pre1 bombs on Sunos4 in popthelp.c on use of sprintf
2.5.6pre1 bombs on Sunos4 gcc with these errors
popt/popthelp.c: In function `singleOptionDefaultValue':
popt/popthelp.c:137: invalid operands to binary +
popt/popthelp.c:141: invalid operands to binary +
popt/popthelp.c:145: invalid operands to binary +
popt/popthelp.c:149: invalid operands to binary +
because it's depending on sprintf to return the number of bytes
2002 May 04
1
A simpler move-files patch
In an effort to get my long-desired move-files functionality into rsync,
I have created a version of my patch that runs as an extra pass at the
end of the processing. This results in a simpler set of changes to
rsync.
I still think it would be nice to have incremental deletions during
large transfers (as my first patch provides), but acceptance of this
patch would relegate such quibbling to a
2016 Feb 04
0
Squid as interception HTTPS proxy under CentOS 7
check out sslbump documentation:
http://wiki.squid-cache.org/Features/SslBump
--
Eero
2016-02-04 15:24 GMT+02:00 C. L. Martinez <carlopmart at gmail.com>:
> Hi all,
>
> I am trying to configure squid as a interception HTTPS proxy under CentOS
> 7. At every https request, I am receiving a certificate error.
>
> My current config for squid is:
>
> # My localnet
2016 Feb 04
0
Squid as interception HTTPS proxy under CentOS 7
On 04/02/2016 13:24, C. L. Martinez wrote:
> Hi all,
>
> I am trying to configure squid as a interception HTTPS proxy under CentOS 7. At every https request, I am receiving a certificate error.
>
> My current config for squid is:
>
> # My localnet
> acl localnet src 172.22.55.0/28
> acl localnet src 172.22.58.0/29
>
> acl SSL_ports port 443
> acl Safe_ports
2018 Mar 09
3
SELinux breaks Squid's ssl_crtd helper
Hi,
I've setup a transparent HTTP+HTTPS proxy on my server running CentOS 7,
using Squid. Here's my configuration file.
--8<----------------------------------------------------------------
# /etc/squid/squid.conf
# D?finitions
acl localnet src 192.168.2.0/24
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port
2016 Feb 04
5
Squid as interception HTTPS proxy under CentOS 7
Hi all,
I am trying to configure squid as a interception HTTPS proxy under CentOS 7. At every https request, I am receiving a certificate error.
My current config for squid is:
# My localnet
acl localnet src 172.22.55.0/28
acl localnet src 172.22.58.0/29
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70
2018 Mar 11
2
Squid vs. iptables redirection: exception for certain domains ?
Hi,
I'm currently facing a quite tricky problem. Here goes.
I have setup Squid as a transparent HTTP+HTTPS proxy in my local
network. All web traffic gets handed over to Squid by an iptables script
on the server. Here's the relevant section in /etc/squid/squid.conf:
--8<-------------------------------------------------------------
# Ports du proxy
http_port 3130
http_port 3128
2023 May 17
1
[PATCH] Add --omit-{device,special}-times options
Similar to --omit-{dir,link}-times:
--omit-device-times omit device files from --times
--omit-special-times omit sockets and fifos from --times
Also, fix corner case that allows --omit-dir-times to be ignored. See
unchanged_attrs() and recv_generator()'s call to try_dests_non().
Marc.
diff -aNpRruz -X /etc/diff.excludes rsync-3.2.7/generator.c devel-3.2.7/generator.c
---
2007 Aug 21
1
DO NOT REPLY [Bug 4907] New: --disable-ipv6 disables -4 option
https://bugzilla.samba.org/show_bug.cgi?id=4907
Summary: --disable-ipv6 disables -4 option
Product: rsync
Version: 2.6.9
Platform: Other
OS/Version: Linux
Status: NEW
Severity: trivial
Priority: P3
Component: core
AssignedTo: wayned@samba.org
ReportedBy: safari-samba-bugzilla-
2008 Mar 11
1
[PATCH] Add --no-y.
---
When a bunch of --no-* options were added (852e763b), --no-y was
forgotten. Here it is.
Matt
options.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/options.c b/options.c
index 4ac8846..82597bf 100644
--- a/options.c
+++ b/options.c
@@ -577,6 +577,7 @@ static struct poptOption long_options[] = {
{"link-dest", 0, POPT_ARG_STRING, 0,
2019 Jun 26
2
Allow "--in-place" as an alternative option name for "--inplace"
Hi!
As I commonly spell --inplace as --in-place, I'd like to suggest this
simple patch:
commit 5689f99b702788044a45e13582559832cf986328
Author: Jan-Benedict Glaw <jbglaw at lug-owl.de>
Date: Wed Jun 26 22:49:31 2019 +0200
Allow "--in-place" as an alternative option name for "--inplace".
diff --git a/options.c b/options.c
index e5b0cb68..7ff0c51d 100644
---
2008 Mar 23
1
[PATCH] allow to change the block size used to handle sparse files
In some filesystems, typically optimized for large I/O throughputs (like
IBM GPFS, IBM SAN FS, or distributed filesystems in general) a lot of
lseek() operations can strongly impact on performances. In this cases it
can be helpful to enlarge the block size used to handle sparse files
directly from a command line parameter.
For example, using a sparse write size of 32KB, I've been able to
2004 Dec 06
1
port and double-colon
double-colon mode doesn't work in CVS version.
-vv says port number is 0.
% rsync -vv host.domain::any
opening tcp connection to host.domain port 0
rsync: failed to connect to host.domain: Can't assign requested address (49)
rsync error: error in socket IO (code 10) at clientserver.c(94)
And --port=873 cannot be used in client mode now.
I made a small sample patch.
(Sorry, I
2006 Jun 02
3
[PATCH] --omit-dir-changes, qsort<>mergesort issues
Hi all,
I recently ran into some problems with rsync. My plan is to renew some of
our old administration concepts from early 90's, I already replaced rdist
with rsync a few years ago.
Because of the rdist legacy, the current method requires synchronizing
files into 6 different locations, {/alt,/usr/alt}/{hostdep,sysdep,hutdep},
which in turn are prioritized by a tool that just symlinks
2009 Jan 24
2
[patch] Replace illegal characters in filenames for FAT (switch)
This patch adds a switch --fat-filenames which replaces all characters
that aren't legal on FAT filesystems with an underscore. This is the first
time I touch the rsync code, so I may not be going about it the right way,
but it seems to be working.
Naturally there's some potential for collisions, but it's probably better
than what happens currently (such files are simply not copied).
2020 Feb 06
0
[PATCH] Add support for zstd compression
From: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
zstd compression was announced as "good compression with high
throughput" so I gave it a try. With zlib, on high speed links the CPU
is usually the bottle neck. With zstd I'm able to fill a 200Mbit link :)
zstd detection happens automatically via pkg-config. No zstd header means
no error about missing zstd. So that