similar to: hardware error 0x80000021 on Ubuntu 12.10, need advice

Hi folks :), I migrated the host from the Debian Squeeze to Ubuntu 12.10. Old containers work but I can't use the ssh command, /dev/tty is missing. On a new container, /dev/tty is here. The libvirt configuration is the same. Any ideas? Thanks. -- Sebastien Douche <sdouche at gmail.com> Twitter: @sdouche / G+: +sdouche

Hi, after 2 years of "pure" LXC usage, I'm trying now to administrate our LXC containers with libvirt No problem with a LXC container I create "from Scratch" (lxc-create), but with our existing containers, I've a strange behavior with the console: vsonde43 login: Debian GNU/Linux 5.0 vsonde43 console vsonde43 login: Debian GNU/Linux 5.0 vsonde43 tty1 vsonde43 login:

Hello I have Debian Linux 2.6.32-5-xen-amd64 Xen 4.0.1, 2 SAS drives in RAID 1, 16GB ram. I have virtualized Windows 2003R2 32bit where you install the latest version 0.11.0.295 gplpv After reading and reading forums and post testing, I noticed that the hard disk performance drops significantly when I assign the windows domU 9GB ram. (below I leave the config files) If I run the

Hi all, I saw a quite surprising result in the devel R when using the function *normalizePath*. If the input is a path to a folder, the function returns an absolute path with/without a slash at the end depending on the existence of the folder. I know both results are valid on Windows but this behavior is different than R3.6, I do not know if the change in the devel version is made on purpose.

Hi, Does anybody know where I can get an untouched smb.conf file? When I used samba-swat, it rewrote smb.conf and deleted out the comments that was in the original file that came with samba. Minh --- samba-request@lists.samba.org wrote: > Send samba mailing list submissions to > samba@lists.samba.org > > To subscribe or unsubscribe via the World Wide Web, > visit >

Hi Jiefei, the change in handling trailing path separators is not on purpose, but is a byproduct of a new implementation of normalizePath, which now handles symbolic links and normalizes case in long path names. It is not documented what happens to trailing separators, and hence portable programs should not depend on it. I don't think it is a property that should be documented/specified.

Hi all, On the most libguestfs commands (guestfish, virt-*), I have always the same message: "febootstrap-supermin-helper: ext2: parent directory not found: /lib: File not found by ext2_lookup" I'm aware of a similar bug with the old package [1]: "Note on febootstrap (may not be directly related to this bug): You need 3.14 to work around that. I would recommend using at least

Hi, every so often (cannot determine when it occurs at this time), the VM remount in read only the host partition (/srv here). Is it a bug? A misconfiguration? My config: <filesystem type='mount' accessmode='passthrough'> <source dir='/srv/lxc/lib/vprobe10/rootfs'/> <target dir='/'/> </filesystem> -- Sebastien Douche

Hey, I just started noticing it today - with qemu-xen (tip is commit b97307ecaad98360f41ea36cd9674ef810c4f8cf xen_disk: mark ioreq as mapped before unmapping in error case) when I try to pass in a PCI device at bootup it blows up with: char device redirected to /dev/pts/2 (label serial0) qemu: hardware error: xen: failed to populate ram at 40050000 CPU #0: EAX=00000000 EBX=00000000

Hi, I am a libvirt user , there is a requirement about libvirt : I need a virsh cmd like "#virsh *create-as* --disk --net " to create a very sample guest I have not xml file and I think it's a little hard for me to create a NEW xml for libvirt , so I need a virsh cmd like "vol-create-as " help me do that. I know there are a lot of options for creating a guest , I just need

On Thu, Jun 07, 2012 at 02:49:14PM +0200, Sebastien Douche wrote: > On Ubuntu 12.04, I'm trying to create a second disk for a VM. The disk > seems work well (and mounted) but I don't like the cfdisk / fdisk > message. > > # virt-make-fs --partition --size=+300M --type=ext3 --format=qcow2 > srv-2912.tar.gz datadisk-test.qcow2 > Formatting 'datadisk-test.qcow2',

Hi I have asterisk 1.8.18 with freepbx 2.10.1.9. I get an asterisk crash occasionally with the followingerror. It always seems to happen while paging. 16 spa508g phones 1 snom pa1 paging amp Kelly == Extension Changed 1101[ext-paging] new state Idle for Notify User 101 pbx*CLI> *** glibc detected *** /usr/sbin/asterisk: malloc(): smallbin

Hi All: I have some questions when writing a lib with libsmbclient-dev ,my target environment is on any linux system. 1 I want to static link libsmbclient.a instead of using libsmbclient.so, but I got a lot of error , am I able to use libsmbclient-dev using static link? 2 I found that ?smbtree? command is more stable in finding all those domains and servers than

Hello, I am having trouble joining Samba to my ADS domain. I am using Samba 3 and krb5. I have configured and tested krb5 and know that it is functioning as it should be. I can successfully authenticate users using kinit. I've also configured winbindd. When I exicute net ads joing -U <admin username> and enter the proper password samba generates the following aborting the process at the

Hi! The linux.c32 module doesn't boot my kernel, while pxelinux itself does: kernel vmlinuz-2.6.23 append initrd=initrd.img-2.6.23 root=/dev/mapper/root works, while kernel linux.c32 append vmlinuz-2.6.23 initrd=initrd.img-2.6.23 root=/dev/mapper/root does not: it stays sitting after loading the initrd without any output. Version 3.50-pre2 worked, current git does not work.

Hi all, I'm new to samba : I've just installed it (version 4.0.5) on a 'fresh' Ubuntu 12.10 server (32 bit version), following the HOWTO we can find on the sambawiki. Everything is OK, up to the $ /usr/local/samba/bin/smbclient -L localhost -U% command (running as root) I get the following errors : NT_STATUS_CONNECTION_REFUSED, even if I replace % by Administrator... What am I

I have a Radeon HD 6670 GPU and an IOMMU enabled motherboard. With that GPU and motherboard, I had absolutely no trouble getting GPU passthrough to work with XCP 1.6 and a Windows 7 guest. It just worked! And after some trial and error (mostly error), I was able to get GPU passthrough working with XCP 1.6 and an Ubuntu 12.04 HVM guest. But with Ubuntu 12.10 and 13.04 HVM guests, I have had

I'm trying to build libvirt-sandbox under ubuntu 12.10 sudo apt-get install git build-essential lxc libvirt-bin libvirt-glib-1.0 libglib2.0-0 libglib2.0-dev gtk-doc-tools libxml2-dev libselinux-dev git clone git://libvirt.org/libvirt-sandbox.git cd libvirt-sandbox sudo ./autobuild The error I'm getting: make[2]: Entering directory `/home/user/libvirt-sandbox/build/bin' CC

Since upgrading to quantal, I find that synaptic and apt-get cannot read the sources.list file if it includes the previously standard line deb http://lib.stat.cmu.edu/R/CRAN/bin/linux/ubuntu/ quantal This line makes apt-get or synaptic give an error message identifying this line as having a syntax error. If "multiverse" is added at the end of the line, the line is parsed, but then

Dear friends, I followed the guide on http://techoctave.com/c7/posts/16-how-to-host-a-rails-app-with-phusion-passenger-for-nginx and successfully deployed two apps on the same web server, some months ago. Then when I upgraded to Rails 2.3.13.rc1 everything seems to be OK, but when I visit my app with the browser all that I get is the Welcome page from Nginx. Here is my nginx.conf: