similar to: compiz now (almost) works with intel i810 based cards

I am the tech guy for a local library. We have a network containing several diskless workstations. The hardware are these P4 boxes: http://www.geeks.com/details.asp?invtid=SAMBA845V-24-4-R&cat=SYS (We have inserted additional memory, bringing most of the machines up to 1.25Gig of memory, and two up to 2Gig of memory.) These little machines have integrated Intel video chips on their

I have an i810 chipset and am trying to set a custom mode. X is not taking that mode. Has anyone else run into this situation? How do I get X to take the mode on an i810 driver. Jerry

Hi there. Application is System Shock 2. Old game that uses DX6. It runs very slow in Wine on my hardware, however other native 3D applications runs just fine as well as some other windows apps via Wine (DeusEx). Here is what i get on console when running System Shock 2(It also freezies computer almost every time when it tries to switch to initialise 3D engine, it was hard to run it and exit

Hi there. The application is System Shock 2. Old game that uses DX6. It runs very slow in Wine on my hardware, however other native 3D applications runs just fine as well as some other windows apps via Wine (DeusEx). Here is what i get on console when running System Shock 2(It also freezies computer almost every time when it tries to switch to initialise 3D engine, it was hard to run it and

Hi all, I am running CentOS 7 on a NUC5CPYB. Intel video: 00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 35) When I take a screen shot I get "different" things. I use: export DISPLAY=:0.0 /usr/bin/xwd -silent -root -out screen; convert screen screen.png I tried import also for the screen

Hi list, This is my first post to this list so be kind... :) I installed CentOS 3.3 on a Dell Optiplex GX110 over the weekend and found that when I try to start X, I get a problem with loading the agpgart module which causes X to crash out. I did a little poking around Red Hat's bugzilla for RHEL3 and found the following bug: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=132935 You

A playback of a mono vorbis track on a system using the i810 audio driver via ogg123 results in a double speed playback (chipmunk sound). It seems that this chipset doesn't support mono and while xmms seems to compensate for it, ogg123 doesn't I have a bugzilla report at redhat.com filed on this with more details https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=90433 Regards, Yusuf

Hello, Not sure when it stopped working as I don't use it often. Maybe since the upgrade from 5.2 to 5.3. Can't say for sure as it's been a while since tried to start X. The errors I receive when startin X are: (EE) I810(0): unknown reason for exception (EE) I810(0): cannot continue (EE) I810(0): VBE initialization failed (EE) Screen(s) found but none have a usable configuration

There have been offered several patches in order to forward Xinerama support to Xgl and patches for compiz to make use of it (like iXce's ones, which were ignored). So far the patched up compiz is working pretty good and makes it effectively usable in such setups (aside of that those patches will always drift away from official CVS and need to be touched for each commit). However it seems

Cc: Daniel Vetter <daniel.vetter at ffwll.ch> Signed-off-by: Emil Velikov <emil.l.velikov at gmail.com> --- Daniel, Based on earlier chat that his file has never been used by userspace, should we just move it for internal usage (to include/drm) ? Regards, Emil --- include/uapi/drm/i810_drm.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/uapi/drm/i810_drm.h

I am attempting to setup a dell inspirons 1200 laptop media accelerator 900 from intel is the chipset so I am using the i810 driver. In the default 1024x768 everything is fine. I am trying to setup the external port not the LCD to be 1366x768. I added a modeline to xorg.conf of: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor"

Hi Everybody, I''m a using xen for my first time in a debian sarge using the testing repository of Xen. I have the following problem: When boot with kernel 2.6.11-ksxen0, after a day or some running, the X crash and then the machine reboots. Will it''s running i''m seeing this erros on dmesg: [drm:i830_wait_ring] *ERROR* space: 131056 wanted 131064 [drm:i830_wait_ring]

Hi, I am attempting to connect my dell SC420 to a 32" LCD at 1366x768. I have attached my currect config file and currect X start log. How do I massage the xorf file to run at the native resolution of the LCD? It currently runs but is in a virtual mode. The screen scrolls. Any help is appreciated. I am using Centos 4.1. Jerry -------------- next part -------------- An embedded and

Non-KMS drivers store state in struct drm_driver. This bloats the structure for KMS drivers and prevents it from being declared with 'static const' qualifiers. Moving the non-KMS state into a separate data structure resolves this. Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de> --- drivers/gpu/drm/drm_drv.c | 4 ++++ drivers/gpu/drm/i810/i810_drv.c | 4

Hi Folks, anyone out there successful in using the new xorg "intel" driver module on a 965Q-based motherboard with CentOS 5.2? The old "i810" and "vesa" work fine, I am looking for anyone else with experience with the new "intel" video driver in 5.2. The long of it: I have a customer's Dell Optiplex 745 (Core2 Duo 6300, 965Q chipset with integrated

On Tue, Feb 25, 2020 at 10:59 AM Thomas Zimmermann <tzimmermann at suse.de> wrote: > > Non-KMS drivers store state in struct drm_driver. This bloats the > structure for KMS drivers and prevents it from being declared with > 'static const' qualifiers. Moving the non-KMS state into a separate > data structure resolves this. > > Signed-off-by: Thomas Zimmermann

Hi All, I'm experiencing odd behaviour with various OpenGL apps I'm (trying to) use. I have an IBM Thinkpad X60s with the Intel GMA chipset, the 945GM to be precise. I have glxinfo/glxgears working normally, disabled composite in xorg.conf and everything seems fine. However, there are a few applications that I use that show rather strange behaviour that I think is related to the same

Package: xen-hypervisor-3.4-i386 Version: 3.4.3-1 Severity: important Dear Maintainer, I tried on 2 machines with ati's and intel's video card, both xservers fail to work. xserver works well with linux-image-2.6.32-5-xen-686(with out xen.gz) and linux-image-2.6.32-5-686. I also tried xen-hypervisor-4.0-i386, the problem is still there. Free fill to ask for more info.

This is completely offtopic, but well, I run the list so there :) Please respond directly to me and not to the list, though, to save the people who don't want to listen to this discussion. I am looking for a small PC with very specific criteria; these machines are going into an industrial setting (which I cannot explain in detail); I was hoping someone on this list might have experience with

On Sat, Oct 4, 2008 at 10:45 AM, laurent <lgautier at gmail.com> wrote: > > On Sat, 2008-10-04 at 12:00 +0200, r-devel-request at r-project.org wrote: >> Message: 18 >> Date: Fri, 3 Oct 2008 15:35:18 -0500 (CDT) >> From: Luke Tierney <luke at stat.uiowa.edu> >> Subject: Re: [Rd] Attributes of top level environments clobbered (was >> Re: [R]