similar to: patch: avoid segfault when using PRIO qdisc

Hello. Sorry for my poor english =) I have following config for traffic prioritization: tc qdisc add dev eth0 root handle 1: prio tc qdisc add dev eth0 parent 1:1 handle 10: tbf rate 7000kbit buffer 1600 latency 2msec tc qdisc add dev eth0 parent 1:2 handle 20: sfq tc qdisc add dev eth0 parent 1:3 handle 30: tbf rate 3000kbit buffer 1600 latency 50msec tc qdisc add dev eth1 root

Hi, I have done this setup to give the machine 192.168.1.4 (masqueraded over dialup) the highest priority: #! /bin/bash WHAT="add" iptables -A PREROUTING -i eth0 -s 192.168.1.1 -t mangle -j MARK --set-mark 1 iptables -A PREROUTING -i eth0 -s 192.168.1.4 -t mangle -j MARK --set-mark 4 tc qdisc $WHAT dev ppp0 root handle 1: prio bands 3 priomap 0 1 2 tc qdisc $WHAT dev ppp0 parent 1:1

Hi, this site: http://www.uow.edu.au/~andrewm/linux/ext3/ says "Forbidden" when I try to access .... , where can I download the ext3 patch for 2.4.15 ? Thank you Nikolai

Hello , I use kernel 2.4.7 patched with corresponding ext3 patch. The problem I have is that when I startup I get a panic in a kernel. I started to debug util-linux and found that mount does a segmentation fault when trying to open /etc/mtab file. The segmentation fault ocurrs on open() call inside mtab_is_writable() procedure: printf("mtab_writable: pass 1\n"); if (ret ==

Hello, I''m still new in using tc...I wanna ask... 1. what is the difference between classless and classful qdisc?? when I made a qdisc, are I must create both of that qdisc...??? 2. what is the difference beetween three of the classless qdisc in linux redhat 2.4, sfq pfifo and tbf if I using the htb classful qdisc ??? because when I use htb classful qdisc it means I made a qdisc that

Hi I have now my outgoing traffic shaped whith root qdisc htb (where i configure basic rate) and tc prio (as a leaf with 4 classes) where i can set priority of different kinds of traffic. It works but htb is work-conserving so packets are only delayed (when the rate is exceeded), while i want them dropped. In the case when rate is exceeded i want to drop packets with priority set to 4, then if

Hi, I had ext2 and 2.4.7 kernel , quotas were working ok. Now when all my filesystems are ext3 I figured out that quotas are not working.... if I do quotaon , repquota, quotacheck the programs return 0 without any output..... Does ext3 supports quotas? Nikolai

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sun, 20 Nov 2016, Nikolai Lusan wrote: > # grep -v '^ *\(#.*\)\?$' /etc/dovecot/ldap/maliuta.org-ldap.conf.ext > uris = ldap://localhost > dn = cn=admin,dc=maliuta,dc=org > dnpass = <secret> > tls = yes > tls_ca_cert_dir = /etc/ssl/certs > auth_bind = no > ldap_version = 3 > base = ou=mail,dc=mailuta,dc=org

Implement classless static routes support as specified in RFC3442. Bug-Debian: https://bugs.debian.org/884716 Bug-Ubuntu: https://launchpad.net/bugs/1526956 Signed-off-by: Benjamin Drung <benjamin.drung at profitbricks.com> --- usr/kinit/ipconfig/bootp_proto.c | 112 +++++++++++++++++++++++++++++++++++++++ usr/kinit/ipconfig/dhcp_proto.c | 1 + usr/kinit/ipconfig/main.c | 43

Commit-ID: ee59de58cd3ebe9e98d19aeaadb39915b0b235fc Gitweb: http://git.kernel.org/?p=libs/klibc/klibc.git;a=commit;h=ee59de58cd3ebe9e98d19aeaadb39915b0b235fc Author: Benjamin Drung <benjamin.drung at profitbricks.com> AuthorDate: Wed, 13 Dec 2017 23:04:29 +0100 Committer: Ben Hutchings <ben at decadent.org.uk> CommitDate: Wed, 2 Jan 2019 03:08:04 +0000 [klibc] ipconfig:

Implement classless static routes support as specified in RFC3442. Bug-Debian: https://bugs.debian.org/884716 Bug-Ubuntu: https://launchpad.net/bugs/1526956 Signed-off-by: Benjamin Drung <benjamin.drung at profitbricks.com> --- usr/kinit/ipconfig/bootp_proto.c | 110 +++++++++++++++++++++++++++++++ usr/kinit/ipconfig/dhcp_proto.c | 1 + usr/kinit/ipconfig/main.c | 50

Hi, I am setting up a dovecot instance to host a bunch of virtual domains, with ldap backing for auth. I am using a single hostname for test purposes, with a couple of entries in the diectory. If I use auth binds I get a result, but this does not suit the end purpose of the server. If I use ldapsearch with the same base, search filter, and credentials as the ldap auth config I get the correct

Implement classless static routes support as specified in RFC3442. Bug-Debian: https://bugs.debian.org/884716 Bug-Ubuntu: https://launchpad.net/bugs/1526956 Signed-off-by: Benjamin Drung <benjamin.drung at profitbricks.com> --- usr/kinit/ipconfig/bootp_proto.c | 109 +++++++++++++++++++++++++++++++ usr/kinit/ipconfig/dhcp_proto.c | 1 + usr/kinit/ipconfig/main.c | 54

I was using this setup and it worked fine untill i executed up2date in Redhat and updated a lot of the packages in linux. When i run the following script i get an error, which i pasted bellow. Script i run: iptables -t mangle -A FORWARD -s 171.100.20.110 -j MARK --set-mark 28 iptables -t mangle -A POSTROUTING -s ! 171.100.20.96/27 -d 171.100.20.110 -j MARK --set-mark 29

I''m trying to run wondershaper in my suse 9.1 box. However, I''m getting these errors: # /etc/init.d/wondershaper restart Shutting down wondershaper Starting wondershaper Cannot find device "root" Error: Qdisc "1:" is classless. Error: Qdisc "1:1" is classless. Error: Qdisc "1:1" is classless. Error: Qdisc "1:1" is classless.

<!doctype html> <html> <head> <meta charset="UTF-8"> </head> <body> <div> <br> </div> <blockquote type="cite"> <div> On 20 December 2018 at 14:10 Odhiambo Washington < <a href="mailto:odhiambo@gmail.com">odhiambo@gmail.com</a>> wrote: </div>

Hi to all! I''m studying qdisc prio but I have some problems. I want to create 3 queue (3 bands prio), each one associated to a workstation. I mark (with iptables) packets using workstation mac address and then send all packets in a particular queue. qdisc prio with handle 10: (default priomap) WS1 -> queue 10:1 WS2 -> queue 10:2 WS3 -> queue 10:3 I set it correctly (with

hello all, I was trying out the various queueing disciplines and i have problems with this basic one: Simple 3-bands Priority Scheduler --> sch_prio.c how i implemented it: #########START########## tc qdisc add dev eth1 root handle 1: prio tc filter add dev eth1 parent 1:0 prio 5 protocol ip u32 tc filter add dev eth1 parent 1:0 prio 5 protocol ip u32 tc filter add dev eth1 parent 1:0

Hi, I''m trying to set up 15 different delay intervals for packets leaving on an interface, using netems hanging off of a 16-band prio. I''m having trouble adding anything to bands higher than 10. Here''s what I tried: tc qdisc add dev eth0 root handle 1: prio bands 16 \ priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 I want all default traffic to go to

Hi, all I am interested in Linux related QoS, especially PRIO queue discipline (qdisc). I test some experiments about PRIO qdisc. Host A ------ Router A --- Router B --- Host C | 1Gbps | Host B ---------+ +-------- Host D flow 1 : Host A -> Host C (TCP) flow 2 : Host B -> Host D (UDP) priority 1 queue (pfifo, size 1000 packets ) : flow 1 priority 2