similar to: RTNETLINK answers: Invalid argument

Hello, I''m using tc to limit the bandwidth of our wireless customers. I have a working script, but I''m not happy with it. I''m trying to write a more sophisticated script, but when I run it, it give me this error: RTNETLINK answers: File exists I have no idea what this error means or how to fix it. Here is a portion of the script (the whole script shapes several

I am using a server with asterisk and I am trying to prioritize voip traffick -- I am a newbie at this traffic shaping, so please bear with me. I used the script below and what happens is thatall traffic in the bulk class stops after a couple of minutes. Also, should I include the ports for rtp in the filter statements with the ports 5061 and 4569? Note I have a fairly big pipe -- supposed to

Hi,All I am using iproute2 to manage bandwith for ADSL router.High,medium,low priority are needed for different protocol port on the ADSL's upstream side,as following: LAN --- |ADSL Router|------WAN When there aren't traffic on the specific priority, its bandwidth should be borrowed by other priorities.But it doesn't work.Here is my script: /usr/sbin/tc qdisc del dev nas0 root

Hi all, I''m having some problems setting up qdiscs on a bridge.The config looks a little like this: ifconfig ifb0 up # Bring up the IFB for this bridge. tc qdisc add dev eth2 ingress tc qdisc add dev eth3 ingress tc qdisc add dev ifb0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 cell 8 # Raw qdiscs on each bridge port tc qdisc add dev eth2 root handle 1:0 cbq bandwidth

Hi all. I fear I''m slightly offtopic with this question, but I''ll keep it short: who is (or feels) responsible for the #lartc irc-channel in oftc.net? I''d appreciate if that person would get in contact with me (off-list) in order to discuss some ideas I have. Thanks in advance. Bye, Mike _______________________________________________ LARTC mailing list /

Hey all, I had asked a question a little while ago about CPU usage being outrageous while using tc and a cbq qdisc. Ed was very kind and offered a few suggestions. One of these was to look at hashing. So after pounding away at it for about a week, I have a general understanding of how it works and have tried to implement it. Unfortunately, and quite obviously since I''m posting here, it

OK, finally I have made cbq run ! now I would like to know if it is posible to limit a range of IP to a speed. something like this : from 192.168.1.1 to 192.168.1.21 limit to 128K I don''t whant to limit each IP to 128K, what I would like to do is limit all 20 IP to have a max of 128K. Is it posible?

Hi All, I found 2 unusual behavior with u32 classifier in Kernel 2.4.12. I’ve u32 compiled as module. 1> u32 filter seems not working if there is already some fw filter used for some other class. In order to get u32 working I’ve to delete root class, which in terms delete all fw filters too, and then same command for u32 works. fw is also compiled as module. 2> If I add u32 filter to my

Hi All , My first message and I have a little problem with my FC6 box trying to block emule traffic using layer7 . Here my network : Internet --------- ADSL Router ------------------- FC6 Box -------------------- Emule Box external ADSL : Dynamic Internal ADSL : 192.168.254.1 external FC6 : 192.168.254.3 internal FC6 : 192.168.253.1 Emule Box : 192.168.253.3 I guess that everything

Hello, I have been working on tc class . But when the classid reaches 5 digit , it DOES NOT ACCEPT THAT ... see the example below :: tc class add dev eth0 parent 10:36 classid 10:13310 cbq bandwidth 10Mbit rate 32Kbit allot 1514 weight 3.2Kbit prio 5 maxburst 20 avpkt 1000 bounded See the bold digit !! this command doesn''t work , but if i use with 4 digit then it works : tc class

Message: 12 From: Gery Kahn <geryk@sphera.com> To: "''lartc@mailman.ds9a.nl''" <lartc@mailman.ds9a.nl> Date: Tue, 5 Jun 2001 20:28:30 +0200 Subject: [LARTC] priority of class ->split traffic in 2 more classes ->tc class add dev eth0 parent 2:0 classid 2:21 cbq avpkt 1000 bandwidth ->100Mbit \ ->rate 70Mbit prio 3 maxburst 20 ->tc qdisc add

Dear members I''m new to this list and also new to tc command. I have a subnet with over 30 pc which have ip addresses from 172.16.1.1/16 range.I want that each computer in my subnet can work with internet with maximum 6k for download and maximum 6k for upload.when i run the following tc commands from my bridge the first pc works well but the second pc can not work with 6k and it has an

hi all, Iam using the following CBQs to limit the FTP bandwidth pease tell what changes are rquired to make it work.... tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1:0 cbq allot 1514 avpkt 1000 bandwidth 100Mbit tc class add dev eth0 parent 1:0 classid 1:1 cbq allot 1514 bandwidth 100Mbit rate .4Mbit weight .4 prio 2 maxburst 20 cell 8 avpkt 1000 tc class add dev eth0

Hi folks. For quite a while, I tried to use linux (cbq and htb) to control bandwidth in order to replace a cisco equipment used to play this role on our network. After trying here and there, with a bunch of different distros, different versions, different compilations, ... the closest I could get was as follows: (using htb.init and cbq.init) Desired BW ==> Achieved BW 128k ==> 404.78

Hi Folks, I''m using a 2.4.x kernel and TC from the iproute2 package so that I can limit traffic through my gateway. I''m using this to mark packets when they leave the LAN: /sbin/ipchains -A forward -j MASQ -i eth0 -s 192.168.1.0/24 -d 0.0.0.0/0 -m 1 When the packets return, I need to have them marked again so that the ingress filter will limit the bandwidth in the opposite

The manual says (about prio): > Because it doesn''t actually shape, the same warning as for SFQ holds: > either use it only if your physical link is really full or wrap it > inside a classful qdisc that does shape. The latter holds for almost all > cable modems and DSL devices. I want to wrap prio inside of tbf. Here''s why: I have a server on a DSL line, which has

Hello, I am using the following commands to "throttle" the bandwidth of the NIC at eth0 : tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 10: cbq bandwidth 100mbit avpkt 1000 tc qdisc add dev eth0 root handle 10: htb tc class add dev eth0 parent 10: classid 10:1 cbq bandwidth 100mbit rate 128kbit allot 1514 maxburst 20 avpkt 1000 bounded prio 3 tc class add

Hello there, I''m trying to do some prio qdisc, but it doesn''t seem to work. Can anybody tell me why ??? here is my simple prio qdisc script: OPTIONS="bandwidth 100mbit allot 1514 maxburst 20 prio 3 avpkt 1000" IPTABLES="/usr/local/bin/iptables.static" INTERNAL=eth0 EXTERNAL=eth1 tc qdisc del dev eth0 root 2>/dev/null tc qdisc add dev eth0 root handle

Good afternoon, I am a newbie to lartc. I have read the HOWTO. I set up a CBQ traffic control using the following commands, and it caused my VNC connection to break frequently. ======================================================================= **CBQ: cbq-1280.My_shaper /sbin/tc qdisc del dev lo root /sbin/tc qdisc add dev lo root handle 1 cbq bandwidth 20Mbps avpkt 1000 cell 8 /sbin/tc