similar to: Unknown filter "tcindex" ?

Hi i have configured my server with cbq and gred. The problem is that the cbq doesnt drop packets. The cbq is configured at a rate of 500Kbit "qdisc cbq 4: rate 500000bit (bounded,isolated) prio no-transmit Sent 100103048 bytes 73933 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 24000 undertime 0 " The traffic that being generated is more than 5Mbit with the

I want to set the DSCP field of the incoming packets. And then put them in the correct queues. I can mark the packets: iptables -A OUTPUT -t mangle -d 10.10.10.12 -j MARK --set-mark 1 tc qdisc add dev eth0 handle 1:0 dsmark indices 64 set_tc_index tc class change dev eth0 classid 1:1 dsmark mask 0x3 value 0xb8 tc filter add dev eth0 parent 1:1 protocol ip prio 1 handle 1 fw

I ''ve been trynig for a long time now to make HTB and GRED to work togethen. The problem beeing that GRED doesn''t use handles (instead it uses DP:1 DP:2 etc) i can not preperly filter traffic to them. Tomas Graf suggested to use the tc_index index of u32 classifier so dear Sant .. i am currently with the following scripts that works! But when i try to add an HTB before the

Hi all, I have installed 2.4.5 kernel, Debian Potato. my tc script: #!/bin/bash tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 echo root tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate \ 10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate \ 5Mbit allot

Hi, I want to setup core routers to do both DSCP marking and to get the DSCP and forward packets based on DS field. I don''t want to separate DSCP marking to be done only at the edge routers. I know that dsmark is both used for DSCP marking and for getting the DSCP and forwarding packets according to DSCPs. In my case, since I want to do both of these I need two dsmarks.(?) I am not

Hello, I have the following proplem. My DiffServ configuration is working fine when I do ping, but when I use mgen the packets are not detected at the core router. Here is my core router configuration: #!/bin/bash tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev eth1 parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev eth1 parent

all: I"m just trying to create a simple rsvp session to familiarize myself with the protocol. I don''t ever get a rsvp RESV message only PATH AND PATH TEAR messages. There is a timeout but i''m not sure whats causing it exactly. Can anyone shed some light on why? All the configs and output are below. Please let me know if you need more information. Thanks. Jon Test

I am using a server with asterisk and I am trying to prioritize voip traffick -- I am a newbie at this traffic shaping, so please bear with me. I used the script below and what happens is thatall traffic in the bulk class stops after a couple of minutes. Also, should I include the ports for rtp in the filter statements with the ports 5061 and 4569? Note I have a fairly big pipe -- supposed to

Im experimenting with using a Linux machine with 3 interfaces to operate as a core router. All links and network interfaces are 100mbit. Below is a ascii diagram of the network. (network A) edge router ------>core router---->edge router (network C) ^ | | edge router (network B) I have tried two

Hi, I am trying to get assured forwarding/expedited forwarding with gred and htb working. Below is the script I am using. The following steps are what I thing is how the script works. My problem is that if I remove the HTB qdisc from the script and have the GREDS parent as the dsmark it works, but when I add the htb as a parent of GRED and DSmark the parent of htb it does not work? Any

Have a few generic questions about Kom-RSVP 1.) 11:00:05.175 WARNING: timer system overloaded, deviation is 30.080 sec - what timer is this referring to? System time? 2.) What is the relationship between the CBQ class created for RSVP traffic and the CBQ parameter that is in RSVP.conf? - ex. ### cbq qdisc ### tc qdisc add dev eth0 root handle 1: cbq bandwidth 10mbit avpkt 1000 mpu 64

Hi All, I found 2 unusual behavior with u32 classifier in Kernel 2.4.12. I’ve u32 compiled as module. 1> u32 filter seems not working if there is already some fw filter used for some other class. In order to get u32 working I’ve to delete root class, which in terms delete all fw filters too, and then same command for u32 works. fw is also compiled as module. 2> If I add u32 filter to my

Hi! I just recently entered the wonderful world of the so called "advanced routing" and decided to try and limit the bandwidth of a MASQed network here and ended up in trouble :(. The setup is (as far as I can tell) pretty straightforward. eth0 is connected to the "real" network with a proper IP, and eth2 is 192.168.10.x (the MASQed network). All of it is basicly right out of

Hello all, I am testing CBQ and HTB these days and I got a lots problem which needs your help. It is a little long text :) Thank you! (All my test is based on Redhat Linux9.0) 1.Is isolated of CBQ working? I have read Mr. stef word that he never made cbq isolated work. 2. I have setup an environment to test cbq: one tcp flow which I should protect and a noisy udp flow who will eat much of the

hey guys i am regulating the traffic to & fro by my network through a linux gateway , its behaving strange. i regulated Downlink to 2Mbps & UPlLINK to 500Kbps. both perform well when those are done independent i.e. one at a time but when i do both from a client system ..the downlink however continues at 2mbps but the uplink falls down to 100kbps? is something wrong with my script or

Hi,All I am using iproute2 to manage bandwith for ADSL router.High,medium,low priority are needed for different protocol port on the ADSL's upstream side,as following: LAN --- |ADSL Router|------WAN When there aren't traffic on the specific priority, its bandwidth should be borrowed by other priorities.But it doesn't work.Here is my script: /usr/sbin/tc qdisc del dev nas0 root

Hi all I am conducting the experiments comparing IP router forwarding delay and MPLS LSR forwarding delay, it is obvious in theory MPLS in Core should be faster than IP, but for small netork (only have several core routers), result show it is not, this is why I want emulate a large IP routing table in one core router. can I do it and how ? right now I use static routing table (by using command :

Hello, I have been working on tc class . But when the classid reaches 5 digit , it DOES NOT ACCEPT THAT ... see the example below :: tc class add dev eth0 parent 10:36 classid 10:13310 cbq bandwidth 10Mbit rate 32Kbit allot 1514 weight 3.2Kbit prio 5 maxburst 20 avpkt 1000 bounded See the bold digit !! this command doesn''t work , but if i use with 4 digit then it works : tc class

I need to shape traffic from some IP on one LAN, but I''m in trouble. There is a linux 2.4.26 connected to the Internet (eth0) / LAN(eth1) doing NAT. I''m using VLANs in the LAN Interface, that is connected to a 3Com SuperStack II in a 802.1Q tagged port. I want to create a class that will limit the traffic at 384Kbit/s. I want to create two leaf classes that limit the traffic at

Hi, I have a question about CBQ and wonder if I can make a class that are guaranteed 2Mbit but can borrow excess bandwith and only to specific rate. In my exampel below I want to guarantee the network x.x.x.x/y 2Mbit and they can borrow up to MAX 4Mbit. I have tried to create subclasses but it only works like bounded or not. # tc qdisc add dev eth0 root handle 10: cbq bandwidth 10Mbit avpkt