similar to: BandWidth Division

Hello, I''m trying to configure several wireless routers with QoS support. The idea is to implement differentiated services so that VoIP traffic gets the maximal priority, then video, control traffic, interactive data traffic and best-effort traffic. I have seen that CBQ used to be chosen as qdisc for implementing bandwith share in DiffServ but now HTB is preferred because it is

Hi, Is there any tested good HTB script for traffic shaping available like as that of CBQ available at. http://freshmeat.net/projects/cbq.init I am n new bie and need to work on htb. -- Regards, M Arman _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hi, i''ve following problem. One of our gateway router, which connects some of our customers should have bandwith limit. So customer A with IP XX should have 2 Mbit, customer B with IP YY should have 10 Mbit. There is no need of borrowing bandwith so no fairness needed. My simple question: with which technique should I manage this shaping? Or is there any existing project which

Hello Everyone, i''m having problem in limiting bandwith on my external interface in the server. i''m having a network here which is online via a linux server with cbq compiled in kernel. i''m having eth0 as internal network card, eth 1 as external network card my internet bandwith line is 8kbps on eth1 i want to limit this 8kbps to 4kbps at eth1 and no shaping on

For a root-qdisc, can the bandwidth be smaller than the bandwidth of the device？ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello, I''m Alexandra Well, i have been working with cbq around 3 month ago without any problems, what i do is control the bandwith to 64Kbit for input and output and it works well. But now I don''t want control the Bandwith, i only need prioritize udp trafic over tcp trafic Can somebody to help me with my requirement? Thanks Alexandra

Hi, I live in a rural community where adsl and cable is not widely available. I correctly have an option of using adsl or cable at my location. Ten miles away my friends apartment building has no option of cable or adsl. I set-up a wireless link between my friends apartment building and my house. It works great for him and me and the adsl company doesn''t care because they

Hello everyone, I''m a newbie experimenting with CBQ shaping and am facing a few problems. Can any of you please help? TEST SETUP: +---------------+ +----------------+ | 10.0.0.103 |----------->| 10.0.0.102 | +---------------+ +----------------+ 10.0.0.103: Linux, 100Mbit/s NIC 10.0.0.102: Windows, 100Mbit/s NIC, iperf tcp server (ports 2000 and 2001) WHAT I

Hello, I am running linux red hat 7.2 and still somewhat unfamiliar to its commands. I am administrator to an ISP with about 80 clients and would like to regulate the speed of uploads and downloads. I understand that I need to place everybody in different class''. Could I get help how to use tc/QBC to limit bandwith and impliment a u32 (or fwmark) filter that names mac

Hello, I have a serious problem with HTB which I wasn''t able to solve myself. I run a masquerading router with ppp0 as interface to the Internet. Three clients need to share a downstream of 1 MBit, which I want to divide with tc. When I see a packet being forwarded to one of these clients, I give it the appropriate unique mark: iptables -t mangle -A FORWARD -d 192.168.34.141 -j MARK

If I create a cbq qdisc as a leaf of a cbq class, the bandwith rate is the same of the root cbq qdisc or the rate of the cbq class? Does exist the parameter rate on the "tc qdisc add" for cbq command? tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 10mbit avpkt 1000 cell 8 tc class add dev eth0 parent 1:0 classid 1:3 cbq bandwidth 10mbit rate 50kbit allot 1514 cell 8

Hi Stef and Alexey I have read some documents about CBQ algorithm from http://www.icir.org/floyd/cbq.html but still have some question about CBQ in Linux . 1. First estimator can estimate how much bandwidth already USED per class. one estimating algorithm is EWMA (exponential weighted moving average), how about Linux implemenatation about estimator? also do you have link for this algorithm? I

Dear members I''m new to this list and also new to tc command. I have a subnet with over 30 pc which have ip addresses from 172.16.1.1/16 range.I want that each computer in my subnet can work with internet with maximum 6k for download and maximum 6k for upload.when i run the following tc commands from my bridge the first pc works well but the second pc can not work with 6k and it has an

Hi,All I am using iproute2 to manage bandwith for ADSL router.High,medium,low priority are needed for different protocol port on the ADSL's upstream side,as following: LAN --- |ADSL Router|------WAN When there aren't traffic on the specific priority, its bandwidth should be borrowed by other priorities.But it doesn't work.Here is my script: /usr/sbin/tc qdisc del dev nas0 root

Hello, My company runs several Internet Cafes in Mexico, where bandwith is limited and very costly. We use Linux to do NAT and firewall stuff and at each location we have about 30-40 stations. I''d like to know if anyone out there has any suggestions about how to use CBQ to limit the bandwith at each station. We only have a 128k circuit. The problem I am having is that since I have that

Hi 'tinc users' I'm new whit tinc and this mail-list. I like to build a vpn over the internet between two sites in Holland and Germany. Are there some experience whit the performance (turn-a-round en bandwidth) of a link. I want to use it for a 1,5Mb connection. Greetings, Fred Krom. - Tinc: Discussion list about the tinc VPN daemon Archive:

Hi, The CBQ config file shud be some thing like this. DEVICE=eth0,10Mbit,1Mbit RATE=50Kbit WEIGHT=5Kbit Shall i hardcode the DEVICE BW as 10/100 Mbit or Shall i use any other tool like ethtool for getting this. ethtool gives Speed: 10Mbps If so, how about, if i use some other Interfaces other than eth0, like ppp0 or some other? C''d anybody can give a suggestion over this? thanks

Hi all, I moved wshaper 1.1 cbq file to tcstart, but none of my tcrules are being observed. The only way I can set the marks is by editing the tcstart file. Is there a way to incorporate for tcstart to read and apply my set marks in tcrules? Thank you, ~Andrew Nady.

Hi, In my LAN Iam trying to make following setup: - All the traffic generated by 10.0.2.1 should go to 10.0.2.11, If the destination of this traffic is internet than it should be placed on its interface eth1. Outgoing traffic on eth1 should be shaped.For this I am using fw filters and cbq. _______ 10.0.2.1 -------> 10.0.2.11(eth0 )----| A