similar to: Prioritize SSH and telnet

Hi, I would like to prioritize VOIP traffic when we use the phone, but other times not do traffic shaping at all. Right now I have my openwrt router set up with htb to do shaping. In order to get it to work well I had to set my upload and download speeds much lower than my line speed. With these settings, I get good VOIP reception even while surfing the net and doing a long download. However,

Hello, is it possible that the number of bands for the PRIO qdisc is limited to 16? tc qdisc add dev $DEVICE root handle 1: prio bands 16 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 succeeds but tc qdisc add dev $DEVICE root handle 1: prio bands 17 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 returns: ''RTNETLINK answers: Invalid argument'' Is there any possibility to raise the

Hi, I have a server and ten clients in a Gigabit network. The server has 125mbps network bandwidth. I want that the server has 40Mbps bandwidth reserved for client 1 (IP 192.168.5.141), and the rest bandwidth is for all other clients. My script looks like this (I use IFB for incoming traffic): #!/bin/bash export TC="/sbin/tc" $TC qdisc add dev ifb0 root handle 1: htb default 30

Beta 1 is now available for testing. ---------------------------------------------------------------------------- I. P R O B L E M S C O R R E C T E D I N T H I S R E L E A S E ---------------------------------------------------------------------------- 1) Previously /var/log/shorewall*-init.log was created in the wrong Selinux context. The rpm''s have been modified to

Beta 1 is now available for testing. ---------------------------------------------------------------------------- I. P R O B L E M S C O R R E C T E D I N T H I S R E L E A S E ---------------------------------------------------------------------------- 1) Previously /var/log/shorewall*-init.log was created in the wrong Selinux context. The rpm''s have been modified to

Hi all, Here is something that i still haven''t understood. When installing PRIO, it creates 3 "classes" with priority level according to the TOS. That command line : # tc qdisc add dev eth0 root handle 1: prio give that result : # tc qd sh qdisc prio 1: dev eth0 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 How should i read that priomap, what does it mean and how to

IMHO, the priomap explanation in the 9.2.1.1. of the LARTC HOWTO is not clear enough. I only understood it''s real behavior until I read this document from Russell Stuart: http://ace-host.stuart.id.au/russell/files/tc/doc/tc/priority.txt So, based in this information, I''ve prepared an alternative priomap explanation for this section of the HOWTO, if you like it as it is I could

Could someone give me some help in prioritizing uploading traffic on my ADSL connection. Currently, I have set up a Linux 2.4.12 router/firewall/NAT to allow our network of users to access the Internet. --------- eth0 ---- Linux router/firewall/NAT --- eth1 ---- Local network a.b.c.d 192.168.1.254 I can''t seem to find enough information

Hi all, First, let me say I''ve been most impressed with how quickly and professionally people on this list ask and answer questions. Next, let me say that with which I need help is properly configuring strict PQ, and gathering certain stats. Specifically: - I need to create a priority queue with four queues (let''s say they are of high, medium, normal, and low priority) - I

hello to all i''m trying to set a filter but doesn''t want to work. i''ve set ut the qdiscs and the classes like this : tc qdisc add dev ppp0 root handle 1: htb default 20 tc class add dev ppp0 parent 1: classid 1:1 htb rate 120kbit tc class add dev ppp0 parent 1:1 classid 1:20 htb rate 30kbit ceil 120kbit tc class add dev ppp0 parent 1:1 classid 1:21 htb rate 30kbit ceil

I'm using RedHat 7.2 with kernel 2.4.18-26.7.xsmp and root mount using ext3. And I have simple test.pl script: #!/usr/local/bin/perl open FILE, ">testfile"; while(1){ print FILE "Test.\n" or die $!; } It's died when the file size is 2147483647 and give error message: "File size limit exceeded" and I run "cat testfile testfile >>

This is my first attempt at understanding lartc: I want to throttle outgoing bandwidth fo a certain tcp port and leave other traffic the way it was. so I put a prio qdisc at the root of eth0 (dummy priomap since i want to use filters to switch bands): $ tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 then attach a tbf qdisc at 1:2 : $ tc qdisc add dev

Hi, I am not sure if this problem has been discussed already. I am running red-hat LINUX 2.2.14 and the version of iproute that comes with it. The problem is that whatever I give as a command it tells me RTNETLINK answers : Invalid argument Example : tc qdisc add dev eth2 handle 10: root estimator 1sec 8sec prio bands 3 priomap 0 1 2 I have tried all kinds of combinations and it refuses to

Hi, I have done this setup to give the machine 192.168.1.4 (masqueraded over dialup) the highest priority: #! /bin/bash WHAT="add" iptables -A PREROUTING -i eth0 -s 192.168.1.1 -t mangle -j MARK --set-mark 1 iptables -A PREROUTING -i eth0 -s 192.168.1.4 -t mangle -j MARK --set-mark 4 tc qdisc $WHAT dev ppp0 root handle 1: prio bands 3 priomap 0 1 2 tc qdisc $WHAT dev ppp0 parent 1:1

Today I''ve noticed a bit strange (?) behaviour when prio qdisc is used. Example (having no filters/qdisc/etc. at the start) : Add simple 9 bands qdisc, set each mapping to lowest priority band: tc qdisc add dev $eth root handle 1: prio bands 9 priomap 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 If I do just that, all is fine - whole traffic ends in 9th band, what can easily be verified by tc -s

Hello everybody, sorry for bothering you, but after some hours, I''m stuck. I''m living in a student''s foundation where I want to connect lots of people to a tiny DSL link. We have exactly four types of traffic. We want a really hard PRIO solution (as I promised to someone that group X will only use the link capacity which isn''t used by group Y). I could make a

Hello I''m doing some qdisc programming and I want to get/read the current ingress rate from a kernel module I was wondering what is the most convenient of achieving this My idea is to load the ingress qdisc and the police filter if necessary. and modify the source to export a structure or function so I can read the ingress rate. How does this sound? Is there a simpler way? With

Hello, I've a problem known especially to german speaking users (and other nationalities using special characters). I'm using Samba 1.9.18 and a linux 2.0.35 kernel I want to create a directory or file with a name containing german umlaute from the win95 client so that I can see it on the linux machine with the equal characters I've used under win95. On the win95 machine the new

Hi, I''m trying to set up 15 different delay intervals for packets leaving on an interface, using netems hanging off of a 16-band prio. I''m having trouble adding anything to bands higher than 10. Here''s what I tried: tc qdisc add dev eth0 root handle 1: prio bands 16 \ priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 I want all default traffic to go to

OK - this is starting to get frustrating... Are there any known issues with 2.6.9 and traffic shaping? I am using 2.6.9 with geoip 20041115, and get odd oopses. The following script oopses my box: ----------------------------------------------------- #!/bin/sh -x IFOUT=''eth1'' IFIN=''eth0'' TC=''/sbin/tc''