similar to: load balance/redundancy

Hi, can anyone help me with this problem i''ve got! I have a problem with routing on my Mandrake 7.2 Linux Box i was wondering if you could help me with. I live in Australia and as broadband access isn''t very available at the moment, i have 2 modems to dialup to my isp (dynamic ips assigned) to increase my bandwidth at an affordable level. What currently happens is i have a

Hi. I''ve got here the following configuration: (turn on fixed pitch font to be able to see the scheme in a more accurately way) Client machines <-----> ADSL Router 1 <-----> INTERNET (192.168.0.0/24) (192.168.0.229) NAT Client machines <-----> ADSL Router 1 <-----> INTERNET (192.168.1.0/24) (192.168.1.229) NAT [if doesn''t really

Hi, I have a linux box connected to two leased lines as follows: _/\__/\_ / \ +--------+ +------------+ ( Internet )----+ Router | | SMTP server| \_ __ _/ +----+---+ +------+-----+ \/ \/ | 200.200.200.254 | 100.100.100.2\ -+-------+----- ... ---------+-- 100.100.100.1\ | 200.200.200.1 +-+--+--+ | Linux | +---+---+ _/\__/\_ 192.168.1.1 |

I''ve applied julian''s paches to a 2.6.14 gentoo kernel with the appropiate options enabled, and i''m using a modified version of the mpath2.sh script also available on julian''s site http://www.ssi.bg/~ja/ Overall everything works nearly perfectly. Incomming connections to either the fios (PPPoE) connection, or cable modem get routed back out correctly. The

I have two adsl lines on my linux firewall box and i want to do some load balance between them...i tried a lot of different things, but it isn´t working...Following the instructions of http://lartc.org/howto/lartc.rpdb.multiple-links.html i used the configuration above. using "iptraf" I can see some few packets using the ppp1 connection, but almost all the packets use ppp0 connection.

Hey, I''ve been scouring the web these past few days trying to find a suitable technique to load balance my network. Unfortunately I think my setup is very uncommon, so I''m looking to you guys to see if you can help. I currently have 2 ADSL modems, provided by the same ISP and terminating on the same gateway (I think having the same gateway is what is causing the problems, since

I have a private lan that is connected to the world via 3 dsl lines. I put up a linux box that handles all the dsl lines, lan gateway and all is working well...until...one of the dsl lines goes down. My routing table is: x.x.x.x dev ppp0 proto kernel scope link src x.x.x.x x.x.x.x dev ppp1 proto kernel scope link src x.x.x.x x.x.x.x dev ppp2 proto kernel scope link src x.x.x.x

Hello, lately I've been playing with the idea of doing in-place updates of systems using either rsync or xdelta. However, both rsync and xdelta seem to be dead set on writing a new file first, and then atomically exchanging it with the old file. Now, as I want to apply a binary delta to a full filesystem, bigger than the available temporary space, this really makes rsync and xdelta

Hello. I have the problem that I have two gateways on the same subnet, 80.237.244.1 and 80.237.244.33. Both gateways are 100 MBit cards, so I have 2 times 100 MBit to the Internet. The NIC in the server is a gigabit-card, so this card is easy able to use both gateways for outgoing traffic. Now I just want to use both gateways for my outgoing traffic but no matter what I do, it doesnt work. I

Hi to all i think this is not a new problem for this forum....but its newest for me as i m a new linux lerner. Even if it is new plzz....reply me ur answer..n if its already asked n have solution..plzz forward the solution. My problem is here mentioned: I have fedora core 4 as a linux server. there r two external links connected to this. the settings are as: eth0 ->for internal (that is

I have three ADSL lines that I''d like to use as one big pipe to the internet. The ADSL service works by establishing a pppoe connection (the ADSL "modem" is a bridge), and each pppoe interface gets its own IP address. This means I''d have to have 4 ethernet interfaces (3 for each of the ADSL modems and 1 for the LAN) in my gateway. I''d setup the gateway to NAT

& If can HOW ? thx

Hello everybody, I'd like to save/restore some partitions on my harddrive via rsync. (They happen to contain other os'es, so I can't safely mount the partitions read/write). So, I'd like to do something like rsync /dev/hda1 server::images/part_1.image -c -z -B65536 -S but: - "skipping non-regular file part_1" is misleading. Not the destination is not a file, the

is there a way to LOG & -j OTHER-TARGET packet with one rule, or i have to use two ? raptor _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello Shorewall list, I''m a happy Shorewall user since a few years now and everything works fine for me except one thing that I try to implement since a week, the multi-isp. I''ve downloaded the 2.4.0 Stable release yesterday and tried the RC2 since a week. My config is a Debian running a kernel 2.4.27 home made with the CONNMARK.diff patch applied I''m using 2 ISP,

Hi There, I am also trying to do the same for my network. I have two links from different ISPs and I want to configure a failover and load balancing Linux router. I am facing same problem here, that how to detect link failure and let Linux box switch the gateway. I know it works when the first gateway is physically down and not reachable. But what to do if my link is up but there is problem

Hi Ppl I have 5 adsl lines that after reading quite a bit i managed to get load balanced now abvoiusly it doesnt load balance evenly and this works on what routes are still in the routing cache. my question is my outbound masquerading had to be modified to use snat in iptables instead of just plain masquerading my outbound masquerading now works but my inbound port forwarding doesnt work would

Hi, my company have just bought new network and I have question about one problem. As in topic we must use few completely different dsl''s and balance traffic between them. 2M/0,5M 4Mb/0,5M 8M/0,5M M=Mb/s I''ve never done such thing before so I have doubts how it will work. If the links are symmetric 2/2 4/4 8/8 there is no problem because with weights I can compensate the

Hi all, I''m trying to set up a computer with 2 routes to the internet, much as described at http://lartc.org/howto/lartc.rpdb.multiple-links.html .One of my interfaces (eth5, 192.168.2.2) is only used for traffic originating inside the network. The other (eth1, 192.168.1.2) is only used for a VPN, where all (udp) traffic originates from outside our network. I have created a second

how to use iproute/iptables to balance by packet OUTBOUND traffic between 2 PPP (pptp cable modem and pppoe adsl modem) links to the same ISP . also by using the fact that the ISP dosen''t filter source IP address - meaning i can use either PPP''s link assigned IP address as the source IP in the ip header.., it works for both devices.., what i want to achive is : when uploading a