similar to: Bridge networking in Debian

Hi everybody, First of all, let me say that I searched a lot on the internet. I spent several hours sitting after my notebook, but I can't configure my network bridge in Ubuntu. I'm really desperate, so I hope somebody can point me out what I'm doing Hardware: ----------------------------------------------------------- $ lspci | grep controller 06:05.0 Network controller: Intel

Hi, I have a new xen hosting platform. I have given the bridge a static IP which I can ping/ssh to etc, when I create a new vm all works well apart from the networking. If I give DomU a static IP I can''t ping out from the box, Dom0 can''t ping the vm. I''m suspecting it just isn''t seeing the bridge but am unsure where to start looking. This is a very standard

I''m converting my network from a "one interface per segment" to a "single connection with vlans", well, some hardware I have requires using different vlan IDs. suffice it to say I need bridges to connect a few different vlans that should all be one but can''t be because of firmware constraints. so my first step is to get shorewall to know about bridges.

Hi folks, I''ve been trying to work out this situation for a few days now without much success and dug all over the archives for similar issues, none of which seem to relate exactly. I installed Debian Etch and the Xen (3.03) kernels / binaries on a Dell server. It works fantastic with all the default configurations with one strange flaw - as soon as the /etc/xen/scripts/network-bridge

Hello, I am facing some problems in bridged networking. I have successfully created a bridge br0 and added a virtual machine to it. Now the address of virtual machine is 10.1.3.31. I am able to connect to this virtual machine by another computer on same network. The virtual machine is hosting a simple python http server on port 8000, while some other service is running on port 80 When I try

Hi all, i have a xen 4.3 installation and would like to have a bridge bond szenario: *** eth0 eth1 | | bond0 | br0 | vif = [ ''bridge=br0,mac=xx:xx:xx:xx:xx:xx'' ] *** With the network script in debian wheezy *** /etc/network/interfaces auto bond0 iface bond0 inet manual slaves eth0 eth1

Hello guys, maybe you can help me with following issue. I have created a little cloud with a host and two worker nodes using opennebula. The setup went successfully until now, I am able to create VM's and move them via normal and live migration. Another (possibly) important information is that I configured my virtual bridge on both worker nodes like this: auto br0 iface br0 inet static

Dear All, I have the following configuration and I have ping from bridge : ///////////////////////////////////////////////////// iface eth0 inet static address 192.168.1.4 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 auto ivbr0 iface ivbr0 inet static address 192.168.1.4 netmask 255.255.255.0

Hi all, Has anyone managed to get CentOS 6 domU (i.e. guest) working on a Debian 6 do0? Both OS''s are 32bit and I''m running XEN 4.0.1 with HVM support. A CentOS 5.6 domU works fine on this very same server though. When I start CentOS 6, I get the following error: newusaxen:~# xm create -c /xen/genocide.cfg Using config file "/xen/genocide.cfg". xenconsole: Could

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Gao feng @ 12/12/2013 10:18 PM: > I saw there are two bridge br0 and virbr0 in your host. which > bridge the libvirt uses? what's result of #virsh net-list ? well i don't quite understand bridges and their function, i'm kinda just following directions. br0 replaced eth0 though in my interfaces file according to this guide[1] i

Greetings all. This has been an ongoing issue for me for a few months, and I''ve been trying to get an answer. My server has two NICs, and I want to set up the following: NICs (x2) -> bond (mode 5) -> Xen Bridge -> Doms ...however, trying to configure this doesn''t seem to work: network-bridge steals eth0 instead of bond0, which breaks the bond AND my networking. The

So Working on CEntOS 5 I am trying to sett up Xen with 2 bridges, one that connects dom0 and most of the domU to the physical card and the out to the network. Got that figured out no problem, now i want to have a second bridge that runs a local network for all the doms that doesn''t connect to the network. With code I have found used in multiple places I can easily get 2 bridges, and

When I add all interfaces, the internet does not work.... eth0 = interneteth1 = lan ------------------auto eth0 iface eth0 inet static address 192.168.1.254 netmask 255.255.255.0 broadcast 192.168.1.255 auto eth1 iface eth1 inet static address 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.254 auto xenbr0 iface xenbr0 inet static

Hello! I've faced a weird problem. And I totally can't understand how libvirt handles networks. The thing that i need to do is simple. I create a bridge in my ubuntu host, the following config: *iface eth0 inet manual* * * *auto br0* *iface br0 inet dhcp* * bridge_ports eth0* * bridge_stp on* * bridge_maxwait 0* That's OK, and my bridge turns up automatically. But I don't

Hi, I'm not in the list and I just would like to comment it to the comunity. So, if someone want to contact me, make CC to me in the reply. The wiki page [1] talk about networking, and show two typical configurations: "virtual network" and "shared physical device". The shared physical device has an error or something that could make confused, I think. What I want to

Hello!! I have some difficulties in my debian squeeze + xen 4.0. I had installed my domU windows XP today, and now it''s fails with some programs/applications. For example, my skype hangs when it starts with windows...i have a system in DOS (maybe in COBOL or CLIPER) running, but it is hanging too, and doesn''t starts...everything was working with VMware server, but now i change to

Hi all, I''m searching for a tutorial how to setup multiple network cards with xen network bridge setup in debian lenny. My problem is, bridges seams only to work if i put an ip adress in dom0 to them. Thanks, Alex _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I'm not sure but I think I suffer under the same problem with a bit different setup with squeeze testing and xen 4.0rc5. In fact I'm using bridges in the dom0 and the connections to the domU get lost sporadically. In don't see where's a solution to the problem... Is it now a bug? When it's an iptables bug, where's the corresponding bug in the iptables bugtracker

Hello, Despite of reading a lot of descriptions I don''t understand the network configuration. I simply have too little experience. I work remote with the machine via ssh. My dom0 is running. I copied an existing installation into a LV and created the following file: # cat /etc/xen/domu-sarge # -*- mode: python; -*- kernel = "/boot/vmlinuz-2.6.18-4-xen-686" #kernel =

Hi, I'm trying to build a bridge using a 486DX2/66 with two 10 Mbit Ethernet NICs. The machine (tsushima) is running Debian stable and kernel 2.4.26. Previously I used it as a router, so I know the hardware (NICs) is working. The NICs are as follows: eth0: WD80x3 at 0x280, 00 00 C0 0A 2C 2F WD8003-old, IRQ 10, shared memory at 0xd0000-0xd1fff. eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala