similar to: Centos6.4 cannot reboot

On 10/29/2016 10:12 PM, Hadi Motamedi wrote: > I am using a centos server for cdr billing and mediation device on a remote > network. I am experiencing problem that I am suspicious it comes from main > supply power cut at the remote site. The power supply to the remote site > comes from battery charger that will be automatically switched in circuit > under main supply power cut but

Thank you very much for your reply . So you mean under the /var/log/messages it is distinguishable that which logs come from operator initiated reboot and which ones come from sudden power cut and then booting from scratch when power resumed ? Am I correct ? On Sat, Oct 29, 2016 at 11:44 PM, John R Pierce <pierce at hogranch.com> wrote: > On 10/29/2016 10:12 PM, Hadi Motamedi wrote:

Hey guys, I tried installing the latest fuse on CentOS 7.1. I downloaded the latest version (2.9.4) from sourceforge and did a source install. After rebooting the host, now when I go modprobe fuse, this is what I get! *modprobe: ERROR: could not insert 'fuse': Unknown symbol in module, or unknown parameter (see dmesg)* If I tail dmseg this is all I see, but it doesn't seem

I have just installed (with kikstart) centOS6.4 on a PC which was previously running OpenSUSE (11.x). This PC has an apple keyboard and I'm unable to setup this keyboard. In .xsession-errors I get this messages : Error: No Symbols named "latin9" in the include file "macintosh_vndr/fr" Exiting Abandoning symbols file

Dear All, after updating to Centos6.4 via cr-repo, my laptop hangs on: starting crond : ok I booted in single user mode but I'm not sure what to change .... The laptop is an older MSI, hardware details attached. what could be the issue here? greetings, J. -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: jvermeulen.txt URL:

Package: logcheck Version: 1.3.13 Severity: minor Tags: patch Hi, Logcheck reports messages of the form: Mar 15 06:25:26 foohost rsyslogd: [origin software="rsyslogd" swVersion="5.7.6" x-pid="3301" x-info="http://www.rsyslog.com"] rsyslogd was HUPed I suggest the following tweak to /etc/logcheck/ignore.d.server/rsyslog: diff -u

Hi, How many user's you have assigned on that directory? --Regards Ashishkumar S. Yadav On Tue, Mar 24, 2015 at 5:30 AM, muiz <muiz at 163.com> wrote: > Hi, James, > The file system is xfs (/dev/mapper/centos-home xfs 1891292900 > 1556745108 334547792 83% /home) > > > Thanks and best regards, > Muiz > > At 2015-03-23 19:36:02, "James

Hi All, I bought a USB Bluetooth dongle. However, it's not working for me. Please help, how to debug and get more information as I can not see any error or warning message from system log message. I checked http://thread.gmane.org/gmane.linux.bluez.kernel/22183/focus=22211, however, also find another page

dear All, I'm facing this routing problem, the setup is actualy part of ltsp, but I think this problem is Centos-specific. The server is a Dell Poweredge R210. The install is standard 6.4, updated. I have one nic facing the public internet: vi /etc/sysconfig/network-scripts/ifcfg-em1 DEVICE=em1 BOOTPROTO=none HWADDR=d4:ae:52:c1:28:2b NM_CONTROLLED=no ONBOOT=yes TYPE=Ethernet

I am experiencing choppy sound when I bridge from a SIP peer to an IAX peer. I am running Asterisk 1.4.13 on a 2.6.22.9 kernel (Fedora). I am experiencing choppy sound from the SIP peer to the IAX peer but not vice-versa. I know that this is not a bandwidth issue because I don't have choppy sound (with the same codec) when bridging IAX->IAX peers or SIP->SIP peers. My timing source is

I understand that the Asterisk SLA implementation is somewhat different from most key systems and PBX systems. I also understand that in Asterisk, one does not put an SLA line on hold since it is just a MeetMe conference. However, is there any way to make the BLF flash when the answering party on the Asterisk system presses the hold key on their set and leaves the calling party alone in the

On 20.03.2015 02:14, muiz wrote: > Dear all, > > > I have a Centos 6 (64bit) server used for samba and ACL control. > There has a folder which a lot of user can access, when I add a new user's ACL, but failed, do you know how to resolve this problem? use xargs like in: |find . -name "*.pdf" -print0 | xargs -0 RUNACOMMAND robert | > > > [root at s1

centos 6.4, setup to be syslog server. Doing remote syslog using tcp works fine, so now want to add relp. I installed the rsyslog-relp package and told rsyslog.conf to use it: # RELP Syslog Server: $ModLoad imrelp # provides RELP syslog reception $InputRELPServerRun 20514 when I restart rsyslog I am told it does not like my InputRELPServerRun line: Oct 28 13:43:54 scan rsyslogd: [origin

I recently setup my Puppetmaster server to run through Passenger via Apache instead of on the default webrick web server. SELinux made that not work and I've found some documentation on making rules to allow it however mine won't load. This is the policy I found via this website, http://sandcat.nl/~stijn/2012/01/20/selinux-passenger-and-puppet-oh-my/comment-page-1/ . module

Does anybody know of any commercial providers of IAX termination with DIDs in the Seattle, WA area? I believe the area codes are: 425, 206, 253 Failing any commercial providers, is there anybody in the seattle area running Asterisk with a PRI coming in who might be willing to sell me an IAX trunk with a DID in Seattle? -- ____________________________________________________________ Muiz

I am using IAX soft clients (firefly, IAXComm, IAXPhone) from a Win2K machine on a NATed private LAN to connect to my IAXTel account. All of my calls to outside numbers(1-800, 1-877, etc) seem to be disconnected after 9 seconds. Has this limit been placed on IAXTel? My call to the echo test number at 1-700-999-9613 seemed to run for as long as I wanted. --

Hi, James, The file system is xfs (/dev/mapper/centos-home xfs 1891292900 1556745108 334547792 83% /home) Thanks and best regards, Muiz At 2015-03-23 19:36:02, "James Pearson" <james-p at moving-picture.com> wrote: >muiz wrote: >> Dear all, >> >> >> I have a Centos 6 (64bit) server used for samba and ACL control. >> There has a

muiz wrote: > Dear all, > > > I have a Centos 6 (64bit) server used for samba and ACL control. > There has a folder which a lot of user can access, when I add a new user's ACL, but failed, do you know how to resolve this problem? > > > [root at s1 abc]# getfacl /abc > # file: abc > # owner: root > # group: root > user::rwx > user:user01:--- >

On 3/19/2015 6:14 PM, muiz wrote: > I have a Centos 6 (64bit) server used for samba and ACL control. > There has a folder which a lot of user can access, when I add a new user's ACL, but failed, do you know how to resolve this problem? put all those users in a group, and delete all the user ACLs on that directory, just add the single group ACL -- john, recycling bits in santa

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 This message was incorrectly discarded by Mailman -- I''m still looking for the cause. - -Tom |On Mon, 08 Nov 2004 14:17:17 -0800 |> "Muiz Motani" <muiz@i-dist.com> wrote: |> | |>> > Has anybody found an elegant way to solve this problem? I am sure that I |>> > am not the only one who has run into