similar to: compiz --replace ccp & AND libIndirectGL.so.1- Conundrum

Listmates, There was no rhyme or reason why another /usr/lib/libIndirectGL.so.1 got installed on my system, but it did: [root Rankin-P35a/home/david] # l /usr/lib/libIn*? -rwxr-xr-x 1 root root 440676 2007-09-21 20:34 /usr/lib/libIndirectGL.so.1.2*? lrwxrwxrwx 1 root root 20 2007-10-12 03:00 /usr/lib/libIndirectGL.so.1.old -> libIndirectGL.so.1.2*? lrwxrwxrwx 1 root root 20

Listmates, I am experiencing some quirks with the new ATI 8.1 (8.452) driver and compiz-fusion on 10.3. Of note are: (1) Invoking the run command with Alt+F2 correctly opens the run dialog, but the cursor is frozen and will not take any input _until_ the "Options" button is clicked or activated with Alt+o. Then the cursor begins blinking normally and input is possible. If the

Listmates, I have a fresh openSuSE 10.3 install with all updates installed, the video card is a MSI nVidia 8600GT (pci-e 16). After following the openSuSE nVidia install and the Compiz Fusion install (and after log outs and reboots) compiz refused to start. As shown on the openSuSE Compiz page he file .config/compiz/compiz-manager was created with: COMPIZ_OPTIONS="--no-libgl-fallback

Devs, compiz listmates: Why can't I turn off compiz autostart on openSuSE 10.3 i386? Compiz just decided to start automatically with KDE login ever since I upgraded to the first 0.7.4.x release from the openSuSE build service. I have tried to disable it by creating the file "disable-compiz" in ~/.config/compiz but compiz still starts at login. Even if I switch to kwin before

Guys, SuSE 10.3, compiz-fusion-kde-0.6.2-3.1, fglrxG01-8.43.3-0.1, xorg 7.2. I just experienced a complete window decoration crash where all window decorations disappeared. kwin --replace followed by a emerald --replace cured the problem. This is the first crash since installing 6.2-3.1 about 12 hours ago. Is there anything helpful I can post that might identify the cause of the problem? --

Sam, Danny, J., all I am working with the radeon and radeonhd drivers seeing if I can get them to work with compiz 0.8.2.1 on my radeon x1200 laptop. My xorg .conf is: Section "Device" BoardName "RV350 NP" # Driver "radeon" Driver "radeonhd" Identifier "Device[0]" VendorName "ATI" EndSection I have tried

I have a feeling my no autostart problem is related to the following tests in compiz-manager. Is there a way I can "step" through the script on openSuSE 10.3 while it is running to find out where the script dies? Or do I basically have to insert error returns throughout the script to capture that info? ---- # if we run under Xgl, we can skip some tests here if ! check_xgl; then # if

Listmates (only posting to one list) Compiz has been running great with the 8.433 driver except for the libGL SONAME lockup on exit. see: https://bugzilla.novell.com/show_bug.cgi?id=344135 I just built and installed the 8.452 driver. Compiz would not start with the normal fusion-icon approach that I have been using with the 8.433 driver. This is on my Toshiba P35 laptop with an ATI

Listmates, Hopefully this is a compiz only question. Using the mouse wheel to scroll down web pages seems to be much slower in compiz than in kde. It also affects scrolling through long directories in konqueror (ex: /usr/share/doc/packages) but to a lesser extent than web content. Is there any setting, fix or workaround that might help? -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC

Listmates, No response from the suse list, so I am trying here. I bought a new HIS Radeon x1650 card for my daughter's computer, and I cannot get the card to work with compiz. I thought I knew the fglrx driver pretty well, but I am stumped here. The card has 512M of Ram and sits in the AGP slot of an MSI KM2M board running openSuSE 11.0/KDE 3.59 and compiz-0.7.6-16.1. All bios setting are

Listmates, I have a problem with compiz not honoring the special window settings in kde for xterm. In kde, I have the position and size of the xterm window set to a usable default. In KDE, the window opens to the proper size and location. In compiz, it is about 1/2 the size and never opens where it is set to open. Is there a way to have compiz read the default window settings for xterm?

Listmates, I have an interesting problem with compiz on openSuSE 10.3. On a 4 user system, compiz loads with a blank white desktop. The desktop begins to load and you can see the desktop background, then it goes completely blank white. The mouse cursor is visible, but nothing else. You can spin the cube, no caps are present, but the mouse is non responsive otherwise (no right-click response or

Listmates: For the past 1 or 2 compiz releases, for some reason it opens Yast software management full-screen with no window decorations in kde. kwin gives the normal windowed yast s/w management. Compiz also ignores the special windows settings in kde for this package. Is there anything I can check or tweak to correct this? Thanks. -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510

I see no problem with your nvidia temps But, i have seen this exact behavior when 'indirect rendering' is enabled. On Wed, Aug 19, 2009 at 2:00 PM, <compiz-request at lists.freedesktop.org>wrote: > Send compiz mailing list submissions to > compiz at lists.freedesktop.org > > To subscribe or unsubscribe via the World Wide Web, visit >

Listmates, I installed 8.2 on opensuse 10.3 from the opensuse XGL repository to replace 7.6. Compiz works with the nvidia 8600 GT card (512M of GDDR3) on the box, but the ctrl+alt <- -> switching behavior is really bad. In 7.6, the ctrl+alt <- -> desktop switching changed desktops crisply with just the slightest hint of the cube detected during the very short and nice switch.

Danny, Kristian, All, First let me tell you guys whatever you are doing with compiz, keep it up! It's looking great! I have a new error on ArchLinux when running compiz 0.8.2.1 that I have never seen before. I installed Archlinux on 2 boxes to check it out. One on a x86_64 box with the nvidia driver (no problems there) and one on an i686 box with onboard intel video. When connecting over

Listmates, Interesting difference in size. The cube now seems to have grown in size during rotate. See the differences: http://www.3111skyline.com/download/screenshot/compiz/compiz-rotate.png http://www.3111skyline.com/download/screenshot/compiz/compiz-rotate1.png Is there a setting that controls this? -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches,

Chinese Diplomat Step out to Expose Communist Regime at Sydney 6.4 Rally --- Chinese Communist Party is collapsing from Inside 2 million people quit CCP June 4, 2005 marks the 16th anniversary of Tiananmen Student Massacre. Australian Democrats, Greens representatives and human rights groups spoke at the Rally that intends to remember the pro-democracy students killed on Tiananmen Square and 80

Chen Yonglin: CCP Believes Australian Government Can Be Bought Jun 24, 2005 Picture:Chen Yonglin at the press conference on June 22, 2005 (The Epoch Times) When Chen Yonglin, the former Chinese Communist Party (CCP) diplomat seeking asylum in Australia, first announced his intention to defect, he told the world about the close relationship between

J, Danny, all: Compiz for openSuSE 11.0 from X11:/xgl has been fantastic and bullet-proof on KDE 3.5.9. The only issue I have encountered has been with the password management application keepassx, for openSuSE: 14:12 alchemy~> wp keepassx 6 results (3 packages) found for "keepassx" in openSUSE_110 * keepassx: KeePassX Cross Platform Password Manager - 0.3.3 [BS::home:/vinboy