similar to: howto: Option "FSAAScale" "0", why?

Listmates, Interesting difference in size. The cube now seems to have grown in size during rotate. See the differences: http://www.3111skyline.com/download/screenshot/compiz/compiz-rotate.png http://www.3111skyline.com/download/screenshot/compiz/compiz-rotate1.png Is there a setting that controls this? -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches,

Listmates, I have a fresh openSuSE 10.3 install with all updates installed, the video card is a MSI nVidia 8600GT (pci-e 16). After following the openSuSE nVidia install and the Compiz Fusion install (and after log outs and reboots) compiz refused to start. As shown on the openSuSE Compiz page he file .config/compiz/compiz-manager was created with: COMPIZ_OPTIONS="--no-libgl-fallback

Listmates, There was no rhyme or reason why another /usr/lib/libIndirectGL.so.1 got installed on my system, but it did: [root Rankin-P35a/home/david] # l /usr/lib/libIn*? -rwxr-xr-x 1 root root 440676 2007-09-21 20:34 /usr/lib/libIndirectGL.so.1.2*? lrwxrwxrwx 1 root root 20 2007-10-12 03:00 /usr/lib/libIndirectGL.so.1.old -> libIndirectGL.so.1.2*? lrwxrwxrwx 1 root root 20

List, In checking ring switcher and shift switcher, it seems that the key bindings are off. For shift switcher, it still initiates with <Shift><Super>S, but no longer terminates with enter on the numeric keypad, only the normal enter key terminates it. For ring switcher, it is NOT initiated with <Super>Tab despite the key binding showing that it is. Instead,

I have a feeling my no autostart problem is related to the following tests in compiz-manager. Is there a way I can "step" through the script on openSuSE 10.3 while it is running to find out where the script dies? Or do I basically have to insert error returns throughout the script to capture that info? ---- # if we run under Xgl, we can skip some tests here if ! check_xgl; then # if

Listmates, I am narrowing down the reason that compiz will not autostart on my Toshiba P35 laptop running openSuSE 10.3. There seems to be a mutual exclusion between being able to do manual start with "compiz --replace ccp &" and having compiz start at all with "libIndirectGL.so.1" present in /usr/lib. To get compiz to start on my system, I must manually rename the

Guys, SuSE 10.3, compiz-fusion-kde-0.6.2-3.1, fglrxG01-8.43.3-0.1, xorg 7.2. I just experienced a complete window decoration crash where all window decorations disappeared. kwin --replace followed by a emerald --replace cured the problem. This is the first crash since installing 6.2-3.1 about 12 hours ago. Is there anything helpful I can post that might identify the cause of the problem? --

Listmates, I have a problem with compiz not honoring the special window settings in kde for xterm. In kde, I have the position and size of the xterm window set to a usable default. In KDE, the window opens to the proper size and location. In compiz, it is about 1/2 the size and never opens where it is set to open. Is there a way to have compiz read the default window settings for xterm?

Listmates, Hopefully this is a compiz only question. Using the mouse wheel to scroll down web pages seems to be much slower in compiz than in kde. It also affects scrolling through long directories in konqueror (ex: /usr/share/doc/packages) but to a lesser extent than web content. Is there any setting, fix or workaround that might help? -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC

Sam, Danny, J., all I am working with the radeon and radeonhd drivers seeing if I can get them to work with compiz 0.8.2.1 on my radeon x1200 laptop. My xorg .conf is: Section "Device" BoardName "RV350 NP" # Driver "radeon" Driver "radeonhd" Identifier "Device[0]" VendorName "ATI" EndSection I have tried

Arjen, all I don't know if there is some prohibition against it, but the packages.html link for SuSE RPMs should be changed from: http://software.opensuse.org/ To something useful that will get the site visitors to the actual rpms. For the packages that were part of the distribution: http://download.opensuse.org/distribution/ or for updated packages on build service:

Arjen, I just installed openSuSE 11.1. I though it would be simple to setup the same CyberPower CP1000AVRLCD on the same machine that we worked through the 20+ voltage issue with, but usbhis-ups driver is failing for some reason. I have gotten the output I remember you needing from the last issue for you. What do you think the problem might be? Here is the information: First the logs from the

Danny, Kristian, All, First let me tell you guys whatever you are doing with compiz, keep it up! It's looking great! I have a new error on ArchLinux when running compiz 0.8.2.1 that I have never seen before. I installed Archlinux on 2 boxes to check it out. One on a x86_64 box with the nvidia driver (no problems there) and one on an i686 box with onboard intel video. When connecting over

Listmates, I have an interesting problem with compiz on openSuSE 10.3. On a 4 user system, compiz loads with a blank white desktop. The desktop begins to load and you can see the desktop background, then it goes completely blank white. The mouse cursor is visible, but nothing else. You can spin the cube, no caps are present, but the mouse is non responsive otherwise (no right-click response or

Devs, compiz listmates: Why can't I turn off compiz autostart on openSuSE 10.3 i386? Compiz just decided to start automatically with KDE login ever since I upgraded to the first 0.7.4.x release from the openSuSE build service. I have tried to disable it by creating the file "disable-compiz" in ~/.config/compiz but compiz still starts at login. Even if I switch to kwin before

Arjen, all, Just dropping a note on two points. First, Voltages are perfect in 2.4.1 for the Cyberpower ups's. Glad to see I'm not pushing 20+ any more: http://www.3111skyline.com/nut/ Second, even though the changes to where the monitor lines go in the configs and changes from ACCEPT, etc.. to LISTEN are fairly old now, the documentation for setting up monitoring for multiple UPSs

I see no problem with your nvidia temps But, i have seen this exact behavior when 'indirect rendering' is enabled. On Wed, Aug 19, 2009 at 2:00 PM, <compiz-request at lists.freedesktop.org>wrote: > Send compiz mailing list submissions to > compiz at lists.freedesktop.org > > To subscribe or unsubscribe via the World Wide Web, visit >

Nut Developers, I have unsuccessfully tried to solve a problem with the voltage value on my Cyber Power UPS CP1000AVRLCD. Something is wrong with the battery voltage calculation. It always reads around 20 volts with that's nuts (pardon the pun). Right now: battery.voltage : 20.3 You can take a look for yourself at http://www.3111skyline.com/nutindex.html Is there a parameter I can check

Listmates, I installed 8.2 on opensuse 10.3 from the opensuse XGL repository to replace 7.6. Compiz works with the nvidia 8600 GT card (512M of GDDR3) on the box, but the ctrl+alt <- -> switching behavior is really bad. In 7.6, the ctrl+alt <- -> desktop switching changed desktops crisply with just the slightest hint of the cube detected during the very short and nice switch.

Listmates, After wrangling with the voltage value on the CyberPower 1000AVRLCD and now having 2 of them working, I though it would be a simple matter to move my APC BP650 from apcupsd to nut so that all 3 servers would be monitored on the same web interface. The APC is attached to an older box running openSuSE 11.0 with nut-2.2.2-66.1. (nut-classic). The APC BP650 uses a serial connection