similar to: Smart Boot Manager.

Is this even a possibility? Both my brother and I have PPC G3 Mac's that we would like to install Linux on. I have downloaded a couple of Debian ISOs and a couple of Gentoo ISOs. All four would easily fit on a single CD. So, my question/problem is, is it possible to configure a menu to chose between them, that will boot up on a Mac PPC? Thanks, Lonnie -- Later, Lonnie Mostly Debian,

I don't know if this is even the proper place for my issue, but since the boot floppies that I have downloaded are syslinux based. I have a 97 vintage Hitachi laptop, and it won't boot newer CDs. It will, however, boot a Debian 2.1 CD. As we know, that version is quite old, and it booted off the second CD, not the first. What I want/need to know, is there a reasonable way for a

hpa etal, Im trying to get PIRT running on an SBC which has no CD-ROM drive. (an 8 MB ISO which demo's RTAI - RealTime Application Interface, on linux patched with Adeos) (BTW, PIRT uses isolinux) anyway, Im trying to use pxelinux to chainload / memdisk / mboot it, Im having no success. Ive also tried booting memtest86, which I can boot on my laptop using grub, ie title memtest

I''ve been trying to get either smartctl or sg3_utils to report properly. They both have the same low-level problems which leads me to suspect either I''m doing something wrong OR there is a problem in the marvell88sx / sd / SATA etc framework. I can access drive name/serial number of all drives on the SAT2 card and the temperature is returned from the IE log page on my two

Hello All, Could someone please tell me if there is a was to use smbadduser in a non-interactive mode and just allow you to enter all of the particular user information on the command line? I need to set up a small script that will automate adding users to the smbpasswd file so that they can login. Cheers, Lonnie -- Lonnie Cumberland OutStep Technologies Incorporated EMAIL:

I originally asked in a hardware/software forum, but, got basically no results. It occured to me that if anyone would know, it would be you people. What I'm wanting to do is set up a rescue disc for a really old laptop. It needs to boot up a linux based CD, hopefully with minimal to no working stuff on the harddrive (I plan to put a floppy image to be written to a disk when needed to do the

Hello All, I hope that you are all doing well. I have been trying to get Samba setup and running on my Redhat 7.2 box so that users on Windows machines can login and be connected to their directory. The problem is that no matter what I try, I can see the Samba server from the Windows machine, but it keeps telling me that the password was not recognized and is the same linux password for each

I am having a problem assigning write permissions to shares. I have joined my RHEL 4 server to our Windows 2003 domain and have gotten to authenticate through Active Directory. I can log on to the machine using my Windows AD account. However, any shares I create seem to be read only. I can't create files/folders in the shares or modify the documents from my Windows machine. One of my

Hello All, I have just been reading the docs on Wine and came across the --managed Allow the window manager to manage created windows --winver Version to imitate (win95,nt40,win31,nt2k,win98,nt351,win30,win20) Does the "--managed" allow my xserver to take care of the windows? Also, if I set "--winver nt2k" then does this mean that Wine will look for the

Hello All, I have installed the latest Wine onto my Linux Redhat 7.2 and it seems to run very well for the most part. I can easily map a Linux directory to a Windows drive, but I actually have a need to be able to map a linux directory to windows subdirectory. About the only way that I can currently think of that might work would be to use a symbolic link on the Linux subsystem. cheers, Lonnie

Hello All, I am new to using wine on my Linux redhat 7.2 so please forgive the dumb questions, ok. I have been able to run a few of my Windows Applications from wine as a test, but ran into problems when I wanted to try a test and install OpenOffice 641c. I am getting messages like: ---------------------------------------------------------------- bash-2.05$ wine c:\\install\\setup Warning:

Hello All, Well my Samba server is up and running good, but I am now needing to be able to let some of my users connect to our server who is not located on our local network. Actually they are located some distance away and I would like to be able to allow then to connect. Has anyone had any success with this and how it might be done? Best Regards, Lonnie -- Lonnie Cumberland OutStep

Hello All, I have recently switched back over from using the MySQL backend to the standard smbpasswd file in an effort to make our implementation of Samba better.\ I am still having a great problem with getting messages from the nmbd daemon saying that ------------------------ [2005/09/10 14:53:43, 0] nmbd/nmbd_packets.c:process_browse_packet(1050) process_browse_packet: Discarding

Hello All, I have been working with the latest release of Wine after finding out that the recent CVS version would not run because of some error in loading the user32.dll. Currently I have implemented the bitblt Maskblt routine and is working, but still experiencine some little problems with the masking of the icon images. While testing an application that I have been working with, I have found

Hiya, Is there any reason (and anything to worry about) if disk target IDs don''t start at 0 (zero). For some reason mine are like this (3 controllers - 1 onboard and 2 PCIe); AVAILABLE DISK SELECTIONS: 0. c8t0d0 <ATA -ST9160314AS -SDM1 cyl 19454 alt 2 hd 255 sec 63> /pci at 0,0/pci10de,cb84 at 5/disk at 0,0 1. c8t1d0 <ATA -ST9160314AS -SDM1

I am generating an outbound call through the Manager API and bridging it to an internal Extension, my problem is I am not able to find the logs for the call generated by the Manger API, Since on the same Asterisk server there are many users connected and I am receiving lot of Events back, not able to recognize which was the call generated by me as same time multiple users are dialing out.

greetings All, I have been reading over the Tinc manual and have become very interested in the "4.2 Multiple Networks" section of the manual. In particular, I am wondering if I read this correctly in that by using: `-n, --net=netname' Use configuration for net netname. then I can have multiple daemons running on the same machine. If I have 3 machines A, B, and C with A being

hello list, I switched to version 9 (not redhat) on my "new" server, and that worked. But after updating to 9.1, the virt-manger doesn't work anymore? There are only more error messages when opening the 2nd window for the settings. I hope someone on this list can help? It's a beloved tool which for me is the easiest way to create a KVM machine. thanks for any help, -- mit

We're using a storage solution involving two SunFire X4500 servers using DRBD to replicate a 15TB partition across the network with ocfs2 on top. We're sharing the partition from one server over NFS and the other is mounted read-only at present. The DBRD backing store is software RAID 60 on 40 disks. We've been seeing periodic issues whereby our NFS clients (Debian Lenny) are very

Thanks for getting back to me so quickly on this. In thinking about the topology that I am trying to set up, I will probably only set up a "private" DNS on the VPN for the 10.x.x.x users. With this in mind, I have now come up with a new question relating to this. What I will like to do is to give all of the uses, including roadwarriors, a static IP address on the 10.x.x.x address