similar to: ISOLINUX versions 3.36 and 3.53 can't boot VIA EPIA CL Motherboard, version 3.31 can

Hello! In spite of a number of complaints, I have tried to use a TDM400 on a Via EPIA-MII motherboard with a 1.2GHz C3 CPU. cpuinfo and interrupts are included at the end of this e-mail. I have had no problems with it so far that I can attribute to the computer. I have, though, had continual problems with a certain telephone... Anyway, this module currently has 3 x FXS modules and 1 x

Hello I am running Asterisk on SUSE Linux Professional 9.3 on a VIA Epia M Series motherboard - CPU runs at 1GHz. There is no fan - just a large heatsink. Currently system is running off standard IDE hard drive - because I couldn't get astlinux to run with my Digium TDM04B card (only PCI card in system). Strangely I also have the same system also running SUSE Linux running as a file

Hello, I've got an EPIA-M series motherboard in a system that has locked up twice under random conditions. Nothing is logged to the console or logs, the system just hangs. The system is installed with CentOS 4.4 and running the 2.6.9-42.0.8.EL i686 kernel. I am aware that older C3 processors had the CMOV problem, but that is resolved in the later boards (procinfo below). I've seen a

Hello AstLinux seems quite suited for my use. Can you configure more incoming port via a web interface? I'd like to install it to a "normal" hdd. Can that cause any problems? BR Amund Nygaard -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne av Kristian Kielhofner Sendt: 4. juli 2005 03:23 Til:

> Date: Sun, 19 Sep 2004 12:59:52 -0600 > From: Rich Adamson <radamson@routers.com> > Subject: [Asterisk-Users] Re: [Asterisk-Dev] X100p on VIA EPIA-V > problems > To: asterisk-users@lists.digium.com > Message-ID: <Chameleon.1095617288.adar0@vegas> > Content-Type: TEXT/PLAIN; CHARSET=ISO-8859-1 > > > I'm running Asterisk on my (new) VIA EPIA-V

I use them with just the one NIC card. I don't use them as a router so the phones and my gateway are all on the same network. -Jonathan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Remco Barende Sent: Tuesday, September 06, 2005 4:33 PM To: Asterisk Users Mailing List - Non-Commercial Discussion

Is that a bios setting (I don't recall seeing it) or an OS setting? I run a lot of Via C3 machines (they are so nifty) but don't remember seeing this. -----Original Message----- From: Technical Support [mailto:support@ocg.ca] Sent: Tuesday, September 06, 2005 10:43 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion'; shmaltz@gmail.com Subject: RE: [Asterisk-Users]

i had such problems on my mini-ITX. when sharing irq's with video or sound card, network traffic during ogg playing (for example on nfs) or quick moving windows crashed the interface. ifconfig down/up resolved the problem. it has been solved for a while now (i couldn't reproduce this problem) i think. regards, OLivier Le Jeudi 12 D?cembre 2002 03:45, The Anarcat a ?crit : >

Just to drag this thread on a bit further ... I've been looking into these little boxes, thinking I could use one as a firewall/gateway. My one requirement is that it would need to have two PCI slots (one can be low-profile), and although I've seen PCI riser cards that can give me two slots, they've been rare, and cases that are suitable (i.e have the space, and back panels are

Hi, I was wondering if anyone had a good dhcpd.conf and /tftpboot files for a EPIA-M motherboard with RedHat 9.0.... Or maybe just a configuration that works with the EPIA-M (doesn't matter which type of linux). I'm trying to boot the system from the network and it seems to be getting to downloading pxelinux.0 but then nothing happens after that.... I'm using ISC dhcpd V3.0pl2,

I have written a step-by-step setup for installing Asterisk on Debian using the VIA EPIA M platform. It is oriented to the Linux novice (myself being one). Feel free to use it :) http://www.steady-com.com/asterisk/debian-install.html

Hello I am using a VIA Epia ME6000 with a 600MHz Eden Fanless CPU. Is this likely to be enough power for a 8 extension system with 6 external pstn lines? How important is cpu? Is there some measure, eg xMHz CPU per extension or something benchmark? I have installed 512MB memory - again any benchmark for asterisk memory usage? Angus

In asterisk 1.2 branch SVN 51363 zaptel svn 1980 libpri svn 393 addons svn 332 My equipment is a Via EPIA minit-itx CN10000 1.2ghz, 1gb ram and a tdm400p (4fxo). A call comes from zap, a SIP ulaw receives the call, talks for a while and when SIP users tries to park the call, then dozens of... WARNING[3853]: channel.c:781 channel_find_locked: Avoided initial deadlock for '0x91bb840', 10

I'm trying to boot linux on a VIA EPIA-M board (a Nehemiah-based M10000), and I'm having some trouble with it. I'm watching the network transactions with ethereal, and I'm seeing a failure at what appears to be the tftp stage. The M10000 picks up its IP address from the dhcp server (ISC DHCP3), and reports it correctly on the screen. Then the tftp session starts, and I get the

Hello list, after spending the best part of an afternoon trying to build Asterisk on an old EPIA VIA C3, I thought that writing a tutorial would make life easier for future compilers: http://astrecipes.net/index.php?n=356 I had never compiled Asterisk for a different architecture, and I'm pretty disappointed at how complex it is - building Zaptel, Libpri and Asterisk requires

Is there any problems using this board? I have a dead board in a Book-PC (board size 10.5"x6") so am looking for a new board. Actually I want 2 LAN ports. 'Router' boards with enough umph to run Centos are expensive. I can pick up a VIA epia-m with 512Mb memory for $70 including shipping, so this is rather attractive option. I do have a 100Mb low-height PCI board that I

Greetings, I've been having a large number of deadlock issues lately on chan_sip occurring only on VIA EPIA ML6000 boards. I'm curious if anyone else is having similar issues. My Config (have multiple systems all running the same hardware with the same problem) VIA EPIA ML6000 1GB RAM 80GB HDD Various Digium Cards (T1 and TDM cards) Trixbox 1.2.2 (though running stock asterisk code)

Hi, haven't found anything in google's, i wonder if there is a comparative page of what to expect from running * on motherboards like the EPIA and similar ones. Since i have not used *ever* such kind of mini atx form factor boards, I have no clue about their performance. SIP-SIP communications, voicemail SIP-TDM communications, voicemail how may users (SIP hardphones and analog phones

I am confused (nothing new there ...). I have 2 Ubuntu 9.10 Samba servers. I am trying to mount a share from the other (i.e., "workhorse" is trying to mount a share on "dual-booter"). If I specify a smbmount command with a -k option, I can mount the share: turgon at workhorse:~$ klist Ticket cache: FILE:/tmp/krb5cc_1000 Default principal: turgon at DACRIB.LOCAL Valid starting

I created a deb file of WINE and it installs and works great for GutsyGibbon on my machine - I don't know about Feisty tho. 1.)In synaptic or apt-get do remove complete of the ol' wine version or else you might see when u open up the wine config in the about screen the ol' version. 2.)WARNING: after compiling it said something about not supporting scanners, etc... so if you don't