Displaying 20 results from an estimated 1000 matches similar to: "CentOS 5 problem with 2xRocketRaid 2220"
2019 Jun 24
0
Issue with dvd/cdrom drive
>
> [ 2.183682] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 2.183825] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 7.183893] ata3.00: qc timeout (cmd 0xec)
> [ 7.183908] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> [ 7.183960] ata4.00: qc timeout (cmd 0xa1)
> [ 7.183974] ata4.00: failed to IDENTIFY (I/O error,
2019 Jun 24
2
Issue with dvd/cdrom drive
>
> >
> > [root at darkness ~]# ls -al /dev/sr*
> > ls: cannot access /dev/sr*: No such file or directory
> > [root at darkness ~]# ls /dev/s*
> > /dev/sda /dev/sda3 /dev/sdb1 /dev/sg0 /dev/stderr
> > /dev/sda1 /dev/sda4 /dev/sdb2 /dev/sg1 /dev/stdin
> > /dev/sda2 /dev/sdb /dev/sdb3 /dev/snapshot /dev/stdout
> > [root at
2007 Sep 20
1
ata1 bootup errors
> ata1: port is slow to respond, this delay is known to occur on vacant SATA ports
> ata1: port failed to respond (30 secs)
> ata1: SRST failed (status 0xFF)
> ata1: SRST failed (err_mask=0x100)
> ata1: softreset failed, retrying in 5 secs
> ata1: SRST failed (status 0xFF)
> ata1: SRST failed (err_mask=0x100)
> ata1: softreset failed, retrying in 5 secs
> ata1: SRST
2007 Aug 02
1
usb 1-2: device not accepting address 2, error -71 - CENTOS 5
Hi all,
I installed CentOS 5 on DELL machine. Then, When the system comes up, I
always get below erros.
Could you pls help me to solve this out before I setup this box for
productiuon use ?
these are errors.
usb 1-2: device not accepting address 2, error -71
ata2: port failed to respond (30 secs)
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: SRST failed (status
2009 Jul 26
2
SATA DVD Burner / AHCI / CentOS 4.7 (kernel: 2.6.9-78.0.22.EL)
OK, it seems that the kernel I have (stock CentOS 4.7: 2.6.9-78.0.22.EL i686)
seems to gronk the nVideo SATA controller in AHCI mode. It is NOT able
to deal with the SATA DVD Burner I have. It is a "Sony Optiarc DVD
Burner with LightScribe Black SATA Model AD-7241S-0B LightScribe
Support". Is there some special magic I need to do? Here is the
relevant bit from the boot up (SATA ports
2007 May 28
0
VT6420 sata_via problem
Hello,
A message was already posted here regarding this issue-
I experience the same problem with 6 machines, all with Hitachi
harddrive, VIA Motherboard which uses the sata_via driver:
Once every few days each machine freezes or just stops reading from the
HD and throws i/o error messages as pasted below.
Note that the first "ata exception Emask" errors apear right after
booting,
2005 Jan 27
1
Raid driver for Highpoint RocketRAID 454
Anyone who know if there exist drivers for Highpoints RocketRAID 454 for CentOS?
I didn't find any on their site for RedHat Enterprise, which I tought would work with centos, so.. anyone?
http://www.highpoint-tech.com/USA/bios_rr454.htm
/H?vard
2013 Aug 16
0
RocketRAID cards (actually, solved)
If anyone's got old RocketRAID cards, I just had to deal with one. They
are years behind in updating their drivers - googling, I find the last
time some were supported was CentOS 5.2.
At any rate, I have just managed to build 1.8 of rr232x successfully, and
am building filesystems on the drive as I type.
I d/l the compressed tarballs from HighPoint's site. The changes to make
it compile
2011 Oct 31
5
Xen 4.1.1 HVM guest cdrom trouble, lost interrupts, ata failed commands (frozen)
Hello,
I was testing Fedora 16 (rc2) Xen host, with included Xen 4.1.1 rpms
and Linux 3.1.0 dom0 kernel. Fedora 16 PV domUs seem to work nicely.
I noticed a problem with Fedora 16 Xen HVM guests though.
The F16 guest kernel (Linux 3.1.0) fails with the qemu-dm emulated DVD-ROM drive..
Full HVM guest kernel dmesg attached to this email.
See the end of this email for Xen cfgfile for the
2005 Aug 08
0
Compiling kernel/drivers for hw RocketRaid 1640
I picked up a RocketRaid 1640 card b/c it had support for "RedHat".
Apparently, their version of "RedHat" is "stable"(9), which I pointed
out was "dead" for all security purposes... (at least, that was what I
understood from someone in one of the RH/clone IRC channels.)
It turns out that I need to build a new driver from their open source
code. This
2011 Mar 09
0
Re: "open_ctree failed", unable to mount the fs
Hi,
I''ve got similar problem - after HW failure - two of three disks became unavailable and now I''m unable to btrfsck.
Btrfs lays on /dev/sdb1,/dev/sdc1,/dev/sdd1 - sdc+sdd became unavailable
Here is kernel log:
============================================
MarĀ 9 23:56:28 ftp2 kernel: [121492.593338] ata7.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen
MarĀ 9
2013 Dec 05
4
Third-party SATA-RAID cards suggestions
Hi all,
Would anybody care to suggest a third party SATA-RAID card that works out of
the box with CentOS 6, without having to jump through hoops to make it work?
The card should preferably be able to connect ten harddrives, but I guess
three four-port cards should work as well. There's no need for anything fancy
really, as long as I can create a single big software-raid on it at CentOS
2008 Jul 13
1
Kernel Upgrade and RAID Card
Ok, I've got a RocketRAID 2300 and when i do the update of the kernel it
breaks the raid card since the OS is on the raid card itself, i need to
install the driver into the new kernel.. Whats the best way to do this?
I am reading the manual from the manufacter, but i dont see anything as
to a new kernel upgrade.
Thanks,
Ryan Nichols
2015 Aug 05
1
CentOS 5 grub boot problem
m.roth at 5-cent.us wrote:
> Bowie Bailey wrote:
>> I am trying to upgrade my system from 500GB drives to 1TB. I was able
>> to partition and sync the raid devices, but I cannot get the new drive
>> to boot.
>>
>> This is an old system with only IDE ports. There is an added Highpoint
>> raid card which is used only for the two extra IDE ports. I have
2003 Mar 07
1
PXElinux question - not in FAQ
Peter, we have met in Cyber space looong time ago, when I was requesting
10:minor numbers for the Netwinder project....
Now I am trying to build a network boot for Xandros distribution.
I have it working, however I need to do 2 DHCP cycles - 1 happens in
PXE, and then it repeats in my network boot code (based on BusyBox). All
I need in the second stage is the NFS image address, passed by DHCP
2004 Dec 21
1
smb_trans2: invalid data
Hello everyone,
I have tried to solve out the 'smb_trans2: invalid data' by 'unix extensions =
no' as it was written in one of the previous mails. Still I have a bad
problem:
when I mount like this:
mount.smbfs //server/service /local_dir -o
username=my_remote_login,uid=my_local_login,gid=users,rw
and then I try to copy a file to /local_dir as the user my_local_login, the
2009 May 29
1
feature request: winbind use cached credentials more agressively
Hi!
Winbind is rather suboptimally reacts to networking changes.
I use my notebook in at least 3 different network settings, in one of them I
have very probabilistic access to DCs
(cisco vpn client is a crap).
An nss lookup sometimes takes very looong, sometimes even returns failure.
Sometimes I have to login as root and restart winbind to get to my X session
past the screensaver. This is far
2009 Sep 29
1
Samba and NFS locking on Netapp filers ?
Hello
I have troubles with some shares that are NFS mounted to a Netapp
filer, if I enable locking on that share, the file cannot be opened
by the windows client in write mode ( read only after a looong time )
Anyone has the same problem , it seems to be a Netapp bug but
they do not support samba at all :-) so I don't expect any answer
from them.
thanks
2011 Feb 18
4
Recommendation for a Good Vulnerability Scanning Service?
Hi,
Can someone recommend a good vulnerability scanning service? I just
need the minimum for PCI compliance (it's a sort of credit card
processing certification).
I got a free scan from https://www.hackerguardian.com/ and their scan
reported a number of "Fail" results. I haven't checked them all yet
but most seem to be things for which fixes were backported looong ago
by The
2001 Apr 30
1
Some loglog density plot
Dear all,
A looong time ago, Witold Eryk Wolski asked here why there wasn't a
log="xy" parameter to the hist() function
<URL:http://www.R-project.org/nocvs/mail/r-help/2001/0267.html>, and
Prof. Ripley responded that a loglog histogram does not make much sense,
and that one should use a better density estimate if one seeks to plot
log density.
I understand the point and I