similar to: WPA question

Any hope of getting my laptop's Broadcom BCM94311 wireless running on CentOS 5? I find lots of references to using fwcutter to get the needed firmware from Windows drivers, but there's a Catch-22: Version of fwcutter that generate files for the bcm43xx driver in CentOS 5 don't recognize the md5sum of any currently available Windows driver. Newer versions of fwcutter

Hello, Maybe someone will run into the same problem, so here is how it works for me. I could not get work my wlan card (ralink rt61) with the driver from rt2x00.serialmonkey.com under CentOS 5 (2.6.18-8.1.1.el5). All drivers (beta and daily cvs) from this site freezes my system. So I get the driver from the Ralink support at http://www.ralinktech.com/ralink/Home/Support/Linux.html

Hi, A collegue of mine wants to go wireless at his home. Anyone got any buyer tips for a low-maintenance 54Mb brand/model and Centos? Kind regards Barrie

Hello, Does anybody knows if the rt61 driver from rt2x00.serialmonkey.com works under centos 5? And if so, what is the recommended command to build this driver from sources, 'make install' or 'make install-fedora'? Thanks a lot! I need this driver for my ralink wlan card on my notebook. I also could build this driver under a fresh centos 5 installation, but it freezes my notebook

I have been playing around with 3 ath based FreeBSD boxes and seem to have got everything going via WPA and a common PSK for 802.11x auth. However, I want to have a bit more certainty about things working properly. What tools do people recommend for sniffing and checking a wireless network ? In terms of IDS, is there any way to see if people are trying to bruteforce the network ? I see

first, the short form of the question -- has anyone got that wireless adapter working on centos 5.5 and associated with an access point that uses WPA/WPA2 security? and the details. in a classroom where there is *no* wired networking at all, all PCs have only that wireless net adapter, which works fine on windows but, after installing centos 5.5, unsurprisingly, we have no networking. there

Hi all! My thanks to the Centos team for continuing to slave away on C6 even with all the distractions!!! Just did a test install on my eeepc 901 (on an external drive, til I'm comfortable with it) and find that it doesn't seem to know how to talk to the ralink 2860 wireless chipset. A few months back I did a test install of Scientific Linux 6 and as I recall it (I may be

[desktop] ----- lan ----eth0 [notebook] eth1 192.168.?.? ` ----- wlan ---- [speedport(hub and router)] -- internet 192.168.2.x So on my laptop I have eth0 beeing lan, eth1 beeing wlan ethernet card. When only using eth0/1 everything is fine. Now I want to be able to use internet from both [desktop] and [notebook]. Typically you set up a bridge with

Hello again, At this school I am working we are setting up a wireless network. What would be the best way to set up the system to this network? How should we log in to Samba? What should I consider. The wireless system has already been purchased by people who have left. Kind regards Anna-Karin

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm

Hello, i have a little question. My system: ip route: 0.0.0.0/1 via 10.8.0.5 dev tun0 default via 192.168.2.1 dev br0 proto static metric 425 10.8.0.1 via 10.8.0.5 dev tun0 10.8.0.5 dev tun0 proto kernel scope link src 10.8.0.6 88.198.140.127 via 192.168.2.1 dev br0 192.168.2.0/24 dev br0 proto kernel scope link src 192.168.2.101 metric 425 192.168.122.0/24 dev virbr0 proto kernel

hi all, this is my first hit on the mailing list. hope i m posting in the right place. well, i have a dell vostro 1510 laptop with broadcom wifi adapter. n it doesnt work! :( i installed the wifi drivers with ndiswrapper. iwconfig shows the following. [root at laptop ~]# iwconfig lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. wlan0

Hi, My goal is to make use of samba 4 and freeradius to authenticate user to use wifi network (WPA2 enterprise). The setup is to setup Samba 4.0.3 in machine A and setup freeradius in machine B. By reading: Document A: http://wiki.samba.org/index.php/Samba4/beyond Document B: https://wiki.samba.org/index.php/Samba4/HOWTO/Virtual_Private_Network Document C:

Hi, My wife and I live in a two-storey flat, and we have a small home LAN (100% CentOS 5) with a "classical" configuration: On the ground floor, there is the telephone jack with the DSL modem router (192.168.1.254). This modem has a mini-switch with two Ethernet jacks to it, and the two are used by: - the server (192.168.1.1), a "black box" running in a cupboard 24/7 -

Hi! I'm messing about with an old Toshiba Tecra laptop. i've got wireless working well using NetworkManager and WEP. But I'm interested in finding out if it is possible to get WPA/TKIP or other WPA variants to work with that driver. According to dmesg, boottime diagnostics include: eth0: Hardware identity 0005:0004:0005:0000 eth0: Station identity 001f:0001:0008:000a eth0: firmware

Hi i have freeradius mschap ldap working configuration - i am using it for pptpd (VPN server) to authentificate against freeradius with ldap . Windows VPN client can connect to our company network and use it. Next i want to add user/password auth to our WIFI (based on Dlink AP - with radius support). We are currently using wpa-preshared key. i want to use wpa enterprise with ldap

I realize that many on this list have likely applauded the NetworkManager package split that removed wireless stuff into its own package, NetworkManager-wifi, because for wired workstations and servers it might be desirable to not have any wifi software installed. And I believe it was a sound technical decision to do the split. However, in doing a fresh installation of what most call CentOS

Hi, I am sharing my learning outcomes. Recently I downloaded Kali Linux 64-bit Version 2018.1 and ran it on my HP laptop with the integrated Intel Dual Band Wireless-AC 8260 Wireless Network Card. I wanted to test if I could hack the Wi-Fi WPA password on Ruckus R700 Access Point (AP) and the Aztech DSL8900GR(AC) Wireless Router. So I started using the Reaver WPA cracking tool. I understand

I previously had WPA radius authentication working from my laptop to my home network with the laptop running Fedora Core 6 and the server running freeRadius under CentOS 4.4 (freeradius-1.0.1-3.RHEL4.3). I'm attempting to move my FC 6 boxes to CentOS 5 so I decided to pick on the laptop first. Unfortunately, I neglected to backup /etc before doing the CentOS 5 install (bad Dave, bad

Hi , will be someone so kind and will provide mi howto, or working configuration of Acess Point WPA authentification using Radius Server . I have followed a lot of howtos, unfortunatelly no one works for me. Using Centos 5.1 . Thanks, Regards D. -------------- next part -------------- An HTML attachment was scrubbed... URL: