similar to: cbq down stream

Sub:[LARTC] cbq init for one port on a subnet Hello, We use cbq.init to limit bandwidth. It works great on a per-user basis. Now I''d like to limit traffic from a netblock to the Internet on port 6699. Network is 192.168.0.160 mask 255.255.255.224 eth0 is the gateway eth1 connects the netblock in question Is this the proper syntax; DEVICE=eth0,10Mbit,1Mbit RATE=100Kbit

Hi, In my LAN Iam trying to make following setup: - All the traffic generated by 10.0.2.1 should go to 10.0.2.11, If the destination of this traffic is internet than it should be placed on its interface eth1. Outgoing traffic on eth1 should be shaped.For this I am using fw filters and cbq. _______ 10.0.2.1 -------> 10.0.2.11(eth0 )----| A

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Guys Ive got an internet cafe on which I have a debian sarge box running. The Debian box acts as a gateway and it has masquerading on. I have 40 client PC and i do not want to assign more than 64k per pc for upload and the same is true for download too. Ive done alot of research and Ive read tutorials about CBQ and HTB. I found that CBQ.init is

About the cbq.init. Four machines which traffic to limit in same LAN. Is the samething if I put limiting rules to four different files or all to the same file? Like: DEVICE=eth0,10Mbit,1Mbit RATE=64Kbit WEIGHT=6Kbit PRIO=5 RULE=192.168.0.5 RULE=192.168.0.6 RULE=192.168.0.7 RULE=192.168.0.8 OR four equal files with different IPs, Ids and no PARENT rule? What style of ID numbering you use if

Hi, The CBQ config file shud be some thing like this. DEVICE=eth0,10Mbit,1Mbit RATE=50Kbit WEIGHT=5Kbit Shall i hardcode the DEVICE BW as 10/100 Mbit or Shall i use any other tool like ethtool for getting this. ethtool gives Speed: 10Mbps If so, how about, if i use some other Interfaces other than eth0, like ppp0 or some other? C''d anybody can give a suggestion over this? thanks

Which diference of I to use the CBQ and the HTB? I need priority a many ports.. same ports are 5060(voip),25(mail) and 3128(squid) It''s a my example off cbq arquive : DEVICE=eth0,10Mbit,1Mbit RATE=500Kbit WEIGHT=50Kbit PRIO=5 RULE=:5060 BOUNDED=yes ISOLATED=yes I need specific a rate or is not!? Igor _______________________________________________ LARTC mailing list

Hi, I''ve a small question about the cbq.init script. For a gateway I want to shape connections from special IP addresses to limit their bandwith. In my test environment I''ve too machines. One testclient with the IP 192.168.1.19. On my "shaper" (192.168.1.251) runs cbq.init with following config file: orthanc:/etc/sysconfig/cbq# cat cbq-4.ws-019

Hello all, I am testing CBQ and HTB these days and I got a lots problem which needs your help. It is a little long text :) Thank you! (All my test is based on Redhat Linux9.0) 1.Is isolated of CBQ working? I have read Mr. stef word that he never made cbq isolated work. 2. I have setup an environment to test cbq: one tcp flow which I should protect and a noisy udp flow who will eat much of the

Hi Iam using the script below to limit usage for the computers on my lan with respect to download and upload I have a 256kb up and 256 kb down connection, I want limit the speed of each computer to 64kbyte down and 32 up as a maximum. The script below works however it limits the up and down of the whole specified network to 64/32 ... what do I have to edit so that the script handles the requests

Hi Iam using the script below to limit usage for the computers on my lan with respect to download and upload I have a 256kb up and 256 kb down connection, I want limit the speed of each computer to 64kbyte down and 32 up as a maximum. The script below works however it limits the up and down of the whole specified network to 64/32 ... what do I have to edit so that the script handles the requests

Have a few generic questions about Kom-RSVP 1.) 11:00:05.175 WARNING: timer system overloaded, deviation is 30.080 sec - what timer is this referring to? System time? 2.) What is the relationship between the CBQ class created for RSVP traffic and the CBQ parameter that is in RSVP.conf? - ex. ### cbq qdisc ### tc qdisc add dev eth0 root handle 1: cbq bandwidth 10mbit avpkt 1000 mpu 64

Hi all, I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this, DEVICE=ipsec0,10Mbit,1Mbit RATE=128Kbit WEIGHT=10Kbit PRIO=5 RULE=192.128.1.0/24 Does it work or What else options need to be taken care like ipsec packets/protocol/port # etc.? C''d anybody suggest please? regds, Srikanth. _______________________________________________ LARTC

all: I"m just trying to create a simple rsvp session to familiarize myself with the protocol. I don''t ever get a rsvp RESV message only PATH AND PATH TEAR messages. There is a timeout but i''m not sure whats causing it exactly. Can anyone shed some light on why? All the configs and output are below. Please let me know if you need more information. Thanks. Jon Test

Hello Everyone :), i''m using cbq.init version 7.1 for traffic shaper, the rule did work well with flat rule (without parent/child)..here the condition of my network : - have a DMZ (and i not want the traffic to DMZ be bounded) - i made the CBQ engine also a bridge and i put it before NAT server (so if

While I''m thinking about that review of howto changes, here are a few other responses about things I don''t believe. I''ll be interested in more info if anyone has any. ==== [from new doc] Besides being classful, CBQ is also a shaper and it is in that aspect that it really doesn''t work very well. It should work like this. I''ve not noticed that it

If I create a cbq qdisc as a leaf of a cbq class, the bandwith rate is the same of the root cbq qdisc or the rate of the cbq class? Does exist the parameter rate on the "tc qdisc add" for cbq command? tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 10mbit avpkt 1000 cell 8 tc class add dev eth0 parent 1:0 classid 1:3 cbq bandwidth 10mbit rate 50kbit allot 1514 cell 8

Hi Ive been reading, testing and applying what Iam reading in the LARTC tutorial for a couple of days, I do not wish to use ready made scripts because that means I will always come back and ask the same question again. So Ive been wondering if I have 10 computers and I do want to limit the download for each of those 10 computers to 10 kbyte per second. I would create a leaf class and match the

Hi Ive been reading, testing and applying what Iam reading in the LARTC tutorial for a couple of days, I do not wish to use ready made scripts because that means I will always come back and ask the same question again. So Ive been wondering if I have 10 computers and I do want to limit the download for each of those 10 computers to 10 kbyte per second. I would create a leaf class and match the

hey guys i am regulating the traffic to & fro by my network through a linux gateway , its behaving strange. i regulated Downlink to 2Mbps & UPlLINK to 500Kbps. both perform well when those are done independent i.e. one at a time but when i do both from a client system ..the downlink however continues at 2mbps but the uplink falls down to 100kbps? is something wrong with my script or

here''s the output : # tc -s -d class show dev eth0 class cbq 1: root rate 10Mbit cell 8b (bounded,isolated) prio no-transmit/8 weight 10Mbit allot 1514b level 2 ewma 5 avpkt 1000b maxidle 23us Sent 294 bytes 7 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 605 undertime 0 class cbq 1:10 parent 1:1 leaf 10: rate 100Kbit cell 8b prio 1/1 weight 100Kbit allot 1600b