similar to: Rshaper Weirdness

Hello, We are managing the control of outgoing bandwidth using HTB. We are trying to use rshaper to control our incoming bandwidth. But the bandwidth doesn''t seem to come under the specified limit. We are not sure what we did is right. This is what we did. insmod rshaper.o rshaperctl 192.168.1.20 500 There were no errors. 192.168.1.20 is our IP in a LAN.

Hi Every One, I am using Linux 2.4 with 8390 Network driver. For configuring rshaper in one of the manual i have studied that need to insert the following line in Global space of Kernel. int (*net_shaper_rx_hook)(struct sk_buff *skb) = NULL; Can you suggest me anyone steps to insert the line and where in my Linux System. I am very new to kernel part. I am very greatful to you if any one

Sir, Kindly excuse me. I am a newbie to LARTC.. I am a small ISP in rural India distributing 1 MB link to 200 people. I have been using rshaper by Alessandro Rubini for shaping. http://freshmeat.net/projects/rshaper/ My kernel is Linux version 2.4.22-1.2115.nptl( Fedora Core 1) Rshaper is very good in controlling incoming bandwidth (from LAN) I use Squid also on this Linux Box.. Right

Hello All, I just thought that I would ask whether anyone here has experience using rshaper. If so I would love to hear input and pros/cons of using it. Cheers burke

I have spent a couple of days and quite some time during the nights googling and experimenting in pursuing subject objective and I feel like failing, if I cannot get competent help: My objective: boot a FreeBSD-package over the network by Systems lacking HW-Support for PXE My Testconfiguration: Server IBM-PC300 Client Siemes Fujitsu ErgoPro with freeBSD6.0 installed Network card in

Sir, I have one 2 MB link which I have to distribute to 200 people. Caching may enchance performance. Kindly suggest packages for this purpose under GPL. Regards, Rayudu. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

I have tried unsuccessfully to run both Shorewall 1.2.x, 1.3.x with Proxy ARP on a Red Hat 7.2 machine. The machine was configured as the external firewall as per the ''belt and suspenders'' layout given at http://www.skippy.net/linux/firewall/ The firewall appeared to function correctly in all functions except proxy ARP, however I must say I did not test exhaustively. After

>From: "Shawn Wright" <swright@sls.bc.ca> >Subject: [Shorewall-users] Finally making some progress >I *think* we are finally making some progress in tracking our elusive >performance problems. After employing a second 10Mb link from our ISP, >along with another firewall box and proxy, we were able to determine the >problem *is* our firewall. We don''t

Hi All, For my issue, first thanks to ALL, I have some idea of it. Also Thank Peter for his kind remind, I would become one good guy in this list. Most mentioned MTU, but how I assure that the problem is just MTU, how I debug it? Here is my bridge configuration: Internet | | Gateway | | eth0 Ethernet Bridge | eth1 | H u b ( one normal hub

Hi all! We use pxelinux for booting a diskless Linux from whitch we install all our systems. But we discovered some Problems: - With v1.75 the Kernel is fetched from the TFTP-Server with no problem, but it gets not started on Broadcom NetXtreme with newer PXE-Bioses - With v2.04, pxelinux even seems not to be able to fetch the kernel from the TFTP-Server. This affects also Intel's

Before anything else, let me state this: Of course it''s going to be PAINFULLY slow on MRI. That''s not the point :) I thought I''d try out writing out a Ruby version of the parser for the purposes of Rubinius. For those of you who aren''t aware, Ragel supports a goto-driven FSM on Rubinius by injecting assembly directly, and Rubinus head honcho guy Evan Phoenix

I have read thru what other users have tried in this list when they have experienced seemingly similar issues to what I have, without success. I suspect there might be an issue regarding both the X100P and TDM04b cards being used in an Intel SE7525GP2 motherboard, as I had to even wait for a BIOS update from Intel in order to utilize my 3ware 9500 SATA raid controller on it (3ware Kb -->

I figured I should post this because before I went to do it I searched the web for caveats etc and didn''t really find much. So anyway, I set up bonding + vlan for a project. Computer is dell powerdge 350 with 2 intel 82559 10/100 nic running stock 2.4.20. I tried both the eepro100 and the e100 drivers for the nics, both work 802.1q and bonding are modules. Switch is cisco 2924xl-en

HI zytor, I hope you can help me. I have above network chipset on a Mitsubishi im-2000 mobo. I don't see an actual chip on the mobo w/ this ID so I suspect it embedded in the mobo BIOS or in one of the 3 Intel chips. I am attempting to use LTSP to boot a workstation w/ above NIC chipset. It has imbedded boot to net software (Intel Landesk service agt v.99b) using PXE. I can't get it

Hello all, I have using htb for last 10-12 months to manage the bandwidth share. Until last month everything was ok, but now after a kernel upgrade (from 2.4.20 to 2.4.26 because a kernel bug that generate a oops) the Linux router is droping packets. It is weird because the "tc -s class ls dev eth1" (in the class I monitor) reports no packet drop, the "tc -s qdisc ls dev

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=339 ------- Additional Comments From scrizt@ludd.ltu.se 2006-06-26 17:57 MET ------- Is this bug forgotten ? Anyhow, I ran into it when setting up this strange network of mine.. I dont think my setup is causing anything strange however.. It appears even if no machine is connected to the "inner" port of the bridge.. I

I used pxelinux.0 to boot my kernel, then the kernel began to boot. However, it cannot mount nfs root. I checked the nfs root is exported OK! The last screen is as followed: serial sub-system self-test: passed. internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/dri ver/eepro100.html

Hello, I have problems with htb. The problem is that when I download any file via shaper with htb, the traffic is very dinamic, it jumps, for example: if i have set ceil = 128kbit the results that it jumps from 112kbps to 144kbps or smth like that maybe its not very bad, but when the traffic drops down to 40kbps or less and then after 1 or 2 seconds jumps to 144kbps, its bad :-( and it is often.

This sounds kind of like what happened with me for earlier attempts at using syslinux. Skip using HPA's tools entirely and dd if=vmlinuz of=/dev/fd0 bs=1440k count=1 and make sure that the kernel runs from a floppy disk. There'll be no file system or anything, but you'll make sure that your kernel isn't faulty. If it doesn't execute, then you can avoid the syslinux/pxelinux

Source: xen Version: 4.1.4-4 Severity: serious Tags: jessie sid User: debian-qa at lists.debian.org Usertags: qa-ftbfs-20130509 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: > gcc -O2 -fomit-frame-pointer -m64 -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes -Wno-unused-value