similar to: [OT] Ports bandwidth manager

In my search to control bandwidth on my network I found 2 projects.. 1. TC 2. BWM Tools - http://freshmeat.net/projects/bwmtools/ This brings me to 2 questions... Firstly, can TC control bandwidth in both directions? I read that it can only do 1 direction, which one I cant remember. Can you monitor the load on the queues you define? Does TC support IPv6? Secondly, BWM Tools seems to queue

Hi, I want to see bandwidth every ip address in the local network that passing my linux gateway in the console, may be it''s similar like mrtg (web based version) It''s possible ? Best regards, >--<Kristiadi Himawan>--<

Hi. I am trying to shape my upstream bandwidth, mostly per port. and I am having some problems getting things to work the way I want them to. before I throw my configuration at you guys ;), I`d like to debug it by myself - but I was not able to find a tool that allow me to monitor current bandwidth usage per port (and preferably even per port+ip). I want to know what is the current bandwidth

Hi, I''m new to HTB and CBQ, and i want to try it. But i failed the first step: load modules. I patch the kernel 2.4.17 succesfully, add QoS support, and all QoS scheds in modules instead off kernel. make clean dep bzImage modules modules_install copy the new kernel reboot fine But when i : server:~# insmod sch_htb Using /lib/modules/2.4.17/kernel/net/sched/sch_htb.o

Hi, I'm trying to install bwm on my Centos box without joy so far. # yum check-update # yum install bwm Gathering header information file(s) from server(s) Server: CentOS-3 - Addons Server: CentOS-3 - Base Server: CentOS-3 - Extras Server: CentOS-3 - Updates Finding updated packages Downloading needed headers Cannot find a package matching bwm No actions to take # yum search bwm Gathering

Hello Everybody, I have configured a Linux box that does traffic shaping. Its working wonderfully fine, just as expected...Now i want to measure the bandwidth consumed by each of my hosts....But I dont want SNMP to run on all the hosts[as required by MRTG] I used iptraf on my linux box, but it only measures the bandwidth on interface basis only.... I tried installing traffic-vis, its not working

hi there, I just wanted to share a recent discovery I did on how to setup a secure VPN implementation for linux 2.4.x (I''m using 2.4.20 but it should be working, as far as documentation states, for > 2.4.18) without using FreeS/WAN. The tool (ipsec_tunnel: http://ringstrom.mine.nu/ipsec_tunnel/, by Tobias Ringström) is a kernel module based on ipip and ip_gre. It uses CyptoAPI to

ok .. a use iptraf, but iptraf show my evry connection from computerX: 84.135.15.81:4899 > 163 7940 --A- eth0 ? 82.77.210.7:3475 > 212 323323 -PA- eth0 ? 62.231.96.133:80

Hi! I am studying HTB. I used the topology showed below: 10.1.0.1 ------ 10.1.14.25 (eth1) / 192.168.10.10 (eth0) ----- 192.168.10.11 (host 1) (router) (host 2) All machines use Debian Etch. Has a Iptables masquerading rule to eth1 in the router machine . The NICs are 100 Mb/s. The host 1 has Apache 2 and a file with 670 MB (CD ISO image) to download. When I used

Hello, I''m playing with tc, htb, and other QoS features on an old pc I have. The PC runs, by now, a shrinked version of Debian Woody, with patched versions of kernel 2.4.18 and iproute in order to support HTB. What i''m wondering is if with a AMD 100Mhz (stealed from a museum ;-), 16Mbps RAM i can do bandwidth management to 20 network hosts, which connect wirelessly (not all,

I am using HTB+IMQ on an Ethernet bridge and tc for statistics reporting. I am finding that tc reported rate is about 5-10% less than that reported by IPTraf for the same traffic. Has anyone observed this before? Which is more accurate? Rajesh

Hi, I am trying to do both ingress and egress bandwidth management on a bridge. eth0 is the WAN interface. IPTraf shows that the following script is running successfully and it limits bandwidth both ways to 256 KB However when I want to see the statistics using tc - it only shows me stats for htb class and not for ingress class. The tc output is as follows: tc -s -d class show dev eth0 class

I''m moving to a new place and my new flatmate wants a router because he likes the cleaness of it all in a non geeky way which I can understand. This means it''s going to be hard for me to pursude him to let me run a computer as a router to act as bandwidth cop. But I don''t fancy trying to use ssh, VNC and games while he''s using WindowsUpdate or p2p. So I need

Hello ! I use Slackware Linux on a box for routing and SNAT for a small network: |eth0: 80.97.108.1| | | |eth1: 192.168.1.1| ..........| my network (192.168.1.0/24)| I search for a tool show-me on real time the trafic made by all/one IPon the interface eth1, somethings simple ; EX: 192.168.1.10 ........... x kbit/s 192.168.1.11 ........... y kbit/s 192.168.1.12

I have tried using iptraf for my NAT firewall to analyse the IP traffic. Basically I am faced with this difficulty of related the source IP to the outgoing interface to the internet, so I am wondering if anyone has a suggestion for a different ways to do it, or a suggestion for a better tool. Details :- Supposed : eth0 - LAN eth1 - WAN1 eth2 - WAN2 And then

Hi! I''m doing load balancing for 5 dsl lines, each one with a dsl router attached to a linux machine ethernet plug. The problem is that I''m adding 15 more dsl lines, and I don''t have enough PCI slots in the linux machine to sum up 20 ethernet plugs (I already have 2 quad ethernet cards). So I''m considering connecting all dsl routers and the linux machine to a

I have a data set with 10 variables, and about 8000 instances (or objects/rows/samples). In addition I have one more ('class') variable that I have about 10 instances for, but for which I wish to impute values for. I am a little confused how to go about doing this, mostly as I'm not well-versed in it. Do I train the SOM with a data object that contains just the first 10 variables

Hi, I have to port ALTQ(Alternate Queueing) software form the FreeBSD to QNX. It''s more like a bandwidth manager. Since I am new to this domain, any kind of help will be useful. I have many doubts like * What exactly is a bandwidth manager * Where will it sit in the OS * How will it be implemented. Thanks in advance Prajith.

I have two adsl lines on my linux firewall box and i want to do some load balance between them...i tried a lot of different things, but it isn´t working...Following the instructions of http://lartc.org/howto/lartc.rpdb.multiple-links.html i used the configuration above. using "iptraf" I can see some few packets using the ppp1 connection, but almost all the packets use ppp0 connection.