Displaying 20 results from an estimated 1400 matches similar to: "RE: Routing based on source port - Solution ?"
2010 May 14
2
Samba and active Directory
hi all,
yes the good old topic where most people have a problem with :)
I have a Windows 2003 Active Directory Server und want that users on
this directory are able to login on a Samba Share.
The authentication with wbinfo -a user%password works and I already
joined the domain with
net ads join
I am also able to authenticate as directory user with his directory
password, BUT only if this
2006 Mar 08
3
What happened to the lartc mailing list?
I see it is posting to the archive website but not emailing them out.
Is anyone else getting emails or is it just me?
Thanks
- Greg Scott
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
2001 Oct 25
1
Why won''t this box route ICMP echo reply packets???????
Hi All -
I looked for mention of this in the archives but wasn''t able to find
anything.
This isn''t even an advanced routing question, it should be a dirt-simple,
basic, no-brainer, routine routing job. But I''m not getting it!
I have a Linux iptables based firewall system that is making me crazy. The
gist
of the problem is, even when I turn off all firewall rules
2005 Apr 05
0
RE: [squid-users] IE improperly prompts for credentials; ntlm_auth with Samba 3.0.13, Squid 2.5.STABLE7, RedHat Linux 9.0, SmartFilter 4.01; ticket number 48293
YES!!!!!!!!!!!!!!!
HOT DOGGIES!!!!!!!!!!!!!!!!!!!!!
I think I fixed it. The problem - Squid worked at my test site - it did
not popup a login window, but instead used Ssamba's ntlm helper program
to get credentials from IE. But at my customer site it did (improperly)
popup a login window. The squid.conf files were almost identical - even
to the point where my working test site incorrectly
2005 Apr 03
4
Smbd 3.0.13 dies when smb.conf has winbind separator = \
I am trying to get windind to work so my domain users can touch shares
on this Linux box without being prompted for credentials. I put these
in nsswitch.conf:
passwd: files winbind
group: files winbind
Then I did this:
cp /usr/src/samba-3.0.13/source/nsswitch/libnss_winbind.so /lib
ln --symbolic /lib/libnss_windbind.so /lib/libnss_winbind.so.2
Make libnss_windbind
2006 Jan 26
8
nat table remenbering nat''s
Dear All
Why NAT rules stays valid even if I flush nat anf table chains??
I have:
iptables -P FORWARD DROP
iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -s SOME_IP -d SOME_BCP_5_IP --dport 1234 -j ACCEPT
iptables -i nat -A PREROUTING -s SOME_IP -d MY_INTERNET_IP \\
--dport 1234 -j DNAT --to-destination SOME_BCP_5_IP
The conection is
2005 Apr 02
1
Using the RedHat 9.0 Samba 3.0.13 RPM with Kerberos 1.4 from MIT
Hello -
I have a problem where I need to authenticate a RedHat 9.0 system with a
Win 2003 domain. After days ot labor and tinkering, I keep getting this
error when trying to join my Linux box to the Win2003 Active Directory
domain:
[root@infra-fw etc]# net ads join -S 10.10.10.100 -U administrator
administrator's password:
[2005/04/01 21:24:41, 0] libads/kerberos.c:ads_kinit_password(146)
2017 Aug 15
2
hard-link reference error when trying to delete
Hello, all. I've encountered an odd error that I haven't been able to
identify and resolve myself. Hoping someone here could provide some
guidance.
I'm using the following command to rsync files between two servers, over
the internet (if that matters), via SSH:
rsync -ahu --timeout=600 --bwlimit=5120 -v -e "ssh -i /path/to/key"
--filter=". /path/to/filter"
2005 Apr 05
0
Informal HOWTO - transparent authentication and optional outbound web filtering using Samba 3.0.13, Squid 2.5.STABLE7, SmartFilter 4.01, RedHat 9.0 in a Win2003 AD domain
Thanks to everyone for all the help getting this done. As promised,
here are the detailed notes I put together. These step by step
instructions should work starting with a raw RedHat Linux 9.0 system.
- Greg Scott
GregScott@InfraSupportEtc.com
These are step by step instructions for how to install and configure the
Squid
proxy server with transparent authentication for users in a
2017 Aug 16
0
hard-link reference error when trying to delete
Have you tried doing the clean shell test?
ssh -i /path/to/key user at remote.server.com true > testfile
if testfile isn't 0 bytes then whatever is producing the data that ended
up in there is your problem.
On 08/15/2017 04:13 PM, jared via rsync wrote:
> Hello, all. I've encountered an odd error that I haven't been able to
> identify and resolve myself. Hoping someone
2007 May 30
4
Proxy ARP with a Coyote Point equalizer
Here is a puzzle.
I have a network with several servers. It''s a mess. It''s a /24 and
pieces and servers are all over the place inside this /24 block, on both
sides of the firewall. For example, the router at 1.2.3.1 is outside
the firewall and many of the servers at 1.2.3.nnn/24 are behind the
firewall. (Obviously, 1.2.3.nnn is a fudged network.)
eth0 points outward to
2007 Apr 18
3
lhype booting debootstrapped debian image over nfsroot, partial success
Hi!
Bored by previous lhype success, I tried to boot a debootstrapped debian
over nfsroot, and lo, this almost works!
Commandline:
# drivers/lhype/lhype_add 256m 0 ./vmlinux --tunnet=192.168.1.20
root=/dev/root nfsroot=/home/ahu/lhype-root
ip=192.168.1.21:192.168.1.20:192.168.1.20
This with lhype.patch current as of this message and 2.9.20-rc4.
The boot process stops after:
Starting periodic
2007 Apr 18
3
lhype booting debootstrapped debian image over nfsroot, partial success
Hi!
Bored by previous lhype success, I tried to boot a debootstrapped debian
over nfsroot, and lo, this almost works!
Commandline:
# drivers/lhype/lhype_add 256m 0 ./vmlinux --tunnet=192.168.1.20
root=/dev/root nfsroot=/home/ahu/lhype-root
ip=192.168.1.21:192.168.1.20:192.168.1.20
This with lhype.patch current as of this message and 2.9.20-rc4.
The boot process stops after:
Starting periodic
2011 May 04
1
issue with "strange" characters (locale settings)
WinXP-x32, R-21.13.0
Dear list,
I have a problem that (I think) relates to the interaction between Windows
and R.
I am trying to scrape a table with data on the Hawai'ian Islands, This is my
code:
library(XML)
u <- "http://en.wikipedia.org/wiki/Hawaii"
tables <- readHTMLTable(u)
Islands <- tables[[5]]
The output is (first set of columns):
2005 Apr 04
1
IE improperly prompts for credentials; ntlm_auth with Samba 3.0.13, Squid 2.5.STABLE7, RedHat Linux 9.0, SmartFilter 4.01
This turned into the mother of all system integration exercises and I
**almost** have it working.
I am trying to set up proxy authorization using:
RedHat Linux 9.0,
MIT Kerberos 1.4 built from source,
Samba 3.0.13 built from source,
Squid 2.5.STABLE7 built from source
SmartFilter 4.01.
Active Directory with Windows 2003
Why not use RPMs? Well - ADS support for Windows 2003 needs
2006 Jan 06
4
routing decision based on sorce port
Hello Routing Gurus ;-)
I''d like to know if it''s possible to make a routing decision for pakets
originating from a specific port of the local machine without using
ipfilter/iptables to mark the pakets.
I read about the tc filter stuff but that seems only to be able to sort
the pakets to a different queue on the same interface and not choose a
different interface for example.
Is
2002 Apr 22
2
RE: RTNETLINK answers: Invalid argument
Hi All,
concerning the problem when running the "ip ru ls" command.
I faced with the same problem, and I solved it by making sure to include the following settings into the kernel configuration (2.4.18):
CONFIG_IP_ADVANCED_ROUTER=y <===
CONFIG_IP_MULTIPLE_TABLES=y <===
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
2019 Mar 15
0
lua policy for Weakforce and web mail failed login attempts
The good news is I believe I got Weakforce running
1) curl -X GET http://127.0.0.1:8084/?command=ping -u wforce:ourpassword
{"status":"ok"}[
2) after running the sample for loop:
for a in {1..101}; do curl -X POST -H "Content-Type:
application/json" --data '{"login":"ahu", "remote": "127.0.0.1",
2011 May 05
1
issue with "strange" characters (readHTMLTable)
Thank you. The line of code you give certainly resolves several of the
issues.
I didn't realize that font support is such a tough matter to realize. Let me
express my gratitude to those who provide this for us in R.
On 04-05-11, Prof Brian Ripley <ripley at stats.ox.ac.uk> wrote:
Oh, please!
This is about the contributed package XML, not R and not Windows.
Some of
2007 Oct 26
2
[LLVMdev] LLVM Newbie. Questions about backend.
Hello,
I have been studying LLVM and started to create a new backend for a
new RISC architecture. Now I need some help to get forward with my
project. I'm quite new to compiling techniques so I'm sorry for the
stupid questions.
Question 1:
My idea is to lower the select SDNode as follows:
%res1 = %falseVal
%res2 = setc %trueVal, %condition
Where setc is conditional mov. The